See all parts that fit your 2004 Intrepid
200W M Series 2-Channel Class D Full-Range Marine Amplifier with High-Speed NexD Switching Design
Product highlights
• RMS: 75 W x 2 @ 4 ohm, 100 W x 2 @ 2 ohm, 200 W x 1 @ 4 ohm Bridged
• NexD Switching Technology
• Advanced Rollback Protection
• Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
• Detented, Calibrated Filter Freq. Potentiometer
• Includes Amplifier Wiring Kit
This potent 2-Channel amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in an ultra-compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious power, delivering a full 200W of continuous power into a 4 ohm load (14.4V, 1% THD) Bridged. Targeted specifically for an audiophile-grade subwoofer or two satellite system, the M200/2 includes a variable mode low-pass/high-pass filter with a continuously variable cutoff frequency selection from 50-500 Hz.
With the addition of an HD-RLC remote level control (sold separately), you can control the volume of one, two or all three channel pairs of the M600/6v2 from the front of the vehicle or boat. This amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
JL Audio's signature Advanced Thermal Rollback protection system eliminates annoying thermal shutdown events to keep the music playing, even under the most demanding conditions. Should the amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases.
From the same minds that gave us the technology found in the 'Slash' amplifiers, JL Audio has taken the simple fixed PWM design approach and enhanced it with a very high switching frequency. Full-range NexD amplifiers and channels feature a variable, ultra-high speed version of the NexD technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design.
JL Audio M200/2
200W RMS M Series Class-D 2-Channel Marine Amplifier
Quantity: 1
JL Audio M200/2 owner’s manual
Belva BAK82BL
8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - BLUE
Quantity: 1
|
(newest, current model)
|
|
(previous model, replaced by JL Audio M200/2 with Amplifier Wiring Kit)
|
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$111.96
List price $159.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
280W Peak (90W RMS) 6x9” SXE Series 2-way 4-ohm Coaxial Speakers
$56.99
List price $71.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
Best selling similar products
• Six Speaker Audio Upgrade System
• Includes 6.5" component front speakers, 6.5" coaxial rear speakers, pair of 2-channel amplifier
• Direct fit for a hassle-free installation, fitting perfectly into the select 2021-2024 Bronco
• Designed for OEM Base model audio systems or aftermarket source units
• System is designed to withstand harsh outdoor environments
• Plug and Play design for easy installation
• Comes with all necessary mounting and installation hardware
$1444.99
List price $1899.99
Rockford Fosgate R500X1D 500 Watt Car Amplifier + Amp Wiring Kit Bundle
• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
(76)
$344.98
List price $369.98
Rockford Fosgate R2-1200X1 with Amplifier Wiring Kit
• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit
(148)
$506.68
List price $593.98
NVX Audio Upgrade Kit – NPKG212 Bass Package with 2 Pair 6.5" Speakers
• 12" Loaded Dual Subwoofer Enclosure with Amplifier
• 500 watts RMS
• Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Includes 6.5 Co-axial Speaker and Damping Kits
(257)
$486.93
List price $677.43
NVX Audio Upgrade Kit – QB10SPA with 2 Pair 6.5" Speakers
• 10" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control
• Includes 6.5(2) Co-axial Speaker and Damping Kits
(246)
$311.43
List price $533.42
Rockford Fosgate R500X1D Amplifier + Free Belva BAK42BK 4 Gauge Amp Kit
• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
(80)
$309.99
List price $369.98
Kicker HS10 (51HS10) w/ Free Amp Install Kit
(99)
$319.99
List price $489.96
Rockford Fosgate R2-500X1 with Amplifier Wiring Kit
• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• CEA-2006 Compliant
• Top Mounted Control Panel
• Class-D Amplifier
• Includes Amplifier Wiring Kit
(137)
$364.98
List price $453.98
Kicker 46CXA8001 with Amplifier Wiring Kit
• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit
(188)
$324.48
List price $389.98
Kicker Subwoofer (43DC122) and Amplifier (46CXA4001T) w/ Free Amp Install Kit
(128)
$570.00
List price $679.94
Manufacturer:
Model Number:
M200/2, XKIT82
Weight:
6.77lbs
Internal SKU:
m2002_xkit82
Internal Product ID:
181367
| 5 star |
|
70% |
| 4 star |
|
24% |
| 3 star |
|
3% |
| 2 star |
|
0% |
| 1 star |
|
3% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Cheap kit that did it's job
Inexpensive kit that works great for the 300 watt amp I'm running.
75 found this helpful
Belva BAK82BL (Blue) Review
Overall this was a pretty good kit for the money. The one downside was I was missing the following and had to go out and buy these to finish my install.
One black rubber firewall grommet
One 8 Gauge Blue chrome plated ring terminals
One 8 Gauge Black chrome plated ring terminal
Three 18 Gauge Blue Spade terminal
Two 18 Gauge Black Spade terminal
One 18 Gauge Red butt connector
Ten 4" Black zip ties
71 found this helpful
No complaints
Good amp kit for the price. Not sure if it is true 8 gauge but at this price can't complain. Plus it is everything you need
Verified purchase
70 found this helpful
Great value
Worked great for the system I installed. It came with everything to complete the project. Sonic has great service and fast shipping.
Verified purchase
69 found this helpful
Great deal
Worked great for a 240 watt amp powering 4 6x9's in a custom built enclosure
Verified purchase
69 found this helpful
AMP. KIT
VERY GOOD QUILTY PRODUCT AND HAD ENOUGH WIRE FOR PROJECT
67 found this helpful
Not worth it.
This wiring kit isn't worth your money. Just buy a decent one for $50 than wasting your time with this piece of crap.
Verified purchase
70 found this helpful
Nice cabling
Product performs as advertised. Came with most of necessary hardware
66 found this helpful
Great Value!
Its a great wiring kit for the money. You cant beat it. Wires are nice and flexible, unlike other cheap wire thats stiff. Id buy again.
Verified purchase
64 found this helpful
Just what I was looking for!
I purchased this to go in the trunk of my 1966 mustang. I purchased it after reading another review of an install in a mustang. It fit perfectly in the side of the trunk and did not take up a lot Space. Sounds great.
59 found this helpful
Massive Audio MT1 (Sold Individually)
700W Peak (175W RMS) 1" 4-ohm Pro-Audio Super Bullet Tweeter
$79.99
List price $89.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
