Pioneer TS-A2000LD2 + Alpine Monoblock Amplifier + Amp Kit

8” Dual 2-Ohm Shallow-Mount Subwoofer + Alpine MRV-M500 Amplifier

Pioneer
Shop all Pioneer
highlight-star-icon

• 700 Watts Max / 350 Watts RMS
• Impedance: Dual 2 Ohm
• Glass Fiber and Mica Reinforced IMPP Cone
• Double Reinforced Spider
• Rubber Surround

Learn more about the tsa2000ld2_mrvm500_bak44

We apologize

This item has been discontinued

Description


Pioneer

Authorized dealer

Pioneer TS-A2000LD2

700W Peak (250W RMS) A-Series 8” Dual 2-Ohm Shallow-Mount Subwoofer (700 Watts Max)
Quantity: 1

Product Details:

  • Pioneer TS-A2000LD2
  • A-Series 8” Dual 2-Ohm Shallow-Mount Subwoofer
  • Power Handling
    • Peak: 700 Watts
    • RMS: 350 Watts
  • Impedance: Dual 2 Ohm
  • Glass Fiber and Mica Reinforced IMPP Cone
  • Double Reinforced Spider
  • Rubber Surround
  • Small Enclosure Use (0.15 ~ 0.5 cu. ft.)
  • 8-AWG Push Terminals
  • Sensitivity: 83dB
  • Frequency Response: 20Hz - 1.4kHz
  • Dimensions:
    • Mounting Depth: 2-5/8"
    • Cut-Out Diameter: 7"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Check out the Pioneer TS-A2000LD2 Owner's Manual

Alpine MRV-M500

1100W Peak (500W RMS) V-Power Series Class D Monoblock Amplifier
Quantity: 1

Product Details:

  • V Power Series Class D 2 ohms Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 300 watts x 1 channel
    • 2 ohms: 500 watts x 1 channel
  • Total RMS power output: 500 watts
  • LED Power/Protect Light
  • Wired bass level remote control with optional Alpine RUX-KNOB.2
  • Speaker-level (high-level) inputs
  • 1 pair of pre-amp outputs
  • Signal sensing remote turn-on
  • 4-way protection circuitry (Over-Current, Over-Voltage, Under-Voltage, and Thermal Protection)
  • Input sensitivity:
    • Low level: .15 - 4 volts
    • High level: .4 - 10 volts
  • Frequency Response: 7 - 400 Hz
  • Total Harmonic Distortion (THD): .3%
  • Signal to Noise Ratio: 85 dB
  • Variable low-pass filter: 50 - 400 Hz
  • Variable Bass Boost: 0 - 12 dB
  • Fuse Rating: 60
  • 4 AWG gauge amplifier wiring kit is recommended for installation.
  • Dimensions: 7-7/8" L x 7-7/8" W x 2-3/16" H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
  • MFR #: MRV-M500
Check out the Alpine MRV-M500 Owner's Manual

Belva BAK42BK

4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - GRAY
Quantity: 1

Product Details:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 1200 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue and Red
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Gray 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 80 amp fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge Blue chrome plated ring terminals
  9. One 4 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Product history:

Pioneer TS-A2000LD2, MRVM500, BAK42 thumbnail
(newest, current model)
Pioneer TS-SW2002D2 thumbnail
(previous model, replaced by Pioneer TS-A2000LD2 + Alpine Monoblock Amplifier + Amp Kit)

Specifications & Details


Subwoofer Specifications
Series
TS Series
Subwoofer Size
8"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
2 ohms
RMS Power Handling
350 watts
Peak Power Handling
700 watts
Woofer Surround
Rubber
Woofer Composition
Polypropylene-Mica
Sensitivity
83 dB
Frequency Response
20 - 1400 Hz
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

TS-A2000LD2, MRVM500, BAK42

Weight:

13.16lbs

Internal SKU:

tsa2000ld2_mrvm500_bak44

Internal Product ID:

181639

Customer Ratings & Reviews



5 star
87%
4 star
8%
3 star
5%
2 star
0%
1 star
0%



Durability
4.8
Value
4.9
Features
4.7
Design
4.9
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

Quality Product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Works very well with my Rockford Fosgate sub system in my car.

