Remote Turn-on Module
Product highlights
• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead
Internal Product ID:
18693
| 5 star |
|
73% |
| 4 star |
|
20% |
| 3 star |
|
7% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
gets it
It does what it says. I have been running a 12 inch fan and two remote leads for 6 months. No problems hooking up.
54
found this helpful.Little Black Box
This things puts out great power, I'd recommend it even if you were only running one amp. It made everything sound cleaner and more alive. It's super easy to install and has simple instructions. The hardest part was pulling my stereo out, then it took about 2 minutes to connect and tuck everything away. I recommend you make sure you did it right and it works before you completely re-install your head unit.
50
found this helpful.it works
If you plan on put more than just a amp in your car I would use this its very easy to install and gets the job done.
49
found this helpful.good product
Bought this product to stop turn-on/off thump from my amp. It didn't completely fix the problem but it did help drastically. Its either this or a new amp but i like my mono block so im sticking to this.
easy to install, small and versatile. would definately recommend.
47
found this helpful.Excellent product - highly recommended
This unit is compact and easy to install. I use it to turn on my Rockford-Fosgate 3-Sixty, 4 channel Kicker amp and mono sub amp. It works perfectly - soft turn on and no hum.
47
found this helpful.Great value
I got this to stop the pop on and off noise from my eq and it did the job. This brand makes good stuff that works. I told all my friends about this item. This item is great if you are running more then 2 amps or have a pop noise when turn on or off
49
found this helpful.Works well
I got this to turn on amps, fans, RF 3Sixty.3, etc. ended up just using it to turn on my cooling fans and used another one to turn on my 360.3 and 1 amp.
46
found this helpful.PAC-TR-4
I bought this item for my Pioneer Z130 BT because the unit does not come with wireless remote capabilities and PAC-TR-4 solved that problem, installation was easy and in a couple of minutes it was installed and working as it should, great product.
48
found this helpful.Does what is says...
I bought this because I read alot of instances where the remote turn-on circuit on head units get fried or are overworked when more than a single amp is being used. It puts out over 2 amps, which is way more than the headunit. Seems to be working well, no issues detected. I am running a PA1600 4 ch and a PA4000 mono amp, along with a 20 farad Boss Cap, so 3 remote turnons so far.
46
found this helpful.Works Great
Added subs and an amp to my 2011 mustang with the shaker 500 system. This unit let me use the factory amp 5v turn-on and gives my sub amp the 12v turn-on it needs. Been in for 6 months with no problems whatsoever.
42
found this helpful.Best selling similar products
•Universal bypass module for aftermarket stereos
• Emulates a parking brake signal
•ntended for use in RVs, off-road vehicles and exhibition vehicles: Other applications are illegal
$10.99
• Provides 12-volts DC output when voltage is at or above 13.5-volts DC
• Designed for vehicles that do not provide accessory (switched) power
• 10-amp fuse included for safety
• Provides accessory power (13.5-volts 10-amps)
• Universal Compatibility
$25.99
• 8 outputs available to control 8 relay-connected 12V accessories
• Acceptable Configurations: Pulsed, Latched or Momentary Outputs
• Customizable graphical icons assigned to each accessory for quick identification on the screen
$199.95
• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead
$9.99
