Garage
Shop

Alpine RS-SB12 + Alpine R-A75M + Amplifier Wiring Kit

1800W Peak (600W RMS) 12” Halo Series 2-Ohm Loaded Subwoofer Sealed Enclosure

Alpine
Shop all Alpine
highlight-star-icon

• 600 watts Single 12" Sealed Subwoofer Enclosure
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 16" TD x 24.5" W x 5.25" H

Learn more about the rssb12_ra75m_xkit42

We apologize

This item has been discontinued

Description


Alpine brand icon

Authorized dealer

Alpine RS-SB12

1800W Peak (600W RMS) 12” Halo Series 2-Ohm Loaded Subwoofer Sealed Enclosure
Quantity: 1

Product Details:

  • Sealed enclosure with 1 12" Halo R-Series Subwoofer
  • 3/4" medium-density fiberboard construction covered with Carpet
  • Power Handling:
    • RMS: 600 watts
  • Final Impedance: 2-ohm
  • Polypropylene cone
  • Rubber surround
  • Frequency Response: 26 - 200 Hz
  • Sensitivity: 84 dB
  • Dimensions: 17" L x 5.25" H x 26.5" W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Alpine R-A75M

R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS)
Quantity: 1

Product Details:

  • R-Series Class D Monoblock Subwoofer Amplifier
  • Power Output:
    • 500 watts RMS x 1 @ 4 ohms
    • 750 watts RMS x 1 @ 2 ohms
  • CTA-2006 compliant
  • Variable low-pass filter (50-400 Hz, 24 dB/octave)
  • Variable bass boost (0-12 dB at 50 Hz)
  • Variable subsonic filter (min-40 Hz, 24 dB/octave)
  • We recommend the Alpine RUX-KNOB.2 if you are looking for a remote bass knob for Alpine Amplifiers
  • Preamp and speaker-level inputs
  • Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW
  • Preamp outputs
  • Wiring and hardware not included with amplifier
  • 4-gauge power and ground leads recommended - get the NVX XAPK4 for this
  • Fuse rating: 40A x 2
  • Dimensions: 9" W x 2-1/16" H x 7-1/8" D
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

NVX XKIT42

Full Spec 4 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1500 Watts
Quantity: 1

Product Details:

  • 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
  • Designed for car audio systems up to 1500 watts RMS
  • Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
  • Tinned conductors for corrosion resistance
  • Pre-installed black nylon mesh covering protects power wire from being damaged
  • Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
  • Pre-terminated seamless power and ground ring terminals provide reliable performance
  • Full Spec cables meet or exceed the American Wire Gauge standards
  • Strand Count: 1862
  • CEA-2015 and BC5W2 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 20 ft. (6.1 meters) Frosted Blue 4 gauge power wire with seamless crimp ring terminal
  2. 3 ft. (.91 meters) Frosted Black 4 gauge ground wire with seamless crimp ring terminal
  3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
  4. 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
  5. One 16 ft. (5 meters) 2-channel dual twisted construction RCA interconnect Cable (NVX XIV25)
  6. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. Two 4 Gauge Nickel Plated spade terminals
  9. Four 18 Gauge Spade terminal
  10. Two 18 Gauge Red butt connectors
  11. Four 16 Gauge quick disconnect
  12. Five 16 Gauge Nickel Plated spade terminals
  13. Two Heat Shrink tube with NVX logo
  14. Ten 6" Black zip ties

Specifications & Details


Series
Series
Halo R-Series
Subwoofer Amplifier Power Specifications
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
750 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Maximum Input Gauge Size
4 AWG
THD at Rated RMS Power
>1%
Speaker Level Inputs
Optional (Requires Accessory Adapter)
Preamp Outputs
Mono output
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
50 - 400 Hz
Subsonic Filter
10 - 40 Hz
Bass Boost
0 - 12 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
Fuse Rating
40A x 2 
CEA-2031 Compliant
Yes
Subwoofer Specifications
Subwoofer Size
12"
Total RMS Power Handling
600 watts
Total Peak Power Handling
1800 watts
Woofer Surround
Rubber
Woofer Composition
Polypropylene
Sensitivity
84 dB
Frequency Response
26 - 200 Hz
Subwoofer Design
Round / Circle
Enclosure Specifications
Box Type
Sealed
Number of Subwoofers
1
Box Style/Shape
Square/Rectangle
Height
5.25"
Width
24.5"
Depth
16"
Wood Thickness
3/4"
Number of Terminals
1
Terminal Type
Binding posts
Box Exterior Color
Black
Box Finish
Carpet
Final Wired Impedance
2-ohm
Amplifier Wiring Kit
Is Amplifier Wiring Kit included?
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

RS-SB12, RA75M, XKIT42

Weight:

48.80lbs

Internal SKU:

rssb12_ra75m_xkit42

Internal Product ID:

199764

Customer Ratings & Reviews



5 star
85%
4 star
15%
3 star
0%
2 star
0%
1 star
0%



Durability
5
Value
4.9
Features
4.9
Design
5
Usability
4.9

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

Durable

The following review is for XKIT42, which is a part of the bundle you are viewing.