By Ronald on December 11, 2014

81

found this helpful.

good deal!

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Pretty decent value for the price. Worked out great, thanks.

By Brett on January 29, 2015

78

found this helpful.

Usable

The following review is for BAK42BK, which is a part of the bundle you are viewing.

The wiring has done me right so far but the only thing I don't like is the speaker wires. You have to carefully split it so the wire doesn't show. Other than that minor thing everything was great and a great value!

By tyler on November 18, 2014

76

found this helpful.

Really good

The following review is for MRV-M500, which is a part of the bundle you are viewing.

Have this amp connected to my Dodge factory head unit using high level output connected to 2- 12inch pioneer champion series at 300 RMS 4ohm. unbelievable quality and sound. Once you tune your subwoofer and amp to specs you wil have no problem. more that enough bass needed, Great amp!!

By Ricky on July 29, 2014

71

found this helpful.

Alpine MRV-M500

The following review is for MRV-M500, which is a part of the bundle you are viewing.

My buddy had 1 of these running to pioneer 10s and it sound great Hit pretty hard great amp over all.Probably does a little more then rated 550/600 maybe.Very clean looking amp sturdy feeling and great clean sound

By josh on March 17, 2014

67

found this helpful.

The perfect amp for my needs!

The following review is for MRV-M500, which is a part of the bundle you are viewing.

This little amp puts out just the right amount of power for my system. I mounted it behind an internal side panel so that it would be out of sight, and it fit perfectly. I haven't had any problems with it what so ever, and it really brought good sounding base to my sub woofer. I would definitely recommend this amp to my friends.

By Gregar on January 14, 2015

63

found this helpful.

Accessories for product

The following review is for BAK42BK, which is a part of the bundle you are viewing.

Just what I needed and made installation so much easier. Thanks

By Susie on February 9, 2015

63

found this helpful.

price is right

The following review is for BAK42BK, which is a part of the bundle you are viewing.

the price is right for this setup. the ground wire and the power wire are to big for my amp but i made them fit. better to have to much than not enough so if i upgrade to a larger amp it will be fine.

By Mark on November 13, 2014

68

found this helpful.

awesome products

The following review is for BAK42BK, which is a part of the bundle you are viewing.

I run 2 12inch audiobahn exursions on this amp and it pushes them very well. The size is perfect not to big and fits right unerneath the seat or small space. The best part is it stays pretty cool even after running most the day.

By CJ on March 22, 2015

57

found this helpful.

Big power with little space

The following review is for MRV-M500, which is a part of the bundle you are viewing.

Not a bad little amp. I run 2 kenwood 12's @ 2 ohm with this amp and I love every minute of it. I am sometimes tempted to turn the gain down but it runs so clean I never do.

By Drum4life on April 8, 2014

54

found this helpful.

Add-ons


Similar Products


Best selling similar products

Belva BPKG212v2 Complete Amplified Bass Package

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(75)

$249.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(150)

$279.95

Belva BPKG110v2 Complete Amplified Bass Package

• Works with both Factory and Aftermarket Audio Systems
• Single 10" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(24)

$129.99

Cerwin-Vega BKX212S

• XED Series Bass Package
• Two 12" Subwoofers with 2" Voice Coill
• 400W RMS Monoblock Amplifier
• Carpeted and Embroidered Enclosure

(1)

$329.99

NVX VAD27001 with (2) VCW124

• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H • RMS Power: 1200 Watts Each
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(141)

$621.97

Related Searches


TS-A2000LD2, MRVM500, BAK42 small

Item added to your cart.

Price: $281.04

Essential add-ons
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$129.99

Add to cart
Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

$79.99

$59.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$197.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back