Sound Storm Labs (SSL) SS8

400W Peak (200W RMS) 8" SS Series Single 4-Ohm Car Subwoofer

Product videos
highlight-star-icon

• Peak Power: 400 watts
• RMS Power: 200 watts
• Injection Molded Polypropylene - IMPP Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 3.45"
• Sensitivity: 87 dB

Learn more about the ss8

We apologize

This item has been discontinued

Product Highlights


• Peak Power: 400 watts
• RMS Power: 200 watts
• Injection Molded Polypropylene - IMPP Cone
• Foam Surround
• Impedance: Single 4 ohms
• Mount depth: 3.45"
• Sensitivity: 87 dB

Description


Sound Storm Labs (SSL)

Authorized dealer

Product Details:

  • 8" Single 4 ohms Labs SS Series Subwoofer
  • Power Handling:
    • Peak: 400 watts
    • RMS: 200 watts
  • Injection Molded Polypropylene - IMPP Cone
  • Foam Surround
  • 2" High Temperature Voice coil
  • 8 mm Xmax
  • magnet motor structure
  • Resonance Frequency (Fs): 59.2 Hz
  • Sensitivity: 87 dB
  • Sealed box volume: 0.9 cubic feet
  • Top-mount depth: 3.45"
  • Cutout diameter: 7.25"
  • Authorized Internet Dealer
  • Protective subwoofer grille: No
  • 1-year Manufacturer's Warranty

  • Priced Individually

Subwoofer Wiring Guide


Wiring Guide to Wire 1 Sound Storm Labs (SSL) SS8 Subwoofer

Mono Amp

2 Channel Amp - Bridged

Wiring Guide to Wire 2 Sound Storm Labs (SSL) SS8 Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

Wiring Guide to Wire 3 Sound Storm Labs (SSL) SS8 Subwoofers

4 Channel Amp

Wiring Guide to Wire 4 Sound Storm Labs (SSL) SS8 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Specifications & Details


Subwoofer Specifications
Series
Labs SS Series
Subwoofer Size
8"
Peak Power Handling
400 watts
RMS Power Handling
200 watts
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
Voice Coil Material
Voice Coil Diameter
2"
Sensitivity
87 dB
Xmax (millimeters)
8 mm
Subwoofer Design
Round / Circle
Main Cone Color
Black
Woofer Composition
Injection Molded Polypropylene - IMPP
Woofer Surround
Foam
Magnet Structure
Magnet Type
Subwoofer Grille
No
Re-Cone Kit Available
No
CTA-2031 Compliant
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Sealed
Minimum Sealed Box Volume
0.9 cubic feet
Top-Mount Depth (Mounting Depth)
3.45"
Cutout Diameter
7.25"
Shallow Mount Installation
No
Electromechanical Parameters
Free-Air Resonance (Fs)
59.2 Hz
Equivalent Compliance (Vas)
0.564 liters
Total Speaker Q Value (Qts)
0.786
Electrical Q Value (Qes)
0.922
Mechanical Q Value (Qms)
5.334
What is in the box?
Paperwork
User manual
Warranty/Registration card
WITB: Subwoofers
Subwoofer
Other Accessory #6
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

SS8

Weight:

4.05lbs

Internal SKU:

ss8

Internal Product ID:

89592

Product and How-to Videos


Customer Ratings & Reviews



5 star
50%
4 star
50%
3 star
0%
2 star
0%
1 star
0%



Durability
4.5
Value
4.9
Features
4.4
Design
4.5
Usability
5
Sort by:

Loading...

Not Bad

Bought this to replace a factory sub in my 99' Expedition. It does the job, sub was blown before I got the truck so I can't compare the sound but for the money I'm not complaining.

By Michael on February 4, 2017 checkmarkIcon Verified purchase

8

found this helpful.

Pleasantly surprised

I installed this sub in a 2000 Suburban to replace the worn-out factory subwoofer. The original sub was 2 ohm, so I wasn't sure how much output I would get with the SS8 and the factory amp. I was pleasantly surprised by both the volume and quality of the sound. It was just the right amount to round out the low end and add some thump.

By Kevin D on March 28, 2020 checkmarkIcon Verified purchase

4

found this helpful.

Nice Surprise!

First, I ran these from the factory Dodge head unit radio, in parallel from back door speakers. Surprised they worked with enough power from the factory radio & sounded decent. Then I hooked them up to a 40w, 2-channel amp. Man, these little subs light up! I listen to rock, country, electronica, jazz (not so much hip-hop). Had to turn down the low freq cross-over setting on the amp, so they didn't get too much of a muddy sound. Worth the $15-20 bucks , if you can find them. Great sound, Highly Recommend.

By Anonymous on December 11, 2018

4

found this helpful.

Great value

I would recommend these for the price there not bad

By Anonymous on December 9, 2018

3

found this helpful.

Good cheap sub

Bought this because it was the cheapest 8" sub on the site. Honestly just planned on using it as a test sub for a Dayton plate amplifier I bought. Built a 0.9 cubic foot box for it and was very surprised. Of course it doesn't really hit the lows but mid and high bass is pretty good, great for what you pay. Running 70 watts from the amp to it and it's now under my desk providing bass for my PC system. Would recommend for a cheap easy sub.

By Tim on January 3, 2016

3

found this helpful.

Great Value

Fast Shipping great product could not find comparable speaker for this low price

By Gus on April 18, 2016

2

found this helpful.

Add-ons


Similar Products


Best selling similar products

NVX VCW82 Version 3 (VCW82v3)

• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(2)

$119.99

NVX VCW84 Version 3 (VCW84v3)

• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(2)

$119.99

Diamond Audio VSP8BMW

• 200 Watts Max
• 100 Watts RMS
• Glass Fiber Reinforced Cone
• High-Strength Stamped Steel Frame
• FEA Optimized High-Power Neodymium Motor Structure
• Separate Optimized Crossover Module

$449.99

Deaf Bonce DB-SA2508 D1

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Paper Cone
• Foam Surround
• Impedance: Dual 1+1
• Mount depth: 5.95"
• Sensitivity: 84.7 dB

$199.90

Kicker Solo-Baric L7S82 (44L7S82)

• Peak Power: 900 watts
• RMS Power: 450 watts
• Injection Molded Polypropylene - IMPP Cone
• Santoprene Rubber Surround
• Impedance: Dual 2 ohms
• Mount depth: 4-3/4"
• Sensitivity: 82.37 dB

$159.96

Related Searches


SS8 small

Item added to your cart.

Price: $29.99

Essential add-ons
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$89.99

$59.99

Add to cart
Six Function Digital Multimeter

Perfect addition to any toolbox

$14.99

$6.99

Add to cart
Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

$6.99

$6.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back