M2LV310D2 | 1800W Peak Car Subwoofer | DC Audio

DC Audio Level 3 10 m2.1 D2

1800W Peak 10" Level 3 Series m2.1 Version Dual 2-Ohm Car Subwoofer - M2LV310D2

1800W Peak 10" Level 3 Series m2.1 Version Dual 2-Ohm Car Subwoofer - M2LV310D2

• Peak Power: 1800W
• RMS Power: 900W
• Dual 2 ohm Voice Coil
• Extremely Rigid Non-Pressed Paper Cone Assembly
• Multilayered Polymer Wide Roll Foam Surround


List price $320.00
Save: $20.01


Out of Stock - Backorder with warranty
Thanks , You Pay:

Item Condition: Brand new

The item is brand new and not used.


Add a protection plan

3 years for

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

DC Audio (Soundlab)

Authorized dealer

General Features:

  • 10" Dual 2 ohm Level 3 Series m2.1 Version Car Subwoofer
  • Power Handling:
    • Peak: 1800 watts
    • RMS: 900 watts
  • Recommended power range: 400 - 900 watts RMS
  • Extremely rigid non-pressed paper cone assembly
  • Multilayered polymer wide roll foam surround
  • Polypropylene dust cover with embossed DC logo
  • Dual 8" OD flat linear roll spider
    • Extra heavy duty interwoven tinsel lead wire sewn to spider
  • 3" high temperature aluminum voice coil
  • Rubber mounting gasket
  • Chrome spring loaded push terminals
  • FEA analyzed and optimized motor assembly
    • Fully CNC machined
  • Top-mount depth: 6.25"
  • Mounting Hole Diameter: 9.35"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

m2 Level 3 10" T/S Parameters:

  • Electrical Q Value (Qes): 0.567
  • Mechanical Q Value (Qms): 7.66
  • Total Speaker Q Value (Qts): .528
  • Free Air Resonance (Fs): 38.5 Hz
  • Equivalent Compliance (Vas): 13.16 liters
  • One-Way, Linear Excursion (Xmax): 23 mm
  • Efficiency (Ref SPL @ 1W): 83.1 dB (86.6dB @ 2.83V)
  • Effective Piston Area (Sd): 324 cm²
  • DC Resistance (Re): 3.6 ohm
  • Nominal Impedance (Znom): Dual 2 ohm
  • Force Factor (Bl): 17.2
  • Mechanical Compliance (Cms): .09 mm/N
  • Mechanical Mass (Mms): 190 g
  • Voice Coil Inductance (Le): 3.5 mH
  • Suggested Sealed Enclosure: .65 ft³
  • Suggested Ported Enclose: 1.0 ft³

For more information on the Thiele and Small Parameters, visit our T/S Parameters Article

Subwoofer Specifications
Subwoofer Series
Level 3 (DC Audio)
Subwoofer Size
Peak Power Handling
1800 watts
RMS Power Handling
900 watts
Voice Coil(s)
Impedance (Per Voice Coil)
2 ohms
Voice Coil Diameter
83.1 dB
Xmax (millimeters)
23 mm
Subwoofer Design
Round / Circle
Main Cone Color
Woofer Composition
Non-Pressed Paper
Woofer Surround
Magnet Structure
Triple Stacked
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Optimum Sealed Box Volume
.65 cubic feet
Optimum Ported Box Volume
1.00 cubic feet
Top-Mount Depth
Cutout Diameter
Electromechanical Parameters
Free-Air Resonance (Fs)
38.5 Hz
Equivalent Compliance (Vas)
13.16 liters
Total Speaker Q Value (Qts)
Electrical Q Value (Qes)
Electrical Resistance of Voice Coil (Re)
3.6 ohms
Mechanical Q Value (Qms)
What is in the box?
WITB: Subwoofers
Other Accessory #1
Other Accessory #2
Other Accessory #3
Other Accessory #4
Other Accessory #5
Authorized Dealer
Authorized Dealer
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
DC Audio Level 3 10 m2.1 D2

DC Audio Level 3 10 m2.1 D2



Write a review

Overall rating distribution

5 star
4 star
3 star
2 star
1 star

By feature average rating



December 23, 2014

Very efficient sub

i am giving this sub 700 watts has very strong bass in a sealed enclosure


found this helpful.


