Amplifier Integration Interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury with Amplified THX and Sony Sound Systems
Product highlights
• Amplifier integration interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury
• Compatible for vehicles without amplified THX and Sony systems
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
Axxess AXDSPX-ETH1 Digital signal processor and T-harness
• Plug and Play T-harness for faster installation
• 31-Band graphic EQ
• Can be used with OE and aftermarket radios
• Settings adjusted via Bluetooth® in a smart device
• Designed for Ethernet amplifiers
• Independent high pass, low pass, and bandpass filters
(3)
$418.99
List price $629.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
(3)
$93.99
List price $104.99
• Amplifier integration interface for select 2013-2024 vehicles from Ram, Jeep, Dodge
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier
• Delivers switchable 4-volt or 5-volt RMS pre-amp output
(4)
$399.00
List price $499.00
PAC APH-CH01 AmpPro Speaker Connection Harness
• Speaker Connection Harness
• Compatible with select 2007-2024 vehicles from Ram, Dodge, Jeep Vehicles
• 18" Length
• Plug and Play Harness
(1)
$49.99
List price $61.00
• 55 watts per channel
• Features a T-harness that installs quickly
(1)
$59.99
List price $87.00
• Amplifier integration interface for select 2007-2020 vehicles from Dodge, Jeep, Chrysler
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
(8)
$53.99
List price $78.00
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
(9)
$53.99
List price $87.00
• Allows the installation of aftermarket amplifier
• Compatible with select 2018-2024 vehicles from Ford with factory B&O system
• Retains factory radio controls and features
• Use with AmpPRO PC App via Windows PC
$479.00
List price $549.00
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
(3)
$54.99
List price $104.99
Manufacturer:
Model Number:
AOEM-FRD24
Weight:
0.75lbs
Internal SKU:
aoemfrd24
Internal Product ID:
18704
| 5 star |
|
92% |
| 4 star |
|
8% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great Product
I have this unit in my 2011 Superduty. It works great with the Ford Sync system.
Plugs right in to the back of the radio then the OEM radio plug goes into the PAC unit.
The PAC unit has a remote turn on.
Its also made in the US, which is refreshing for a piece of electronics.
Simple install
62 found this helpful Helpful?
PAC AOEM FRD24
Very easy install with my Ford F150 factory radio. Plug and play!
57 found this helpful Helpful?
Very Good Product
I hooked this up to a 2011 F-350 power Stroke baby. Anyway it worked great and I am still able to use the steering wheel controls and the Blue tooth and all of the functions of the factory stereo. This module does have a out put control I suggest just leave it at the factory settings. I connected a 12 inch sub with a 800 watt Sony amp had to turn everything way down but I must admit it is a great improvement and I highly recommend this product if you want to keep your factory settings.
58 found this helpful Helpful?
Easy
Plugged in easy, works great on my 2010 F150.
56 found this helpful Helpful?
Worked GREAT
worked in my 2012 ford escape to stock headunit, made it easy to hook up amps to my new speakers
54 found this helpful Helpful?
2014 Mustang plug n play for some Boom!
I used this interface with my 07 Ford F-150 and it works great. I just purchased a 2014 Mustang 5.0 and the wire harness works great. I was able to add an amp for my subs using the factory radio. With two pair of RCA I am going to add more interior speakers with another amp. Win Win.
53 found this helpful Helpful?
Simple intall
I used this to hook up an amp and 2 subs in my truck. I've used these pac's before so I knew it would work. Easy install without cutting wires. Works perfectly and sounds great.
53 found this helpful Helpful?
Fit Perfectly
Works great and installed easily. Would recommend for Ford F150 truck set up for sure.
50 found this helpful Helpful?
PAC AOEM-FRD24 in 2012 F150
The product worked Great in my 2012 Ford F-150 FX4. I put in my amplifier, and two 10" subs using the PAC AOEM-FRD24. All of my factory controls work Great as well as my SYNC system. The best thing ever about it was I did not have to cut any wires.
49 found this helpful Helpful?
PAC aoem frd24
Very easy install did as described and it functioned perfectly.
50 found this helpful Helpful?
JL Audio Stealthbox® SB-GM-SLVCC3/10TW3/BK2
Custom fit subwoofer enclosure for select 2007-2013 vehicles from Chevrolet, GMC (Ebony)
(4)
$1999.99
List price $1999.99
M1 10" loaded subwoofer enclosure for select 2017-2021 vehicles from Can-Am
$689.99
List price $714.99
6 inputs / 6 outputs High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control
$62.99
List price $101.99
