Sign In
  1. Home
    2. /
  2. Car Audio & Electronics
    3. /
  3. Car Amplifiers
    4. /
  4. Car Amplifier Packages & Bundles
    5. /
  5. Precision Power PC1800.1D, BAK02

Precision Power PC1800.1D with Amplifier Wiring Kit

1800W RMS EXL PowerClass Vertical Class D Monoblock Amplifier with Bass Remote

56
Precision Power
Shop all Precision Power
highlight-star-icon

• 500 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

Learn more about the pc18001d_bak02

We apologize

This item has been discontinued

Show me more products from this category
Go to Category

Description

Precision Power

Authorized dealer

Precision Power (PPI) PC1800.1D

1800W RMS EXL PowerClass Vertical Class D Monoblock Amplifier with Bass Remote
Quantity: 1

Product Details:

  • Power Class Series Class D 1 ohms Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 500 watts x 1 channel
    • 2 ohms: 1000 watts x 1 channel
    • 1 ohm: 1800 watts x 1 channel
  • Total RMS power output: 1800 watts
  • N-Channel MOSFET transistors from Sanken® of Japan
  • Sequenced delays eliminate power-up/power-down pops
  • Output stage bias individually sequenced
  • Close tolerance signal path components <1% wima® of Germany
  • Full signal path low noise/distortion circuitry topology
  • Extra low current drive stage increases efficiency & sound clarity
  • Stout 2 oz. Copper traces
  • Differential rca inputs isolate 12v/audio to ground
  • Individually regulated preamp/crossover power supply ensures signal purity
  • LED Power/Protect Light
  • Dash-mount wired remote bass level control included
  • Soft start turn-on
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Frequency Response: 17 - 300 Hz
  • Total Harmonic Distortion (THD): 0.05%
  • Signal to Noise Ratio: 90 dB
  • Variable low-pass filter: 32 - 300 Hz
  • Subsonic filter: 17 - 50 Hz
  • Variable Bass Boost: 0 - 12 dB
  • 1/0 AWG gauge power and ground wiring is recommended for installation.
  • Dimensions: 3.25" W x 17.75" L x 8" H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Precision Power PC1800.1D Manual

Belva BAK02

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - RED
Quantity: 1

Product Details:

  • 1/0 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 2000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • ANL Fuse holder with a 150 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 1/0 gauge power wire
  2. 3 ft. (.91 meters) Black 1/0 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. One ANL Fuse Holder with a 150 amp ANL fuse
  6. One Black rubber firewall grommet
  7. Three 1/0 Gauge red chrome plated ring terminals
  8. One 1/0 Gauge chrome plated ring terminal
  9. One 18 Gauge red Spade terminal
  10. One 18 Gauge red butt connector
  11. Eight 6" Black zip ties

Specifications & Details

Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
1000 watts x 1 channel
RMS Power @ 1 ohm
1800 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1800 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
Frequency Response
17 - 300 Hz
THD at Rated RMS Power
0.05%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
32 - 300 Hz
Subsonic Filter
17 - 50 Hz
Signal-to-Noise Ratio
90 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
CEA-2031 Compliant
No
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
No
Hi-Res Certified
No
Low-Level Input Sensitivity
200mV - 8 volts
Amplifier Kit Specifications
Number of Amplifiers Supported
1
Power/Ground Wire Size
1/0 gauge
Power Wire Length
17 feet
Ground Wire Length
3 feet
Speaker Wire Included
No
Remote Wire Length
17 feet
Interconnect (RCA) Signal Cables Included
2 Channel
Fuse Holder
ANL
Fuse Size
150A
Distribution Block Included
No
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details

Manufacturer:

Precision Power

Model Number:

PC1800.1D, BAK02

Weight:

18.90lbs

Internal SKU:

pc18001d_bak02

Internal Product ID:

200829

Customer Ratings & Reviews

Precision Power PC1800.1D with Amplifier Wiring Kit
56
Rate or review product
5 star
66%
4 star
23%
3 star
4%
2 star
7%
1 star
0%
Durability
4.7
Value
4.7
Features
4.5
Design
4.7
Usability
4.6

Customer Photos & Videos

Customer Reviews

Sort by:
Loading...

Good

The following review is for BAK02, which is a part of the bundle you are viewing.

This wire is very flexible and fit nicely in my 2000 nissan maxima. ring terminals were a little fussy, but that was operator error. very nice 150 amp fuse. Lots of wire crammed into it. Very inexpensive for the quality. I would recommend this to anyone looking for an upgrade.

By Blane on February 24, 2014

96

found this helpful.
Helpful? Report abuse

Decent Amp Kit

The following review is for BAK02, which is a part of the bundle you are viewing.