September 18, 2017

little monsters!!!!

I would recommend this sub to anyone that wants to be heard but not want to rattle everything apart. DEEP BASS comes along with this sub i tell you! but what can I say DC Audio is badass!! THis is my 2nd DC Audio set up before i had the First Gen DC Audio 10 inch Level 3 M1 D2's and WOWWW!!! I was Loud before but my god these little Monsters are slaying Bass Lines left and right like you woudnt believe plays decaf 23hz like no problem I love it!!!!! Im loud i will say i love it and im not rattling my vehicle apart either but rattle my neighbors windows :}I Have 2 of these and when i first got them i ran Hifonics 1000.1D at 2 ohm 750 RMS so roughly (325 RMS) to each sub for break in and after about 3 weeks put them on 2200 watts so just a little over a 1000 watts each sub in 3.2 cubic foot box @36HZ with a 8inch octoport....


September 18, 2017

Holyshitaki mushrooms!!!!

Okay so I knew wanted DC audio and that I wanted to sound good and wanted to be heard but i did not want all my stuff rattling like tin cans and sounding like crap. So I did my research for a good 3 months and decided that 10s would be best, so I got 2 of these little monsters putting them on a hifonics 1000.1D at 2 ohm 750 so roughly 325 watts is going to each sub just to break them in until I put them on a hifonics brx2400 (2200) watt rms amp but that are in about roughly a 3.5 cubic foot box with a 8 inch octo port at the bottom center tunned to i think 36hz and these things freaking slam deep I rattle 3 of my neighbors windows I hear about it all the time now... my jeep doesn't rattle too bad really and nothing like tin cans like I was afraid of... I love DC audio great subs, great quality, they will smell for the first couple times of break in and then after a good 3 weeks of breaking in I put them to the dome and then they smelled after putting them on 2200 for about a few times of use then it went away again and now they will last a while like my dc lvl 3 12s I had before oh yeah dc audio or sonic I wish they came with stickers...smh..

Wiring Guide to Wire 1 DC Audio Level 3 10 m2.1 D2 Subwoofer

Mono Amp

Mono Amp - Option 1

2 Channel Amp - Bridged

Wiring Guide to Wire 2 DC Audio Level 3 10 m2.1 D2 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 DC Audio Level 3 10 m2.1 D2 Subwoofers

Mono Amp

Mono Amp - Option 1

4 Channel Amp

Wiring Guide to Wire 4 DC Audio Level 3 10 m2.1 D2 Subwoofers

2 Channel Amp

4 Channel Amp


This product is temporarily out of stock. May we recommend...

Kicker CompVR CVR104 (43CVR104)

• 350 Watts RMS
• 700 Watts Max
• Injection molded SoloKon cone
• Ribbed Santoprene Surround
• Stamped Steel Basket
• Perimeter Venting
• Spiralead tinsel-lead technology



JL Audio 10W0v3-4 10" Subwoofer

• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish



Cerwin Vega HS104D

• 800W Max
• 200W RMS
• Poly-Coated Paper Cone
• Foamed Rubber Surround
• Stamped Steel Shallow Mount Basket
• Vented Motor Structure
• Dual 2" 4-Layer Voice Coils



Kicker CompVX CVX104 (44CVX104)

• 600 Watts RMS
•1,200 Watts Max
• Polypropylene cone
• Ribbed santoprene surround with blue stitching
• Cast aluminum basket
• Large ceramic magnet
• High-temperature voice coils



Kicker CompC CWCS104 (44CWCS104)

• 250 Watts RMS
• 500 Watts Max
• Injection-molded polypropylene cone
• Ribbed polyurethane surround with yellow stitching
• Stamped steel basket
• Perimeter venting for heat management



Searches Related to the DC Audio (Soundlab) M2LV310D2


Model Number:




Internal SKU:


Internal Product ID:


Item Added to Cart

1800W Peak 10" Level 3 Series m2.1 Version Dual 2-Ohm Car Subwoofer - M2LV310D2


Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.


Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.


Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.



Don't see the accessory you're looking for?
View all available accessories for the DC Audio Level 3 10 m2.1 D2.