400W Boston Acoustics Single 12" Complete Bass Package + Sound Dampening Kit

• 12" Single 4 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure
• Power Handling:
  • Peak: 400 watts
  • RMS: 200 watts
• Impedance: 4 Ohm (wired internally for final impedance)
• PowerVent™ tuning for optimum efficiency, impact and extension
• High quality MDF enclosure with glued and dado ends
• Heavy-duty nickel plated input terminals accept up to 10 AWG wire
• SureSet™ overdrive protection
• High temperature 2" 4-layer voice coil
• Radialvent® cooling, for increased power handling
• Black and Gray two-tone automotive grade carpet
• Q-Tune Setting: 32 Hz @ 1.0
• Frequency Response: 34 Hz
• Fuse Size: 4 Amp ATC
• 1-year Manufacturer's warranty

• Single 12" Loaded, Ported Enclosure
• Over-sized port
• Heavy duty nickle plated spring-loaded binding posts
• Black and Gray two-tone automotive grade carpet
• Dimensions: 12-1/8"TD x 15-1/8"BD x 27-1/4"W x 13-1/8"H

• 2-Channel Class AB GTA Series Amplifier
• RMS Power Rating:
  • 4 ohm: 60 watts x 2 chan.
  • 2 ohm: 100 watts x 2 chan.
  • Bridged, 4 ohm: 200 watts x 1 chan.
• MOSFET power supply
• Optional Bass Remote available Boston Acoustics GTA-RSL(remote level control sold separately)
• LED power and protect indicators
• SST (Symmetrical Signal Topology) system uses balanced asymmetrical inputs for noise cancellation
• Fully adjustable Q-Tune circuitry for simple bass output optimization
• Recessed control panel for clean installation
• IMS (Integral Mounting System) reduces the amplifier footprint
• All input/output connections are located on one side of the amplifier to ease installation and wire management
• Optimal angled speaker and power blocks for easy wire connections
• 2-Channel/Mono operation
• Speaker-level (high-level) inputs with signal sensing for automatic turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Fully adjustable and selectable lowpass/highpass crossovers
• Wrap-around heatsink design for extreme heat dissipation
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Variable High-Pass Filter (50-200 Hz, 12 dB/octave)
• Variable Low-Pass Filter (50-200 Hz, 12 dB/octave)
• THD (Total Harmonic Distortion): 1%
• Signal to Noise Ratio: 90 dB
• Frequency Response: 10-50,000 Hz
• Input Voltage: 14.4 volts
• Fuse Rating: 20 amp x 1
• CEA-2006 compliant amplifier
• Dimensions: 8-3/8"D x 9-3/8"W x 2-3/8"H
• 8-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• 1-year Manufacturer's warranty

Product Details:

• 8 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 600 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Red 8 gauge power wire
2. 3 ft. Black 8 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 60 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 8 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties

Product Details:

• 20 square feet sound deadening kit
• Core is based with 100% pure butyl rubber to withstand extreme heat
• No asphalt, tar, or cheap fillers - will not outgas, melt or fall off
• Waterproof barrier protects against moisture damage and mechanical oils
• Up to 30% thicker than cheap 50–80 mil alternatives
• Flexible aluminum backing contours tightly to complex door panels and vehicle curves with ease
• Structural damping kills unwanted sheet metal resonance caused by heavy mid bass
• Seals cavity to drastically increase speaker bass response and clarity
• Lowers cabin ambient noise so you hear your music instead of the highway
• Reflects radiant heat to help keep your vehicle interior cooler
• Simple three step peel and stick installation process makes upgrading your sound quick
• Combine this kit with NVX SDRLR1 Rubber Roller for easy installation
• Pack includes five 18" x 32" sheets
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Specifications:

• Install Location: Trunk
• Material Thickness: 0.091 (2.3 mm)
• Amount of Material: 20 square feet
• Material Use: Vibration Dampener
• Optimal Performance Temperature: 14°F to 140°F
• Rated Temperature Range: -75°F to 450°F
• Application Temperature: 60°F to 90°F
• Dimensions (each piece): 18"L x 32"W