Interface that Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System
• Allows Replacement/Addition Of Amp
• For Select Mazda Vehicles Without Bose System
• Interface Is Transformer Isolated
• Maintains Phase
• Linear From 20-20,000 Hz
• Provides 2:1 Gain
This AOEM Kit Includes the following:
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
18698
Excellent plug and play to add a sub to my mazdaspeed 3!!
I didn't want to chop up wires and i wanted to have full steering wheels controls for my OEM system. I used this adapter to wire in an amp and sub into a BOSE OEM system with no problems at all. Truly plug and play!!!
29
found this helpful.PAC AOEM MAZ2
Great product and easy to install. Works with my 2010 Mazda 3 GS.
27
found this helpful.Works perfectly.
Harness works perfectly. Was a real pain to stuff behind my stock bose HU in my MS3. Seemed like a quality product now I am enjoying the sound.
27
found this helpful.nice piece
Works for my Mazda 3s 2011. Only hard part was taking the original connections out from the back of the radio...what a pain!!!
25
found this helpful.Worked Perfectly
Highly recommend, worked flawlessly with my stock Mazda radio.
25
found this helpful.Excellent Product
This product enables a second amp to run off of the head stereo unit, installation was a snap, perfect for leased cars, anyone can do it, this was my first sub hookup in a car and it was a breeze, if you're not comfortable soldering the connections to your stereo, i would fork over the $100 for this unit...but if you are decent with electronics, and do not lease your car, save your money and look up how to do this hack yourself,,,anyways I've had it for 6 months and not a single malfunction/problem, just a little pricey for what it does, in my opinion.
25
found this helpful.Works nice, good sound, convenient install
I purchased this because I did not want to cut into the stock harness and those harnesses I saw were incomplete, they only had speaker wires, this one attaches to the stock harness seamlessly and allows you to add an amplifier.
The packaging is confusing, because the manufacturers website says it is for non bose, but the package says for bose. I thnk it will work with both since I got a chance to look at the harness closely.
the PAC high level converter works very well, there is no noise and the sound is quite good, when play through my installed system it is hard to tell that the sound is coming from stock speaker outputs and not rca's.
23
found this helpful.Amazing
Works perfectly, easy to install and use. This does work in a BOSE sound system!
24
found this helpful.Works in 2012 Mazda 3 Skyactive
This was no doubt the easiest way to get signal to my amp without cutting any factory wires. Works great and hides behind my radio. I have installed this in my 2012 Mazda 3 Skyactive Hatchback and would recommend anyone looking to go ahead and buy it. It's great. I ordered on Thursday and it was in my mailbox on Monday.
25
found this helpful.truly plug and play
Despite the advertising, this worked perfectly in my Mazda 3 2010 non-bose factory head unit. No connection issues at all, just unplug the connector on the rear right of the head unit and plug this device in. You do not need to fully remove the HU. I ran my RCA cables and remote turn on wire up through the center console and everything fit nicely in a slot behind where the rear of the HU connects to the dash.
24
found this helpful.This product is temporarily out of stock. May we recommend...
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
(1)
$49.99
Axxess AXDI-TY1 Wiring Interface
• Provides 12-Volt accessory power (RAP)
• Designed for amplified audio systems
• Micro-B USB Updatable
• Pre-Wired for ASWC-1 (sold separately)
$64.99
Axxess AXDSPX-FD3 Digital signal processor and T-harness
• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters
$329.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
(1)
$49.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
Save up to 10 different vehicles in your garage