I am a professional installer first of and my father is an electrician. Following the AWG- American Wire Gauge standards this is not 1/0 wire it's closer to 2AWG, please understand that true 1/0AWG copper wire will cost around $5-8 a foot.

That being said for the price it is an amazing kit but should be marketed as 2AWG.

When compare to Kicker and Memphis true to spec 1/0AWG wire there is a major difference in size and weigh over all. 5 feet of Memphis 1/0 Wire weigh the same as 17 feet of Belva 1/0AWG.

By josh on October 3, 2014

81

found this helpful.
Helpful? Report abuse

Great

The following review is for BAK02, which is a part of the bundle you are viewing.

It is what it says it is.. no problems with install.

By PJ on September 17, 2013

78

found this helpful.
Helpful? Report abuse

Great Wire

The following review is for BAK02, which is a part of the bundle you are viewing.

It's the size it says it is, and powers my 1400 watt system with no problems. For the price and ease of install, I couldn't be happier!

By Bay on May 18, 2014

77

found this helpful.
Helpful? Report abuse

a great kit for the price

The following review is for BAK02, which is a part of the bundle you are viewing.

these are great for the money and would definitely buy again

By Joseph on February 6, 2014

77

found this helpful.
Helpful? Report abuse

top quality

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit on a deal with a amplifier I purchased thought it looked good turned out to be one of the best amp kits I have ever owned would of paid full price for it

By Drew on March 28, 2014

74

found this helpful.
Helpful? Report abuse

Great deal

The following review is for BAK02, which is a part of the bundle you are viewing.

I got this kit because I got a deal on it with my amp...great starting kit...didn't have any problem with it when I installed it...The ground cable was to short for me but that is due to my custom box..All in all good 1/0 Guage kit

By Robert on August 8, 2014

73

found this helpful.
Helpful? Report abuse

Huge

The following review is for BAK02, which is a part of the bundle you are viewing.

I have never ran 0 gauge before and when I got it and took it out I was surprised but the big wire didn't really hurt the install it is still hidden under the carpet and it's thick and flexible so it was easy to run through the firewall. Now I'm gonna get the Belva big 3

By Brennen on June 9, 2014

72

found this helpful.
Helpful? Report abuse

True 0 AWG!

The following review is for BAK02, which is a part of the bundle you are viewing.

Pros:
This kit comes with everything you need for a 0 AWG amp install with RCA inputs.

Cons:
NONE

I would definitely recommend purchasing this kit if you need a quality 0 AWG kit at a fair price with super fast shipping!

By Michael on October 10, 2013

70

found this helpful.
Helpful? Report abuse

good product

The following review is for BAK02, which is a part of the bundle you are viewing.

Good product, they give you plenty of length. Only complaint is that the o connectors are really hard to clamp down and the rcas are kinda cheesey but work

By Zach on September 12, 2013

68

found this helpful.
Helpful? Report abuse
See all 56 reviews

Add-ons

Similar Products

Best selling similar products

small

Alpine MRV-M500 with Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 500W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Includes Amplifier Wiring Kit

(63)

$164.95

small

JL Audio JD1000/1 with Amplifier Wiring Kit

• NexD Switching Technology
• Differential-balanced Inputs
• 1000W Class D Mono-block
• Compact and Powerful
• Includes Amplifier Wiring Kit

(89)

$449.98

small

NVX VAD17001 with Amplifier Wiring Kit

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Includes Amplifier Wiring Kit

(54)

$249.99

small

Kicker 46CXA4001 with Amplifier Wiring Kit


• 150 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

(33)

$199.99

small

NVX XAD21 with Amplifier Wiring Kit

• 250 watts x 2 channel @ 4 ohms
• 550 watts x 2 channel @ 2 ohms
• 1000 watts x 2 channel @ 1 ohm
• Total RMS Power: 2000 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit

(88)

$257.61

Related Searches

› Precision Power › Precision Power PC1800.1D, BAK02 Reviews › Precision Power Car Amplifier Packages & Bundles › Car Amplifier Packages & Bundles under $300
PC1800.1D, BAK02 small

Item added to your cart.

Price: $282.48

Keep shopping Go to cart
Essential add-ons
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

$114.99

$99.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

2 | Make
3 | Model
Where to find vehicle info | Shop without vehicle

Select Additional Details for or Change Vehicle

Can't find your vehicle? Click here and we'll help.

Find products that fit

Find gear for your vehicle – fast.

2 | Make
3 | Model
Remove

Can't find your vehicle? Click here and we'll help.

Where to find vehicle info

< Go to Fitment

Didn't find your car?

Submit your details and we'll help!
Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
< Back
Track order
Call our experts
Instagram Youtube