See all parts that fit your 2009 Legacy
JL Audio 10w0v3-4 with hatch box and JX250/1 Bass Package
• Sensitivity: 84.07 dB
• Mounting depth: 4.90 "
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish

The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio's patented Elevated Frame Cooling design - all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.
The 10W0v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio XD300/1v2 or JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.65 cubic feet of air space in a sealed box and 1.125 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.
Priced Individually
JL Audio JX250/1D
250W RMS at 2 Ohms(160W RMS at 4 Ohms) JX Series Class-D 1-Channel 2-Ohm Stable Amplifier
Quantity: 1
1.2 Cu Ft - Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS1012)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (1.2 cu ft airspace 10SQTC)
Quantity: 1
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
|
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for. |
|
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Best selling similar products
Manufacturer:
Model Number:
10W0v3-4 JX2501D MDFS1012
Weight:
40.64lbs
Internal SKU:
10w0v34_jx2501d_mdfs1012
Internal Product ID:
172671
almost perfect
This box is exactly as it should be, connectors are good. But there was a large chip in the box when I got it. Looks like it had been dropped. Not sure where in the process this could have happened. But it is still sealed and works. If it did not have the chip, would be 5 stars.
110 found this helpful
Fantastic product
This box sounds, looks, and hooks up great don't hesitate ! It's holding a PPI 10 at 700 RMS and holds up extremely well no modification required.
103 found this helpful
Great product, good price
Quality sub box with a good price! Fast delivery . A pleasure doing business with Sonic
103 found this helpful
quality and economy
I like to make my own speaker boxes. However, it is quite time consuming to make a good one. That's why this is such a good product. It combines quality and economy of time and money.
101 found this helpful
Great box for the price
The carpet is kinda cheap and thin but I planned on recovering the box to match the rest of my trunk, making this a none issue. The important part was that the box is very well built, solid as a rock, and has the airspace for my cvr10.
100 found this helpful
Great little sub
I had one of these in a small sealed wedge box in a grand cherokee powered by a JL 100/2 amp bridged of course and it was great. Break in was short maybe 10 hours of play time and a bit of tweaking. Some settings every one thought i had a 12.
93 found this helpful
sounds great
I'm using this box with a cvr 10 (http://www.sonicelectronix.com/item_21882_Kicker-CVR102-10CVR102.html) because it was a little larger than the minimum recommended volume for my sub . It hits and is clean. I recommend getting it it's basically the same price/cheaper than building one yourself.
Only thing you need is some spray glue to reattach the polyfill you fold back to run the speaker wire from the terminal inside of the box.
93 found this helpful
I'm impressed, can't beat this box
I recently purchased this box to put a 10" Audiobahn AW-1051T (DVC 4Ohm; 800 peak watts, 300rms) sub in and this box has made my bass ridiculous. I drive a Hyundai Tiburon and coming home from work today the bass was hitting so hard it was tickling the bottoms of my feet. Now that means you've got some vibrations happening. I can't testify for the long term but from initial review you can't go wrong, especially at this price. I would definitely recommend to someone who doesn't want to lose a lot of trunk space for a huge box, but still wants great sound.
94 found this helpful
great sub!
Great sub for the price!! Sounds amazing and because of the room I have under the back seat the sub is in a box that is half the size that JL calls for. I couldnt imagine how great it would sound in the right box!
84 found this helpful
amazing sq!
I bought it for a sq build for decent kick drum thump, and it exceeded my expectations greatly. i was downsizing my build from two PSI 15's on 2kwrms, to this on ~320wrms am i'm not dissapointed! i built a box to jl spec but tuned to 28hz for a flatter, sq response curve. this dude dominates low lows and the xmax is ridiculous and no distortion! it is a very musical sub. the only downside is that i wish it had alittle tighter bass, but it could be the box, but my 6x9's in the doors handle that decently. buy this sub!
79 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.