Garage
Shop

See all parts that fit your 2020 Sequoia

Polk Audio PA D1000.1 - Open Box, Good Condition (Used)

1200W RMS PA D Series Class-D Monoblock Car Amplifier Open Box Complete (Good, Used)

Polk Audio
Shop all Polk Audio
highlight-star-icon

• Item Condition - Good, Used
• 500 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• Wired remote bass level control included
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
• Dimensions: 6-3/4" W x 12-15/16" L x 1-13/16" H

Learn more about the LS-pad10001-OBC5

We apologize

This item has been discontinued

Description


Polk Audio brand icon

Authorized dealer

Item Condition - Open Box, Great:

This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.

Item Condition - Open Box, Good Condition:
A Good Open Box used product shows wear from consistent use, but it remains in good condition and works perfectly. It may be marked, have identifying markings on it, or show other signs of previous use or installation. Original packaging, paperwork or protective wrapping may be missing or not included in its entirety. Warranty details are included in the item description or comments.
Polk Audio PA D1000.1

Taking the Polk Audio PA D Series Into the Digital Era

The PA D1000.1 is Polk Audio's high-efficient digital monoblock amplifier. This amplifier is able to output power at 4 ohms, 2 ohms, and even 1 ohm. With this many different power ratings this monoblock amplifier is sure to fit various applications or installations that you are seeking to perform. Anything from "SQ" subwoofers at the 4 ohm rating to "SPL" heavy bass hitting subwoofers at the 1 ohm rating.

How does Polk Audio improve on their already popular and very well known PA D series amplifiers? With technology advances, Polk Audio has taken their PA D series into the digital amplification arena. This means a smaller foot print, a super-efficient design which allows for lower power consumption and does away with a larger power supply. This allows the new digital PA D series amplifiers to run far more efficiently with lower distortion and cutting or clipping. The new PA D Digital series amplifiers are available in a monoblock, 2-channel, 4-channel, and 5-channel configuration making them accessible for any application. With a height of under 2 inches for all four configurations, these amplifiers also offer a mounting convenience making them practically perfect for any vehicle. All four configurations feature a 4-way protection circuitry and stainless steel hardware that will not corrode, giving the amplifier longevity and a sleek and stylish look. Polk Audio is a known and trusted company and with these new PA D Digital series amplifiers not only are you getting the high Polk Audio quality, you are now getting the quality in a very high and efficient digital range.

Item Condition - Open Box, Good Condition (Used):

A Good Open Box used product shows wear from consistent use, but it remains in good condition and works perfectly. It may be marked, have identifying markings on it, or show other signs of previous use or installation. Original packaging or protective wrapping may be missing or not included in its entirety. Warranty details are included in the item description or comments.

Product Features:


 

 
  • PA D Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohm: 500 watts x 1 chan.
    • 2 ohm: 800 watts x 1 chan.
    • 1 ohm: 1200 watts x 1 chan.
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (blue) and protect (red) indicators
  • Soft start turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-way protection circuitry (thermal, overload, reverse polarity & speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 20 - 220 Hz
  • Damping Factor: >150
  • Total Harmonic Distortion (THD): <0.1%
  • Signal to Noise Ration: 105 dBA
  • Variable low-pass filter: 40 - 220 Hz, 12 dB/octave
  • Variable subsonic filter: 20 - 38 Hz , 12 dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
  • Fuse Rating: 40A x 3
  • Supply Voltage: 10V - 16V
  • 12 AWG Speaker Connections
  • 4 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 6-3/4"W x 12-15/16"L x 1-13/16"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Check out the Polk Audio PA D1000.1 Owner's Manual Important Note: Early versions of this amplifier included a "Terminal Adapter". As of 2015, Polk Audio has confirmed that they are no longer sending this adapter with their amplifier, albeit referenced in the user manual. We apologize for any inconvenience, and suggest browsing our selection of "Gauge Adapters" if you wish to use larger than recommended wiring. Thank you!

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
500 watts x 1 channel
RMS Power @ 2 ohms
800 watts x 1 channel
RMS Power @ 1 ohm
1200 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1200 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohm
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
<0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Subsonic
Low-Pass Crossover Frequency
40 - 220 Hz
Subsonic Filter
20 - 38 Hz
Signal-to-Noise Ratio
105 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fuse Rating
40A x 3 
Strappable
No
Sonic Certified Amplifier
Not Tested
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

PA D1000.1-2

Weight:

7.50lbs

Internal SKU:

LS-pad10001-OBC5

Internal Product ID:

135983

Customer Ratings & Reviews


Polk Audio PA D1000.1  - Open Box, Good Condition (Used) thumbnail image

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found


BAMF-4000/1D small

Power Acoustik BAMF-4000/1D (BAMF4000/1D) R/B

4000W Max Class D Monoblock BAMF Series Amplifier (Refurbished)

(4)

$129.99

List price $499.99

Related Searches


Save up to 10 different vehicles in your garage
Vehicle
Store
Delete

2020 Toyota Sequoia

2004 Volvo S60

2012 Honda Insight

2021 Subaru Outback

2009 Nissan Cube

2006 Honda Accord Hybrid

2017 Toyota Yaris iA

1987 Dodge Caravan

2000 Toyota Solara

2013 Chevrolet Volt

Vehicle
Store
Delete

2024 Can-Am Maverick X3 DS Turbo RR

2019 Can-Am Maverick X3 Max Turbo

Add vehicle Clear all vehicles
Where to find vehicle info
Are you sure you want to clear your garage?
This action cannot be undone. Confirm
This page was not designed for products.
If you continue, you will be redirected to a category customized for your vehicle. Continue
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.