See all parts that fit your 2020 Rio
3200W RMS Full-Bridge 1-Ohm Stable 4-Channel Amplifier + 1/0 Gauge Amp Kit
• 350 watts x 4 channel Watts RMS x 1 @ 4 ohm
• 400 watts x 4 channel Watts RMS x 1 @ 2 ohm
• 800 watts x 4 channel Watts RMS x 1 @ 1 ohm
• Total RMS Power: 3200 watts
• CEA-2006 Compliant
The NVX XAD42 is a fully bridged Class D amplifier. Consumers who seek high-power outputs in their amplifiers consider these fully bridged amplifiers to meet those needs. A full-bridge converter consists of two legs of the half-bridge converter and is preferred over the half-bridge in higher power ratings. With the same DC input voltage, the maximum output voltage of the full-bridge converter is twice that of the half-bridge converter. This Class D amp is able to boast a strong wattage output. Class D amplifiers operate as electronic switches rather than linear gain switches in other amplifiers. Furthermore, The Class D amplifier can be more efficient than its linear gain amplifier counterparts, with less power dissipated as heat in the active device. As a result, Class D amplifiers do not require large heat sinks, resulting in lighter-weight amplifiers.
The NVX XAD42 is equipped with a Metal-oxide-semiconductor field-effect transistor. The most common transistor in electronics offers a key advantage. It requires almost little to no input current to control the load current. In addition, MOSFET transistors can be scaled down to a much smaller size and produced at a higher yield making them the premier transistor of choice in almost all electronics, therefore, the XAD42 yields a high output in a more compact size. With such high power output, one would assume that a three-way protection circuitry (thermal, overload, and speaker short protection). Protect your amplifier and your speakers by offering a number of different protections including thermal, overload, and speaker short protection. These help ensure the longevity of the amplifier and your system as a whole.
The XAD42 is a fully bridged 1-ohm stable amplifier. This means that this amp will be capable of operating at a lower impedance or resistance. Since they encounter less resistance at 1-ohm these amps are able to output more power than a similar 2-ohm stable amplifier. The XAD42 also has the capability to be bridged down to 2-ohm’s. This allows the amplifier to take your sound to the next level by generating a 3200W RMS power output. Because XAD42’s are 1-Ohm Stable, they are a perfect piece to add to your sound system if you are looking to get the most out of your speakers or subwoofers.
NVX XAPK0
Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire for Amplifiers up to 4000 Watts
Quantity: 1
Best selling similar products
Manufacturer:
Model Number:
XAD42, XKIT44
Weight:
27.28lbs
Internal SKU:
xad42_xkit44
Internal Product ID:
194479
Awesome Wire
This wire kit is of the utmost quality. The wire is actually thicker than 0 gauge! I probably only needed 4 gauge wire for my setup, but this ensures maximum safety and power delivery without putting a strain on any of my components. Excellent item.
137 found this helpful
Great Wiring kit!!!
This kit has some of the best wire I have used. Its true 0 gauge and really flexible. The fuse block is really well made and easy to swap fuse. Over all I would recommends to other people.
134 found this helpful
good cable
The cable is thick and heavy! Decent product! What I actually bought was a "package" it came with a RCA cable as well. I was expecting a 300A fuse but got a 150A.
130 found this helpful
quality product
First thought upon opening this product was the quality the full spec wire is the only way to go really nice fuse block and the ends are already crimped on one end makes it easier to use i have used other products in the past that cost way more money and i dont think they are as nice as nvx its the only way i will go for now on !!!!!!!!!
128 found this helpful
there GREAAAT!!!!
this wire kit is great very easy to flex . thick and true to gauge wire kit. price is a lil bit higher then the stinger kit but love to product overall
122 found this helpful
No more dimming headlights
Saw EXO reviewing the kit on YouTube and gave them a try. Very good quality and kit came with everything needed
118 found this helpful
High Quality Kit
Top of the line amplifier wiring kit. No cutting corners on materials here. Heavy gauge, quality wire. I have it installed with the NVX JAD 1200.1 amplifier and it is the perfect set-up. The only complaint I have is that it doesn't come with RCAs. High quality, true 0 gauge wiring that keeps everything running efficiently and cool!
118 found this helpful
Super easy install
Great set! Had everything I need and even some extras!
116 found this helpful
Very Good Product
Ive used numerous high end kits in the past and this kit is just as good as any of them, if not better, at a fraction of the cost. The amount of wire is great especially considering what some companies call 0 gauge, this is true 0 gauge. Add to that the fact that its silver tinned and that makes it an incredible product. Its flexibility is also note worthy, especially as most other brands of 0 gauge is fairly stiff. This is a great product.
112 found this helpful
Amazing Amp kit
The wire in this kit is incredable. It is copper wire with a silver coating around it. It is the most flexible wire of this size that I have ever seen! I even love the 12 gauge wire that comes for the speakers. This is the best kit I have ever purchased hands down. The cons though are it doesnt come with RCA cables, This did not matter to me as I did not need any anyway.
110 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.