Diamond Audio BR21STAGE7D

Product Details:

• System includes a pair of 6.5" coaxial speakers, two pairs of 4" coaxial speakers, one loaded single 12" enclosure, amplifier wiring kits, and speaker adapters
• Designed and engineered to match and compliment the factory fit and finish of your vehicle
• Enclosures for speakers and subwoofer integrate with no loss of passenger space
• Plug and Play design for easy installation
• No drilling or cutting required
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Diamond Audio DMD652 6.5" 2 Way Coaxial Speakers:

• Power Handling:
• Peak: 200 watts per pair / 100 watts each
• RMS: 100 watts per pair / 50 watts each
• Reinforced Polypropylene cone material
• Nitrile Butadiene Rubber (NBR) speaker surround
• 1" Silk Dome tweeters with ferro fluid cooling
• Chemically treated voice coils for added cooling
• Cross-flow design basket frames for thermal heat dissipation
• FEA optimized high-power ferrite motor
• Klippel DA-optimized motor and suspension symmetry
• High-strength ABS injection molded frame with integral terminals
• Top-mount Depth: 2.26"
• Cutout Dimensions: 5.53"
• Impedance: 4-ohm
• Frequency Response: 69 - 20000 Hz
• Sensitivity: 87 dB
• MFR #: DMD652

Diamond Audio DMD42 4" 2 Way Coaxial 4-ohm Speakers:

• Power Handling:
• Peak: 120 watts per pair / 60 watts each
• RMS: 60 watts per pair / 30 watts each
• Reinforced Polypropylene cone material
• 3/4" Silk Dome tweeters
• Composite ABS frame design
• Top-mount Depth: 1.82"
• Cutout Dimensions: 3.88"
• Impedance: 4 ohm
• Frequency Response: 83 - 20000 Hz
• Sensitivity: 84 dB
• MFR #: DMD42

Diamond Audio DESMB12 Loaded Single 12” Vented Enclosure:

• Ported enclosure with 1 12" DES Series Subwoofer
• Houses two Diamond Audio DES124 subwoofers
• Medium-density fiberboard construction covered with Carpet
• Power Handling:
• Peak: 1000 watts
• RMS: 500 watts
• Final Impedance: 2-ohms
• Fiber Paper cone material
• Rubber surround material
• Microboxes designed for optimal performance in small footprint
• Constructed with high-strength MDF with extensive bracing
• Slot vented for increased output and added enclosure rigidity
• High-grade rolled edge 6 leg black powder coat stamped frame
• Oversized chrome push subwoofer terminals
• Dual mirror image spider with woven tinsel leads
• Black PVC wrap around mounting gasket
• Klippel optimized motor and suspension symmetry
• Capable of withstanding long, extended listening sessions
• Sensitivity: 82.8 dB
• Subwoofer mesh grille: Diamond Audio DES12G (sold separately)
• Dimensions: 20.9” L x 12.9” H x 7.8” W
• MFR #: DESMB12

Diamond Audio HXM1100.6D Class D 6-Channel Amplifier:

• RMS Power Rating:
• 4 ohm: 90 watts x 4 channel + 250 watts x 2 channel
• 2 ohm: 150 watts x 4 channel + 150 watts x 2 channel
• Bridged: 300 watts x 2 channel + 500 watts x 1 channel @ 4 ohm
• Total power output: 1100 watts
• LED power and protect light
• Wired bass remote included
• Speaker-level (high-level) inputs
• Signal sensing remote turn-on with switch
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Anodized extruded Aluminum heat sink for superior thermal performance
• Full range class D IR chipset with DirectFET MOSFET output stage
• Illuminated logo and fully concealed mounting
• Output clip indicators for precise set-up
• Fine-tuned fully variable crossovers and phase control
• Top mounted controls for convenient amplifier adjustment
• Ideal for boats, UTVs, motorcycles, and other powersports application
• Input sensitivity:
• Low level: 0.2 – 10 volts
• High level: 0 – 25 volts
• Frequency Response: 10 – 35000 Hz
• Total Harmonic Distortion (THD): 0.03%
• Signal to Noise Ratio: 96.7%
• Variable high-pass filter: 40 – 400 Hz
• Variable low-pass filter: 30 – 300 Hz
• 4 gauge amplifier wiring kit is recommended for installation
• Dimensions: 12.5” L x 5.27” W x 1.75” H
• MFR #: HXM1100.6D

Diamond Audio HXM800.1D Class D Monoblock Amplifier:

• RMS Power Rating:
• 4 ohm: 350 watts x 1 channel
• 2 ohm: 550 watts x 1 channel
• 1 ohm: 800 watts x 1 channel
• Total power output: 800 watts
• LED power and protect light
• Wired bass remote included
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
• Signal sensing remote turn-on with switch
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Anodized extruded Aluminum heat sink for superior thermal performance
• Full range class D IR chipset with DirectFET MOSFET output stage
• Illuminated logo and fully concealed mounting
• Output clip indicators for precise set-up
• Fine-tuned fully variable crossovers and phase control
• Top mounted controls for convenient amplifier adjustment
• Ideal for boats, UTVs, motorcycles, and other powersports application
• Input sensitivity:
• Low level: 0.2 – 10 volts
• High level: 0 – 25 volts
• Frequency Response: 10 – 350 Hz
• Total Harmonic Distortion (THD): 0.05%
• Signal to Noise Ratio: 98.9 dB
• Variable low-pass filter: 30 – 300 Hz
• Subsonic filter: 10 – 55 Hz
• Variable Bass Boost: 0 – 12 dB
• 4 gauge amplifier wiring kit is recommended for installation
• Dimensions: 8.56” L x 5.27” W x 1.75” H
• MFR #: HXM800.1D