(2)Rockford Fosgate P1S2-12 + NVX VADM2 + Free Dual Enclosure and Amp Kit

Product Details:

• 12" Single 2 ohms Punch P1 Series Subwoofer
• Power Handling:
• Peak: 500 watts
• RMS: 250 watts
• Kevlar Reinforced Pulp Paper Cone
• Nitrile Butadiene Rubber NBR Surround
• High-temp voice coil with spun-laced Nomex® re-enforcement collar
• Linear spider with embedded 16 AWG tinsel leads
• Custom 10-AWG nickel plated push terminals
• StampCast basket with integrated spider venting
• Rubberized ABS trim ring
• Extended pole piece and bumped vented backplate
• Protective PVC textured magnet cover
• 2" High Temperature Voice coil
• 9.0 mm Xmax
• 45 oz. Single Stacked magnet motor structure
• Frequency Response: 20 - 250 Hz
• Resonance Frequency (Fs): 25 Hz
• Sensitivity: 86 dB
• Recommended sealed box volume: 1.02 cubic feet
• Recommended ported box volume: 1.79 cubic feet
• Top-mount depth: 6"
• Cutout diameter: 11.22"
• CTA-2031 Compliant
• Authorized Internet Dealer
• Optional protective subwoofer grille (sold separately) Rockford Fosgate P1G-12
• 1-year Manufacturer's Warranty



Priced Individually

Product Details:

• V Series Class D 2 ohms Stable 2-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 200 watts x 2 channel
• 2 ohms: 300 watts x 2 channel
• Bridged: 600 watts x 1 channel @ 4 ohms
• Total power output: 600 watts
• LED Power/Protect Light
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• 4-way protection circuitry (thermal, overload, speaker short protection and DC offset)
• Balanced differential inputs eliminate noise picked up by signal cables
• Selectable crossover modes: FULL / HPF / LPF
• Input sensitivity:
• Low level and High level: 0.2 - 10 volts
• Frequency Response: 20 - 20000 Hz
• Total Harmonic Distortion (THD): <0.1%
• Signal to Noise Ratio: >85 dB
• Variable high-pass filter: 40 - 400 Hz
• Variable low-pass filter: 40 - 400 Hz
• 8 AWG gauge amplifier wiring kit is recommended for installation
• Dimensions: 6.49" L x 3.3" W x 1.48" H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• MFR #: VADM2v2

Built for Bass

You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.

You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.

	Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.

General Features:

• Dual Sealed 12" Enclosure
• Internal box volume: 2.5 cubic ft. total air space - 1.25 cubic ft. per chamber.
• High Quality 3/4" MDF Construction
• Durable black carpeting
• Pre-lined with Poly-Fil
• Seams are fully caulked for better efficiency
• 2 Separate chambers allowing each subwoofer its own air space
• Gold post terminals for clean and easy wiring access
• Box Dimensions: 28" Wide, 14" Depth, 14" Height
• 30 Day return policy

Product Details:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Belva CCA wire is made from 30% copper while the competition uses only 10%
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
• Complies to American Wire Gauge standards
• Also available in Black and Red
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
6. One MINI-ANL Fuse Holder with a 80 amp fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties