200W 2-Channel Class D Amplifier with 250W RMS 15" Single 4-Ohm Subwoofer
• NexD Switching Technology
• Differential Balanced Input Section
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer
• Rockford 15" Single 4 ohm Subwoofer
• 500W Peak
• 250W RMS
• Kevlar Reinforced Paper Cone
• High Density NBR Half-Roll Surround
• 2" 4-Layer Voice Coil
This potent 2-Channel amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in an ultra-compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 200W of continuous power into a 4 ohm load (14.4V, 1% THD) Bridged. Targeted specifically for an audiophile-grade subwoofer or two satellite system, the XD200/2v2 includes a variable mode low-pass/high-pass filter with a continuously variable cutoff frequency selection from 50-500 Hz. The XD200/2v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you can control the volume of the XD200/2v2 from the front of the vehicle. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.
From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD amplifiers and channels feature a variable, ultra-high speed version of the NexD technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
Rockford Fosgate Punch P1S4-15
500W Max (250W RMS) 15" Punch P1 Series Single 4-Ohm Car Subwoofer
Quantity: 1
![]() |
Priced Individually
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Manufacturer:
Model Number:
XD200/2V2, P1S4-15
Weight:
23.70lbs
Internal SKU:
xd2002v2_p1s415
Internal Product ID:
200992
Great Product
These subs pound harder then any other sub I have owned. great product would buy two more if my car could fit them.
33
found this helpful.Gotta love them 15s
This is my first purchase of the 2011 line of Punch subwoofers and I must say I like the design and look of these better than the previous line of which I have two 12", although those are wonderful subs as well. I don't really have room for a 15 in any of my vehicles but was missing that deep, "feel it not hear it" bass that only a 15 can provide so I got one of these to add to my garage stereo and I am very happy with this sub. I am pushing the P1S4-15 off of a Fosgate Power 500bd @ a 4 ohm load so the sub is getting at least 250 watts rms and it seems to be a perfect match. I doubt my neighbors are gonna like my new toy very much.
28
found this helpful.Nice 4 Da Price
Man! These subs really bang. They slam and can hang with the big boys. I put 2 of these on hifonics brx1000 @2ohms and they got down. I couldnt believe how loud and deep they were. Well worth it!
27
found this helpful.boom boom boom
Good subwoofers. No problems so far. They pound hard with the right wattage.
26
found this helpful.Cant beat it for the money
I was skeptical that I would be satisfied with an entry level sub after being in the game as long as I have but I was wrong. I installed it in my wife's SUV on 250 watts in an Atrend sealed 2.0 ft sealed box. Sub moves lots of air and produces alot of deep bass you can feel. This is a good set up for someone just getting in the game or thats tight on cash for the sub and box shipped cant be beat.
25
found this helpful.fun fun
Great subs for price. Dont distort at all with my set up. Even ran them at 2 ohms and theyre holding up nicely. They be thumpin holmes
23
found this helpful.Great Sub For the Price
I have 2 of these on a prime 500-1 in a prefab ported box. They did a 142 on the meter. Great subs for the money and I highly recommend. Sonic has great service to I got these in 2 days with just standard shipping.
22
found this helpful.Rockford Fosgate Punch P1S4-15
Very pleased with these subs. Have 2 running off of a MRV-M500. 500 rms Alpine amplifier. Large sealed box. Subs never bottom out and are pretty tight for entry level subs. I was sceptical at first but I am very satisfied with this purchase.
10
found this helpful.Awesome sub
I have 2 of these on a prime 500.1 they can bang out a 143Db easy. Mine are in a 4cuft box @ 35hz
9
found this helpful.Always Great Products!:) Fosgate thanks
I had a 12' ported box many years ago and this fosgate 15" with a 2 channel 1000 watt class ab amp and WOW this thing has some bass!!!
I have found its better to have more power than what the speakers need so that the speaker gets a clean undistorted signal with some MAJOR bass! For eighty-nine dollars on sale that's so Awesome, I bought a second one. I rated the 5 on durability, time will tell but so far Great, as with anything it can be treated right and last or recked in short order.
I used the sealed box and with the extra juice it still gives a clean hard hitting bass!:)
Thanks team fosgate, and sonic electrinix!
jw
9
found this helpful.Best selling similar products
Belva BPKG212v2 Complete Amplified Bass Package
• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit
(75)
$249.99
MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier
• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting
(150)
$279.95
Belva BPKG110v2 Complete Amplified Bass Package
• Works with both Factory and Aftermarket Audio Systems
• Single 10" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit
(24)
$129.99
• XED Series Bass Package
• Two 12" Subwoofers with 2" Voice Coill
• 400W RMS Monoblock Amplifier
• Carpeted and Embroidered Enclosure
(1)
$329.99
• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H
• RMS Power: 1200 Watts Each
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(141)
$621.97
Save up to 10 different vehicles in your garage