200W Peak (60W RMS) 4x6" 2-way 3-ohm Coaxial Car Speakers
Product highlights
• 100 watts Peak Each, 30 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Carbon-Polypropylene Hybrid cone material with diamond array pattern
• Impedance: 3 ohms
• Sensitivity: 86 dB
This offer cannot be combined with any other coupons or offers.
Kenwood eXcelon KFC-X463C
25% off
$74 00
$9 99
Priced separately $83 99
Promo Savings of $2 50
Total price:
$81 49
Kenwood eXcelon items are known for their quality construction and great sound. These Kenwood eXcelon KFC-X463C speakers are no different and continue that faithful legacy. Using the diamond array pattern on the carbon-polypropylene woofer diaphragm, the speakers gains more cone strength and improved acoustic response. Butyl rubber was chosen for the surround because of its smooth, linear cone support, as well as its durable composition. PEI Dome tweeters accompany the larger loudspeaker and result in crisp, clear highs that are not ear piercing. Each of these eXcelon speakers are carefully designed and engineered to produce the highest quality of sound so you can enjoy your music as it is meant to be heard.
Priced Per Pair
|
(newest, current model)
|
|
(previous model, replaced by Kenwood eXcelon KFC-X463C)
|
|
(previous model, replaced by Kenwood eXcelon KFC-X462C)
|
Internal Product ID:
22943
| 5 star |
|
50% |
| 4 star |
|
25% |
| 3 star |
|
0% |
| 2 star |
|
25% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great price for a great product
This is my first experience with Kenwood and I couldn't be more satisfied. The range is awesome, much better than my stock, and the instructions made it easy to install. Minor altercations were needed though. Other than that, very satisfied. Sonic had a helluva deal on them as well. I would recommend!
49
found this helpful.Speakers I recieved.
The product was easy to install, the sound was so much better then the factory ones. The price was reasonable.
46
found this helpful.Crispy
Yes these speakers are EXTREMELY bright, but that's what makes them awesome. Anything from the Excelon series speakers are extremely bright. That's just the way they're designed. Their brightness compares to Klipsch but not as "bitey" but more bell-like (As they ARE soft-dome, think Pioneer TS-15 tweets). I mean look at the frequency response and sensitivity of these. GREAT speaker, especially paired with SPL systems where bass is in the 130-140 dbs. (Even off your head-unit)
46
found this helpful.Clear, ear bleedingly awful sounds
These speakers sounded really awesome, but I don't recommend them to anyone unless you have hearing damage and cant hear high frequency's. At a volume level equal to a normal speaking voice the high/mid sounds of these speakers made both me, and my wife's inner ears hurt. They even gave her headaches, again, at low volume levels. Turning the mids and highs all the way down on the deck did not correct the problem either. Blaring the stereo with these was out of the question. I've never been into loud sound systems and I was just trying to get a really clear, crisp system going. I put the stock speakers back in, just so I could blare music again. I rate them as a 2 because they did at least sound awesome.
45
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
• 150 watts Peak Each, 50 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$55.96
• 120 watts Peak Each, 40 watts RMS Each
• Edge-driven Silk Dome tweeters
• UV-resistant Polypropylene cone material
• Impedance: 3 ohms
• Sensitivity: 92 dB
$69.99
• 70 watts Peak Each, 35 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Injection-molded Mineral-filled Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$99.99
• 60 watts Peak Each, 20 watts RMS Each
• 1" PEI (Polyetherimide) Balanced Dome tweeters
• Injection Molded Polypropylene - IMPP cone material
• Impedance: 4 ohms
• Sensitivity: 90 dB
$59.99
• 90 watts Peak Each, 45 watts RMS Each
• 1" Aluminum Dome tweeters with polyurethane suspension
• Carbon Fiber & Polypropylene-injected cone material
• Impedance: 4 ohms
• Sensitivity: 85.5 dB
$129.99
• 275 watts Peak Each, 40 watts RMS Each
• 1" PEI black polypropylene balanced dome tweeters
• Graphite-injected reinforced spun cone material
• Impedance: 4 ohms
• Sensitivity: 86 dB
$49.99
• 120 watts Peak Each, 30 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
$53.96
Infinity Kappa 463XF (INFSPKKA463XFAM)
• 180 watts Peak Each, 60 watts RMS Each
• 1" Silk Dome tweeters with output level control
• Glass Fiber cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 93 dB
$129.95
Infinity REF467F (INFSPKRF467FUS)
• 135 watts Peak Each, 45 watts RMS Each
• 1/2" Textile Balanced Dome tweeters with output level control
• Polypropylene cone material with Plus One woofer cone architecture
• Impedance: 3 ohms
• Sensitivity: 92 dB
$79.95