The wire is so thick for quality sound production and yet so flexible. I didn't do my own install but the installer guy asked me about the kit and seemed to like the ease it offered

By Joseph on September 18, 2013

150

found this helpful.

Real nice

The following review is for XKIT42, which is a part of the bundle you are viewing.

This is a really nice kit has everything you need

By Clint on July 17, 2014

142

found this helpful.

Quality

The following review is for XKIT42, which is a part of the bundle you are viewing.

Top quality kit. The power cable is very easy to bend, and the fuse block is well built. My only complaint is the oddball fuse

By Alex on January 13, 2014

142

found this helpful.

NVX XKIT42

The following review is for XKIT42, which is a part of the bundle you are viewing.

This is the perfect kit for anything around 1000 watts RMS. I have it hooked to a NVX JAD1200.1, and it is perfect. I literally have nothing bad to say about this kit. Every wire is true to gauge and it comes with plenty of wire, even 40ft of speaker wire! The RCA works great and the wires are strong and flexible. It'd be nice if it was a little cheaper, but it's definitely worth it. NVX makes some of the best, high quality wires and instillation equipment.

By Smuck on January 9, 2014

139

found this helpful.

great product!!!!

The following review is for XKIT42, which is a part of the bundle you are viewing.

this has to be the best connection kit I have ever used.. everything was flawlessly constructed and everything you need is in the kit, remember you get what you pay for... I am using this in a small suv that has no carpet but herculiner throughout and I need pure copper for corrosion resistance.. could be cheaper I guess..

By Dan on September 20, 2013

138

found this helpful.

Best wiring overall

The following review is for XKIT42, which is a part of the bundle you are viewing.

when i received this and opened it up i was amazed when i saw how a 4ga. wire could look so much like 0ga. and bend so easily. the speaker wire is so thick that you would not believe that it is speaker wire. the wires also make your music sound so much clearer than any other wiring can. all the components are the best in quality.

By Kevin S. on June 2, 2013

134

found this helpful.

Great service again

The following review is for XKIT42, which is a part of the bundle you are viewing.

Another great buy! Chris took care of me again! Every one looking for car audio and your not shopping here your getting robbed!!!! If you don't believe me check for yourself. Just the customer service makes it worth buying anything from here. And any questions you have they are quick to get back to you and help you out.

By craig on August 31, 2014

133

found this helpful.

Not your average amp kit.

The following review is for XKIT42, which is a part of the bundle you are viewing.

If you're picking up a bad*ss amp, why wouldn't you pick up a PROPER wiring kit ?!
I've previously used NVX Power/Ground wire for a BIG 3 Upgrade install, and was blown away by the Quality of the wire. High Strand, True To Spec, Super Flexible, Very Durable, and Conducts Very Well. Same can be said for the Speaker Wire and RCAs. I wish NVX made a kit with their higher end RCA cables, but the ones with this kit definitely get the job done. The fact that the Power/Ground come Crimped and Shrink Wrapped really save on install time, and the flex wrap on the Power Wire makes the install look Very professional. I ended up using the other goodies (ties and connectors) for various other things, but its pretty cool that it comes with the kit.

By REM on July 8, 2014

134

found this helpful.

Love this kit

The following review is for XKIT42, which is a part of the bundle you are viewing.

Great true 4 gauge wire kit. Both power/ground cables are flexible easy to work with, rca calbe is great. This kit comes with everything you need for an amp install. I will be using NVX amp kits for now on future installs.

By Ben on January 9, 2014

134

found this helpful.

Very good wires at a cheap price

The following review is for XKIT42, which is a part of the bundle you are viewing.

Wire if true to gauge, also 100 percent copper very cheap price for the better quality of wires you get plus the hyper flex material makes it very easy to run wires ,overall great wires for price

By jason on May 26, 2014

131

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBSTA

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(3)

$199.99

NVX QBUS10P

• Low Profile Ported Subwoofer System
• 200 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(24)

$149.99

Belva BPKG212v2 Dual 12" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(78)

$239.99

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(7)

$129.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$299.95

Related Searches


RS-SB12, RA75M, XKIT42 small

Item added to your cart.

Price: $1169.89

Essential add-ons
Belva BAK42

Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

$59.99

$34.99

Add to cart
Alpine RUX-KNOB.2

Plugs directly in for quick direct subwoofer control

$40.00

$29.95

Add to cart
NVX SDTK20

Trunk Kit - 20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
Dynamat Xtreme 20' Trunk Kit 19405

20 ft. Trunk Kit with (5) Dynamat Extreme 18" x 32" Pieces

$187.44

$149.95

Add to cart
Boom Mat Damping Material (050210)

20.8 sq.ft Damping Material - (10 pk - 12-1/2" x 24" x 2mm )

$145.81

$119.99

Add to cart
Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon