Belva BB5000Dv2 | 3000 Watt BB Series Monoblock Amplifier

Belva BB5000Dv2 (BB5000D v2)

5000W Max (3000W RMS) Class D Monoblock BB Series Car Amplifier

5000W Max (3000W RMS) Class D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohms, 1800W x 1 @ 2 ohms, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H


List price $899.99
Save: $640.00


Out of Stock - Backorder with warranty
Thanks , You Pay:

Item Condition: Brand new

The item is brand new and not used.


Add a protection plan

3 years for

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year


Authorized dealer

Power System Warning: This amplifier requires a charging system capable of at least 200 amps. If your vehicle's charging system isn't powerful enough, it will damage or destroy this amplifier and possibly damage your vehicle, as well as void your warranty on the amp. You must perform electrical system upgrades to provide the power this kind of amp demands. Visit our Mechman High Output Alternators store to find the right alternator for your vehicle. Check out this information, figure out what you need, or get with our sales team for expert support.

BB Series: Power, Power and More Power!

The BB Series by Belva are designed to get loud! These monoblock beasts are exceptional performance amps engineered to output maximum power. If you need an amplifier that can output heavy power levels without a problem, the Belva BB Series monoblock amplifiers are right for you!

High Quality, High Power Output

These amplifiers are built with a high quality, organized circuit board. Every amplifier in the BB Series has high power output. The BB5000Dv2 is capable of outputting 3000 watts of RMS power. This amount of power is sure to be able to adequately supply most subwoofer systems with the proper amount of wattage. Belva amplifiers will keep your woofers pumping out deep bass with honest sound reproduction and reduced distortion.

General Features:

  • BB Series Monoblock Class D Car Amplifier
  • 300 Amp ANL Fuse and Holder included
  • RMS Power Rating:
    • 4 ohms: 1200 watts x 1 chan.
    • 2 ohms: 1800 watts x 1 chan.
    • 1 ohm: 3000 watts x 1 chan.
  • Max power output: 5000 watts
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Input sensitivity:
    • Low level: 100mV-6V
  • Variable low-pass filter (40-180 Hz, 12 dB/octave)
  • Subsonic filter (12 dB variable from 20Hz - 50 Hz)
  • Frequency response: 20-30,000 Hz
  • 1/0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product history:

Belva BB5000Dv2 thumbnail
(newest, current model)
Belva BB5000D thumbnail
(previous model, replaced by Belva BB5000Dv2 (BB5000D v2))
Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
1200 watts x 1 channels
RMS Power @ 2 ohms
1800 watts x 1 channels
RMS Power @ 1 ohm
3000 watts x 1 channels
Power Specifications - Subwoofer Channel
Peak Power @ 4 ohm
2400 watts x 1 channels
Peak Power @ 2 ohms
3600 watts x 1 channels
Peak Power @ 1 ohm
5000 watts x 1 channels
Amplifier Specifications
Amplifier Series
Marine Certified
Amplifier Class
Number of Channels
1 - Mono
Total Peak Power Output
5000 watts
Total RMS Power Output
3000 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
Speaker Level Inputs
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
40 - 180 Hz
Subsonic Filter
20 - 50 Hz
Signal-to-Noise Ratio
80 dB
Bass Boost
0 - 12 dB
Bass/Gain Remote
Fan Cooled
Fuse Rating
300A x 1 
Total Fuse Rating
CEA-2006 Compliant
Sonic Certified Amplifier
Not Tested
Amp Bluetooth Connectivity
Hi-Res Certified
Authorized Dealer
Authorized Dealer
Authorized Dealer
What is in the box?
WITB: Amplifiers
Wired gain knob (wire attached)
Mounting screws (4)
User manual
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
  • Belva BB Version 2 Car Audio Amplifiers | Product Overview
  • How To Install an Amplifier: Car Amplifier Basics Part 2
Belva BB5000Dv2 (BB5000D v2)

Belva BB5000Dv2 (BB5000D v2)



Write a review

Overall rating distribution

5 star
4 star
3 star
2 star
1 star

By feature average rating



November 1, 2017

Very Good Value

First, this is NOT a 3000W Rms amplifier. It's a 2136 Amplifier that can do in dynamic power up to 2810W. I did a dyno test on this amp to show the true power.

BUT, if you forget the rating and go by how this amp actually performs. its an INCREDIBLE VALUE. There is no other amp on the market that touches this amp from a cost per watt stand point.

If you are looking for a 2000W Rms amp, and don't have a lot of money to spend, this is the amp for you.


found this helpful.


September 12, 2017

Belva BB5000 V1

Happy Customer. I've purchased from Sonic many times, and will continue to do so.
For this amount of power you will not find another amp for the same price. I bought the first version 4 years ago, and it's still slappin today. Electrical is 1awg and an extra battery, and it powers my 18" PSI lvl3 perfectly at 4ohm. I've had it powering several systems at 4, 2, and 1 ohm at it never disappoints. Just make sure you have upgraded electrical, or you'll fry the amp and your car!
If my version 1 dies somehow, I will without question buy another Belva 5k. Version 1 was $250, so you can't beat $200 for the new version.


found this helpful.


August 25, 2018

Great watts/dollar!!!

This amp makes serious power! For $199 I don't think it can be beat. Ran 4 hifonics 12's at a 2 ohm load and couldn't believe the punishment it gave those poor subs, I actually thought about running 8 of them!


found this helpful.


November 2, 2017

Great Value

This thing puts out real power to my my 2 JL12w6, the adjustable bass boost is a great feature, I have mine set at 30 hz and just turned up maybe 4 dB and it’s really cleaned up my bass with more deep clean sound, I’ll never use another amp without this feature. This amp is just as powerful as my expensive Fosgate 1500 it replaced. I run it at 4 ohms getting 1200 Watts rms, I have a high output alternater a yellow top battery and 0 gauge wire. It’s been 2 months and so far so good I use it everyday and it gets warm but not hot, I expect it to last a while because I’m running it at 4 ohms????


found this helpful.


January 10, 2020

Better than a more expensive amp I tried.

Very solid and good output @ 1 ohm on a Soundqubed HDX3 15" Subwoofer ported. Had a Wolfram C2400 and it was causing noise on fast transient music. Very pleased.


found this helpful.


September 22, 2018

Belva BB5000v2

Wasn't expecting this amp to be so powerful. I had a RF T2500.1bdcp and it sounds almost identical. The belva doesnt need as much electric power as the T2500.1bdcp.. Im glad i found this amp


found this helpful.

Car Stereo Kyle

August 3, 2017

Best deal around for $200

So I'm not gonna go and say this is the best amp ever, because the sound quality is not that of a sundown or crescendo. But that being said this amp far outperforms the power capabilities I expected and if tuned right sound really good. Just be careful with the bass boost because it will throw off your whole range of output. I am very pleased with the amp and have been in the car audio business for 17 years. I'm about to buy another. If you need a powerhouse on budget I would definitely recommend the belva.


found this helpful.


April 22, 2016


So this amp not only looks good, but does its job well. I'm pushing 2k-rms on this 3k-rms amp, it does get warm (not hot). I don't have any bad things to say about it. I'm happy with it, and I would tell anyone to buy the Belva BB5000Dv2!!! Oh yea the amp overall seems sturdy.


found this helpful.


April 28, 2020

Belva BB5000Dv2 (BB5000D v2)

Great amp and it does exactly as it should if not more.


found this helpful.


January 10, 2019

Best Belva amplifier for your buck!

Super powerful Belva, better have your install correct! It's up a little for a 1/4 of a turn on the gain. And the other gains are calibrated. So darn powerful...


found this helpful.


October 31, 2020

Best “Bang” for your buck

You literally can’t beat this amp for this price. I’ve had many higher end amps that couldn’t perform like this


October 1, 2020

Don't want it

Hey I don't want this item I just wanted see how can I just get my money back


found this helpful.


May 2, 2020

We love it!

we love it! Blew our fuses at first until we were able to get it right. Recommend!


This product is temporarily out of stock. May we recommend...

Kicker CXA400.1 (46CXA4001)

• 150 Watts RMS x 1 @ 4 ohms
• 300 Watts RMS x 1 @ 2 ohms
• 400 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio



DC Audio 10.0k

• RMS Power: 3000W x 1 @ 4 ohms, 5500W x 1 @ 2 ohms, 10,000W x 1 @ 1 ohm
• Strappable for Up to 20,000W of Power
• Variable Low Pass Filter
• Dimensions: 11.5" W x 37" L x 2.6" H



Hifonics ZG-3200.1D

• 3200 Watt Class D Amplifier
• Bass Remote Included
• Angled Terminals for Easy Installation
• Speaker and RCA Level Inputs


Hifonics ZG-1200.1D

• 1200 Watt Class D Amplifier
• Bass Remote Included
• Angled Terminals for Easy Installation
•RCA and Speaker Level Inputs


DC Audio 9.0k

• RMS Power: 2400W x 1 @ 4 ohms, 4800W x 1 @ 2 ohms, 9000W x 1 @ 1 ohm
• Strappable for Up to 18,000W of Power
• Variable Low Pass Filter



This item is frequently compared to these items

Belva BB2000Dv2 (BB2000D v2)

• RMS: 540W x 1 @ 4 ohms, 900W x 1 @ 2 ohms, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H



Belva BB3000Dv2 (BB3000D v2)

• RMS: 780W x 1 @ 4 ohms, 1260W x 1 @ 2 ohms, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H



Searches Related to the Belva BB5000Dv2


Model Number:




Internal SKU:


Internal Product ID:


Item Added to Cart

5000W Max (3000W RMS) Class D Monoblock BB Series Car Amplifier


Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
Add Warranty
3 years of protection

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!


FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.



80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver



Don't see the accessory you're looking for?
View all available accessories for the Belva BB5000Dv2 (BB5000D v2).