Access exclusive offers, news and more.
800W Peak (400W RMS) 10" 55 Series Dual 4 Ohm Subwoofer + 10" Subwoofer Enclosure and Speaker Wire
• 800W Peak
• 400W RMS
• Dual 4 ohm Voice Coil
• Polypropylene Cone
• Rubber Surround
• Spider Plateau Venting Mechanically Cools the Voice Coil
• Radial Ribbed T-Yoke Dissipates Heat and Decreases Distortion
The MTX Audio 55 Series subwoofers are the perfect solution for improving your car sound quality while taking up little space. Their low profile means they do not need a large enclosure and will still deliver powerful bass. How do they do this? With an improved surround compared to traditional Half-Roll surrounds, expanded surface area and reduced distortion due to progressive suspension controls. With over 40 years of audio experience, MTX Audio makes sure and knows how to create quality audio with their products, and the 55 Series is no exception!
The MTX Inverted Apex Surround increases the surface area of the sub to allow for more air movement, accurate bass reproduction and higher SPL. Traditional Half-Roll Surrounds have an inherent wrinkling when reproducing bass due to the physics of its motion, which causes distortion. The Inverted Apex Surround moves symmetrically through both positive and negative cycles which eliminates this type of distortion.
Progressive Suspension control the excursion of the subwoofer at high power levels which reduces distortion. Eliminating this 3rd order distortion means you can play your music loud and rely on your subwoofer to take of itself.
Two features really make sure the MTX subwoofers stay cool: the Spider Plateau Venting and the Radial Ribbed T-Yoke. The Spider Plateau Venting is a mechanical cooling process that targets cool air at the voice coil. This means the subwoofer cools itself as it is playing. The Radial Ribbed T-Yoke acts as a heat sink that dissipates heat and decreases distortion.
Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.
(newest, current model)
(previous model, replaced by MTX 5510-44 Subwoofer + Belva MDFS10 and Speaker Wire)
(previous model, replaced by MTX Audio TR5510-44)
5510-44, MDFS10, BSW127
Internal Product ID:
Could have a better way to decide which wire to use as positive or negative. Only has spaced print on one wire.
102found this helpful.
Belva est une marque qui se rapproche de la marque stinger a premiere vue.bon produit.
93found this helpful.
Great box for the $.
Dropped a RF prime In and sounds great. Well built. Great value.
87found this helpful.
Box is well built, its hard to mess up building a small sealed box.. The only problem was sub opening wasn't large enough for my sub, 5 minutes with a jigsaw and vacumn took care of that though..
83found this helpful.
Decent Small Box
For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.
84found this helpful.
Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.
78found this helpful.
I totally recommend this product, excellent value! super fast shipping
90found this helpful.
Quality at a great price
I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.
86found this helpful.
Sturdy, fits like a glove not too big, not too small either. Can't make it for the amount they sell it.
84found this helpful.
This product is cheap, but is worth much more than the purchase price! It's built just as if I purchased a sub box worth 3 times as much! It was really easy to screw in the screws for my Alpine sub.
77found this helpful.
This product is temporarily out of stock. May we recommend...
NVX SMW10D4 with Sealed Truck Enclosure
• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Includes Sealed Enclosure
• Single Square 12" Subwoofer Enclosure
• Forced-Air Cooling
• Enclosure Dimensions: 11 1/16" TD x BD x 12 5/8" W x 4 1/8" H
Infinity Reference 1000S with Sealed Truck Enclosure
• Peak Power: 800 watts
• RMS Power: 200 watts
• Polypropylene Cone
• Rubber Surround
• Impedance: Single 2 or 4 ohms
• Includes Sealed Truck Enclosure
• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H
• 10" Amplified Loaded Subwoofer System
• Compatible with select 2007-2016 vehicles from GMC, Chevrolet Vehicles
• 250 Watt RMS
• Built-In Class D Amplifier
Save up to 10 different vehicles in your garage