Garage
Shop

MB Quart FA1-1500.1 + FREE 4 Gauge Wiring Kit

FORMULA Series Monoblock Class D 1500W 1 Ohm Stable Amplifier

MB Quart
Shop all MB Quart
highlight-star-icon

• FORMULA Series Monoblock Class D Amplifier
• 1500W x 1 @ 1 ohm / 750W x 1 @ 2 ohms / 375W @ 4 ohms
• DC Signal Sense
• FLUID-FETS
• Heavy duty heat-sink efficiently moves heat from the MOSFET
• Bass Boost: 0-12dB

Learn more about the fa115001_bak42

We apologize

This item has been discontinued

Description


MB Quart brand icon

Authorized dealer

MB Quart FA1-1500.1

MB Quart Formula series mono subwoofer car audio amplifier featuring innovative sound quality and power technology. The FA1-1500.1 is a 1500 watt 1 ohm stable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit. Bass remote is included.

MB Quart FA1-1500.1

FORMULA Series Monoblock Class D 1500W 1 Ohm Stable Amplifier
Quantity: 1

Product Details:

  • FORMULA Series Monoblock Class D Amplifier
  • RMS Power Output:
    • 1500W x 1 @ 1 ohm
    • 750W x 1 @ 2 ohms
    • 375W x 1 @ 4 ohms
  • The DC Signal Sense switch will allow the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off.
  • Variable electronic crossovers allow for complete control of the sound
  • FLUID-FETS are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers.
  • Heavy duty heat-sink efficiently moves heat from the MOSFET where it can be cooled
  • Variable Low Pass Crossover 12dB Per Octave: 50Hz - 250Hz (Variable)
  • Bass Boost: 0-12dB
  • Subsonic Filter: 10Hz - 40Hz
  • Variable Voltage: 0.02 - 9V
  • Signal to Noise: >90
  • Frequency Response: 15Hz - 250Hz
  • THD: <0.10%
  • Fusing: 25A x 4
  • Bass knob included
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
MB Quart FA1-1500.1 owner’s manual

Belva BAK42BL

4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - BLUE
Quantity: 1

Product Details:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 1200 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Black and Red
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Blue 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 80 amp fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge Blue chrome plated ring terminals
  9. One 4 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
375 watts x 1 channel
RMS Power @ 2 ohms
750 watts x 1 channel
RMS Power @ 1 ohm
1500 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total Peak Power Output
3000 watts
Total RMS Power Output
1500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<0.5%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
Switched
Low-Pass Crossover Frequency
50 - 250 Hz
Subsonic Filter
10 - 40 Hz
Signal-to-Noise Ratio
>90 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
25A x 4 
CEA-2031 Compliant
No
Amplifier Kit Specifications
Number of Amplifiers Supported
1
Power/Ground Wire Size
4 gauge
Power Wire Length
17 feet
Ground Wire Length
3 feet
Speaker Wire Included
Yes
Speaker Wire Length
20 feet
Remote Wire Length
17 feet
Interconnect (RCA) Signal Cables Included
2 Channel
Fuse Holder
Mini ANL
Fuse Size
80A
Distribution Block Included
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BAK42,FA1-1500.1

Weight:

5.60lbs

Internal SKU:

fa115001_bak42

Internal Product ID:

175523

Customer Ratings & Reviews



5 star
72%
4 star
26%
3 star
2%
2 star
0%
1 star
0%



Durability
4.8
Value
4.9
Features
4.7
Design
4.9
Usability
4.8

Customer Reviews

Sort by:

Loading...

BELVA amp kit

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Not much to say, its an amp kit. Great value.

By Derek on September 19, 2014

109

found this helpful.

Good kit on a budget

The following review is for BAK42BL, which is a part of the bundle you are viewing.

I bought this kit for a buddy of mine to do a small install in his 1999 Lumina. It's very flexible and more than enough for his little daily pounder setup.

By Randominstaller on September 28, 2014

105

found this helpful.

great product

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Works great nice tight packaging and you get everything you need for your amp. Also it is true 4 gauge wire unlike some kits that advertise the wrong gauge wire this one is correct the correct size they say. Will buy again

By Jamal on August 29, 2014

105

found this helpful.

Belva BAK42BL

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Disregard the rating for durability because I have only had this product installed for a week. This kit is quality for the money. The wiring is a little sparse for 4 gauge, but it's definitely not 8 gauge in a 4 gauge sleeve. Loses one star for ease of use because the ring terminals must be crimped on by the user (which may be difficult if crimpers or a vice are not accessible to the user). Overall, I would recommend this to anyone on a budget or looking for a wiring kit for their first system.

By Dave on July 27, 2014

104

found this helpful.

Beat kit for the $$

The following review is for BAK42BL, which is a part of the bundle you are viewing.

