1200W RMS High Fidelity Q Series Monoblock Car Amplifier
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
• RMS: 400W x 1 @ 4 ohms, 800W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total RMS Power: 1200W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• Preamp RCA Outputs
• Dimensions: 20"L x 8-1/2"W x 2-1/4"H
The Q1200.1 Q series amplifier from Image Dynamics is the perfect amplifier if you are looking to power your subwoofers to the correct recommended power. This amp is rated at 400W RMS x 1 Chan. @ 4ohms, 800W RMS x 1 Chan. @ 2ohms and 1200W RMS x 1 Chan. @ 1ohm. The amplifier utilizes the best electronics to produce the up-most quality and reliability.
The amplifier is also equipped with a variable bass boost, variable low-pass pass filter, and subsonic filter for finer tuning of your car audio system's frequencies. A 5-way system protection circuitry and soft start feature allow for complete protection of the amplifier but also of your devices. With its high end components and impressive features this amplifier is sure to produce a premium detailed musical performance.
Image Dynamics Q1200.1 monoblock amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings.
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
Internal Product ID:
22196
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Image Dynamics gets it done.
I run a IDMAX12 off this baby and the bass makes people think I have two 12's or a bigger setup because it's all clean power coming thru the amp and the excursion on the subs is very good too. Image Dynamics doesn't get enough credit for the quality of product they put out, buy this amp you won't be let down
21
found this helpful.
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor
16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors
Comes with everything you need to upgrade your power and ground wire.
Features everything needed to upgrade factory power and ground wire.
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
Best selling similar products
• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier
$179.99
• 670 watts x 1 channel @ 4 ohms
• 1100 watts x 1 channel @ 2 ohms
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohms Stable Monoblock Amplifier
$179.99
• 500 watts x 1 channel @ 4 ohms
• 850 watts x 1 channel @ 2 ohms
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohms Stable Monoblock Amplifier
$149.99
