1500W Peak (750W) RMS N-Series Class-D 1-Ohm Stable Monoblock Amplifier
• 310 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• 750 watts x 1 channel @ 1 ohm
• Total RMS Power: 750 watts
• CEA-2006 Compliant
• 0 to +12 dB bass boost
Choose from any of our many bundles that include this product for even more savings!
NVX NDA102 with Amplifier Wiring Kit
1500W Peak (750W) RMS N-Series Class-D 1-Ohm Stable Monoblock Amplifier
(37)
$149.99
• 310 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• 750 watts x 1 channel @ 1 ohm
• Total RMS Power: 750 watts
• CEA-2006 Compliant
• 0 to +12 dB bass boost
Extreme Efficiency
The NVX NDA102 is a Class D amplifier utilizing a small but efficient MOSFET transistor. MOSFET amplifiers are designed to process digital signals with a lower power consumption. By using less power, MOSFET amplifiers lose less energy to heat dissipation. As a result, Class D amplifiers such as the NDA102, have a higher efficiency rate of 90% compared to their AB class counterparts that feature an efficiency rate of 50 to 70%.
User Control
The NVX NDA102 is equipped with a wired remote bass level control. This feature allows the user to conveniently make adjustments to the bass levels on a song-by-song basis without having to adjust the gain setting directly on the amplifier itself. The knob also allows the user to tune the bass level precisely to help ensure the highest sound quality possible is achieved.
Assured Quality
The NVX NDA102 is constructed to meet the highest quality standards. While other amplifiers on the market often inflate their specifications, the NDA102 is tested using the Consumer Electronics Association’s ratings test. This means that all specifications listed for the NDA102 are accurate for peace-of-mind. The NDA102 also uses threeway protection circuitry, protecting not only the amplifier, but the entire sound system from thermal, overload, and speaker shortages. This helps increase the longevity of the sound system as a whole.
Internal Product ID:
181081
B. A. F
One of the best built speakers I have ever put my hands on. Good job guys
12
found this helpful.Very happy with this amp.
I built a custom sealed box for behind the back seat of my f250 with a Kicker L7T122. I am using this amp wired down to 1 ohm. After a few week break in period I started cranking up the amp a little bit and it hasnt fazed it at all. It puts out plenty of power to push this sub as hard as it wants to be pushed. Has barely even gotten warm. I do not have a way to test the actual power output, but it has to be at least close to what is claimed. Im quick to talk about the amp when people ask about my system. This is my first NVX product, but barring anything catastrophic, definitely will not be my last. Quality product at a very reasonable, if not bargain price.
9
found this helpful.Bang 4 Ur Buck...
I'm running this amplifier @ 1ohm on a NVX VSW122v2 in sealed enclosure. It sounds great and will hit hard & low. Stays cool and has not shut down on a 4ga amp kit. For the price, I think it's a great deal.
9
found this helpful.NVX NDA102 (and VAD10001)
This is my second NVX amp. (I have the first, a VAD10001, pushing 1000 watts to a 12" Alpine type R at 1 ohm and love it). My plan is to use this one to push a 12" Alpine Type S at 2 ohms in my sons car. So far i have only hooked it up on the table to make sure it works (no problem). But I have no doubt this thing will be awesome. Its a tank compared to the VAD, not overly large, but heavy and solid. Great connections just like the VAD. And no searching for the right allen wrenches since it comes with everything. (That may sound stupid, but i like leaving the wrenches in the vehicle just in case i ever need them.) I mounted the control under my seat for the VAD. I will probably put the control for the NDA in the dash panel by the fog lights switch.
8
found this helpful.Great budget sub!
Got this sub for a little over $100 with a coupon code and for a 750w amp, nothing can touch it at this price point. Have been using it so far for a week and I’ve had no issues other than it going randomly into protection mode but a quick turn off and back on fixed it. Currently using it to power a 10” Kicker Comp, but plan on going to a 2 8” Sundown SA setup. Overall, great purchase!
8
found this helpful.NVX NDA102
All I can say is WOW!!! Powerful amp , a helpful hint do not mount completely flat, it has vents underneath to help keep cool. True 750 rms watts at 1 ohm. NVX is top notch.
6
found this helpful.Great amp for the price
Got this amp to power a Pyle plsq12d subwoofer and it does so perfectly
2
found this helpful.Best selling similar products
• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H
(27)
$279.99
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
(33)
$164.95
• 380 watts x 1 channel @ 4 ohms
• 600 watts x 1 channel @ 2 ohms
• Total RMS Power: 600 watts
• Class D 2 ohms Stable Monoblock Amplifier
$219.00
• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(24)
$239.99
• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier
(1)
$99.99
Save up to 10 different vehicles in your garage