I ran this to my 1200 watt sony amp with 2 1000 watt pioneer subs in a sealed box . And let me just say everyone in my neighborhood can hear me before they see me. I'm only at about 75% gain . I may but 1 or 2 more as back up for the future . People said the fuse holder dosent fit , I didn't use it , but all you have to do is back the set screw all the way out and slide out the inner holer and it will fit perfectly.

By KileFTP on October 15, 2014

99

found this helpful.

very easy

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Bad thing is i had to buy extra gauging, metal pieces besides that everything is fine but if you want good cables buy(OFC) 1/0 gauge wiring itll save you time and money

By eduardo on April 13, 2014

99

found this helpful.

Good Wire

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Nice set. everything worked fine. Wire lengths were fine for installing in SUV. Would Buy again ... and have :)

By BerGyver on May 11, 2015

86

found this helpful.

my amps is west coast customs 1500 ccwith belva kit

The following review is for BAK42BL, which is a part of the bundle you are viewing.

I install my amplifier am the one one do it myself today I used terminator mtx dual 1200 watts tne212d very nice sound am so happy with it if you familiar with electronic stuff you can do it yourself cause best buy was going to ask me 400 dollars the more you learn the better you feel don't let nothing stop you from learning am very happy with west coast customs any of you who think of buying a amplifier you wont dissatisfied thank you sonic electronic and maxsonic who made west coast customs 1500 cc am out hiting the road cuise around with my Volvo xc70

By armel brizard on June 13, 2015

69

found this helpful.

Belva BAK42BL (Blue)

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Good wires. Is four gauge wire and good speaker wire.

By Rick on June 7, 2015

67

found this helpful.

Well Built

The following review is for BAK42BL, which is a part of the bundle you are viewing.

Very flexible and not thin. This wire is the right size nothing skimped. RCA cables meet expectations, a nice fit. Dark blue as opposed to bright red. Hides well.

By David on June 2, 2020 Checkmark Icon Verified purchase

52

found this helpful.

Similar Products

Best selling similar products

Kicker 46CXA3604 + 6.5" Coaxial Speakers (2-Pairs)


•65 watts x 4 channel @ 4 ohms
•90 watts x 4 channel @ 2 ohms
• Bridged: 180 watts x 2 channel @ 4 ohms
•Total RMS Power: 360 watts
• Class A/B 2 ohms Stable 4-Channel Amplifier
• Includes Two Pairs of 6.5" Series Coaxial Speakers

(83)

$327.88

Rockford Fosgate Prime R2-1200X1 with Amplifier Wiring Kit

• 400 Watts RMS x 1 @ 4 ohms
• 800 Watts RMS x 1 @ 2 ohms
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

(120)

$409.99

Pioneer GM-D1004 with Amplifier Wiring Kit

• RMS Power: 45W x 4 @ 4 ohms, 45W x 4 @ 2 ohms
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 7-1/8" W x 2-1/2" D x 1-1/2" H

(37)

$139.99

NVX NDA11005 with Amp Wiring Kit

• + @ 4 ohms
• + @ 2 ohms
• Bridged: @ 4 ohms + @ 2 ohms
• Total RMS Power:
• Class Stable -Channel Amplifier

(44)

$269.99

Rockford Fosgate R500X1D Amplifier + Free Belva BAK42BK 4 Gauge Amp Kit

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

(60)

$279.99

Rockford Fosgate Punch P500X2 + NVX XLCA2 Line-Output-Converter + Amp Kit

• 150W x 2 Chan. @ 4 ohms
• 250W x 2 Chan. @ 2 ohms
• Built In NOMAD "Real Time" Analog Computer
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

(52)

$421.99

Pioneer GM-DX871 + Belva BAK42

• 300 Watts RMS x 1 @ 4 ohms
• 500 Watts RMS x 1 @ 2 ohms
• 800 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1600 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• HQ Sound Parts
• Gold-plated RCA connections
• 10-3/8"W x 2-3/8"H x 7-7/8"D

(165)

$139.99

Alpine KTA-450 with 6.5" + 6x9” SXE Speakers

• 50 watts x 4 channel @ 4 ohms
• 45 watts x 4 channel @ 2 ohms
• Bridged: 100 watts x 2 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
• Includes 6.5" + 6x9” SXE Coaxial Speakers

(31)

$294.85

Diamond Audio DMD500.1D with DMD122 Sub

• 340 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
• Includes 12 inch Subwoofer

$469.99

Alpine R2-A60F with 6.5" + 6x9” Coaxial Speakers

• 100 watts x 4 channel @ 4 ohms
• 150 watts x 4 channel @ 2 ohms
• Bridged: 300 watts x 2 channel @ 4 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable 4-Channel-Channel Amplifier
• Includes 6.5" + 6x9” Series Coaxial Speakers

(5)

$1049.85

Related Searches


Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon