8 oz. Insta-Cure+ Gap Filling Medium Cyanoacrylate (CA) Glue
Product highlights
• Cyanoacrylate (CA) Gap Filling Medium Glue
• Viscosity: Medium
• Curing Time: 5-15 seconds
• Compatibility: Wood, Plastic, and Metal
INSTA-CURE+ is a higher viscosity cyanoacrylate (CA) for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Best selling similar products
Second Skin Audio TAPE-2-150FT-FOIL
• High Temperature Foil Insulation Tape (Large Roll)
• Rated for use in high temperature environments
• Features 2" x 150 ft. dimension
• Must-use to create a tight seal
$19.99
List price $19.99
• Super Strong Contact Spray Adhesive (High Temperature)
• Works with all Second Skin Audio automotive materials
• Adheres to glass, cardboard, foam, paper, wood, rubber, metal, plastic, and cloth
• Rated for use in high temperature environments
• Fast dry time and water resistant
$17.99
List price $17.99
• Forces the Immediate Cure of all Cyanoacrylates
• Safe on Plastics
• Will not Craze Most Plastics
• Expands Gap Filling Ability
• Permits Structural Fillet Forming
(2)
$22.99
List price $25.99
• Accessory Kit to Reapply the FDA9 and FDA10 Series Antenna
$24.99
List price $37.48
Second Skin Audio TAPE-1-20FT-BLCK-BUTYL
• 20 Ft. Damplifier Butyl Sealant Tape
• Extruded, butyl tubber tape on rolled release paper
• Maintains moisture and air barrier
• Excellent adhesion to metal, wood, glass, and masonry
• AAMA certified component for window glazing
$385.00
List price $385.00
• Reapply the FDA4 and FDA8 series antenna
• Adhesive replacement kit
• Specifically for the FDA4 and FDA8 series antennas
$12.99
List price $19.48
Manufacturer:
Model Number:
INSTGL8
Weight:
0.65lbs
Internal SKU:
instgl8
Internal Product ID:
33043
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Works GREAT!
This product works great along side Metra INSTA-SET!
Dry's almost instantly w/that Insta-Set.
Only thing I hated about ordering this was that I didn't get a easy pour end tip. I guess this is a refill for the smaller can? IDK but it makes it SUPER difficult to use this way. Bummer but at least it works.
Using it on plastic to build and fabricate my tablet into my bezel.
39 found this helpful Helpful?
Great stuff
Used with the Instant Tac setter, this stuff is unreal. I'm using it on everything to set pieces in place, seal edges, and a lot more. Tons of uses and well worth the money.
38 found this helpful Helpful?
Insta-cure 8 onz
This glue is the best in the game fast dry and hard bon wood plastic you name it and it stick
37 found this helpful Helpful?
fab tools
Recommend!
A very useful product for fabricating a slew of stuff. Used it for making custom door panel pods & it sets up nicely.
28 found this helpful Helpful?
1400W Peak (400W RMS) Class D Vertigo Series 2-Channel Car Amplifier
$63.99
List price $154.00
SMD Temperature Meter (°C / °F) with Fan Controller for Car Amplifiers
(1)
$104.99
List price $134.99
Install New Speakers in select 1998-2019 vehicles from Ford, Mazda, Lincoln
(101)
$9.99
List price $14.99
Install New Speakers in select 1982-2025 vehicles from Honda, Acura, Isuzu
(85)
$9.99
List price $14.99
1200W RMS Class AB SMD Series 4 Channel Car Amplifier with Bass Remote
(1)
$574.95
List price $574.95
Wet Sounds REVO 8 FA SW-W GRILLE V3
8" Marine Subwoofer Grille for REVO 8 FA (Free-Air) Marine Subwoofers (White)
$49.99
List price $57.99
Empty 6.5" Direct Replacement Rear Speaker Pods for 2021-2025 Ford Bronco, Bronco Sport
$229.99
List price $229.99
