4000 Watt Ear Drum Buster Bass Package

Product Features

• 12" Dual 4 ohm HCCA Series Competition Subwoofer
• Power Handling:
• Peak: 4000 watts
• RMS: 2000 watts
• Polypropylene cone woofer
• Rubber tri-radius symmetrical surround
• Dual flat conex spiders with loop stitched tinsel leads
• Enhanced voice coil cooling systems
• High temperature PAARC (Polyester Amide, Amide Resin Coated) Voice coil
• Dual 4 ohm copper wound voice coil on aluminum former
• Also found as: HCCA12.4, HCCA-12.4
• Sensitivity: 84 dB
• If you blow the subwoofer, there is a replacement cone kit that allows you to easily swap out the blown/burned voice coil and surround with a new one. The replacement kit allows you to keep the magnet and basket, therefore saving money as you do not need to buy a new sub.

General Features:

• SK Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 1500 watts x 1 chan.
• 2 ohm: 2780 watts x 1 chan.
• 1 ohm: 4900 watts x 1 chan.
• (16V) 1 ohm: 5860 watts x 1 chan.
• (18V) 1 ohm: 7420 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +9 dB bass boost at 45 Hz)
• Soft start turn-on
• Mono channel operation
• Preamp RCA outputs to daisy chain multiple amps
• 4-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy
• Operating Voltage:
• Voltage: 8.5V-18V
• Input sensitivity:
• Level: 200mV-6V
• Strappable design allows multiple SK amplifiers to combine power output towards one source
• Variable low-pass filter (35-250 Hz, 24 dB/octave)
• Variable subsonic filter (10-50 Hz)
• Dual 1/0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 9"W x 26"D x 2-1/2"H
• Authorized Internet Dealer
• 2 Year Manufacturer's Warranty

Battery Features

• 12V High Current Car Audio Power Cell
• Sealed absorbed glass mat (AGM) design
• Can be used as a replacement for your vehicles standard battery
• Can also be used as an additional battery to power your high-performance sound system
• Perfect for 600W car audio stereo systems
• Stores energy so you don't need a capacitor for your system
• Leak-Proof, non-hazardous design
• No external vents allow this battery to be mounted anywhere with no leaks
• Fits in almost any factory battery location
• Ultra low ESR
• More plates for stronger energy density
• Higher voltage under load
• 100% Sealed and maintenance free
• Tightly packed cells
• Resists extreme heat & vibrations for ultimate performance
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Battery Specifications

• Max burst amps: 850
• Cranking amps: 600
• Power: 600 watts
• Ah: 20
• Weight: 14 lbs
• Dimensions: 3”D x 6-1/2”W x 7”H

Amplifier Kit Features:

• 1/0 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems over 1000 watts RMS
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass and satin-chromed ANL/Mini-ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 4704
• BC-5W2 Compliant
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Kit includes:

1. 20 ft. (6.1 meters) Frosted Blue 1/0 gauge power wire with seamless crimp ring terminal
2. 3 ft. (.91 meters) Frosted Gray 1/0 gauge ground wire with seamless crimp ring terminal
3. 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
4. 20 ft. (12.2 meters) Frosted Gray/Blue 12 gauge speaker wire
5. One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 150 amp ANL fuse
6. One 1/2" black rubber firewall grommet
7. Two 1/0 gauge spade terminals
8. Two black 12 gauge nickel-plated spade lugs
9. Three blue 12 gauge nickel-plated spade lugs
10. One black 18 gauge spade terminal
11. Two 18 gauge red butt connector
12. Ten 6" black zip ties

General Features:

• Five 18" x 32" pieces of sound dampening material
• 20 square feet total
• Vehicle/car trunk sound damping kit
• Made from butyl-based material
• Retains flexibility in any climate
• Conforms to nearly any angle
• Bonds to almost any surface
• Eliminates road noise
• Reduce unwanted rattles
• Increases sound quality and output
• Extra thick construction
• Heat insulation metal shield
• Complete car kit also available
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• 4 Gauge Ring Terminals
• Nickel Plated for maximum power transfer
• Resealable high-end retail packaging
• Maximum Gauge Wire Input: 4
• Opening: 3/8"
• Color: 3 Red and 2 Black
• Number of terminals: 5
• Also available in 0/1, 5/16" Opening, 0/1, 3/8" Opening, 4 Gauge, 5/16" Opening, 8 Gauge, 3/8" Opening and 8 Gauge, 5/16" Opening
• Authorized Internet Dealer
• 30-Day Return Policy

Product Features:

• V-Series Twisted RCA
• 2-Channel Interconnect Cable
• Frost blue jacket
• Dual injection nickel plated split RCA ends
• Dual Twisted Pair Hyper-Flex technology for better signal transfer
• Length: 5m (16.40 ft)
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty