See all parts that fit your 1992 Shadow
2-Channel 110W Line Output Converter with Gain Controller for select 2018-2025 vehicles from Toyota with Non-Amplified Systems
Product highlights
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2018-2025 vehicles from Toyota with non-amplified systems
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
600W Peak (300W RMS) 6.5" Mille PRO Series 3-way 4-ohm Component Speaker System
$999.99
List price $1175.00
250W Peak (200W RMS) 6.5″ PNW Series 2 Way Component 3-ohm Speakers
$319.00
List price $339.00
600W Peak (70W RMS) 6.5" XED Series 2-Way Coaxial 4-ohm Speakers
$49.99
List price $59.99
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense.
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
The vehicle you have selected 1992 Dodge Shadow is not compatible. Change vehicle or See list of compatible similar products
Best selling similar products
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ram, Dodge, Jeep with non-amplified systems
(10)
$93.99
List price $104.99
• Amplifier and subwoofer integration interface for select 2013-2024 vehicles from Ram, Jeep, Dodge
• Compatible with amplified vehicle systems
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier and subwoofer
• Delivers 5V RMS pre-amp output with bass equalization and level control
$239.00
List price $329.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2014-2025 vehicles from Hyundai, Kia with non-amplified systems
(1)
$93.99
List price $104.99
• Plug and Play T-harness for faster installation
• For select 2019-2024 vehicles from Chevrolet, GMC, Cadillac
• Designed for Ethernet amplifiers
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
(3)
$517.99
List price $613.99
• Plug and Play T-harness for faster installation
• For select 2010-2021 vehicles from Chevrolet, GMC, Cadillac
• Designed for MOST amplified systems
• Designed to be used with factory radios
• Selectable 31-band graphic EQ or 5-band parametric EQ
• Settings adjusted via Bluetooth in a smart device
• Selectable high pass, low pass, or bandpass filters
$638.99
List price $709.99
• Amplifier integration interface for select 2003-2014 vehicles from Ford, Lincoln, Mercury
• Compatible for vehicles without amplified THX and Sony systems
• 4-channel RCA output
• Linear 20-20000 Hz sound reproduction
• For use with an aftermarket amplifier
(26)
$56.99
List price $129.00
• Amplifier, LOC, and sound processor integration T-harness for select 2018-2024 vehicles from Ford
• Provides necessary high-level inputs and speaker outputs
• Compatible in non-amplified vehicles with 32-pin connector
• Works with PAC LocPro Advanced LOCs
• Works with amps and sound processors with speaker-level inputs
$63.00
List price $109.00
• Amplifier integration interface for select 2013-2023 vehicles from Ram, Jeep, Dodge
• Provides 2-channel non-fading output
• For use with an aftermarket amplifier
• Delivers switchable 4-volt or 5-volt RMS pre-amp output
(4)
$419.00
List price $499.00
• Active 2-Channel Line Output Converter
• Designed to provide 2-channels of low-level audio
• Includes gain level controller to adjust the overall output
• Compatible with select 2011-2025 vehicles from Ford with non-amplified systems
(3)
$93.99
List price $104.99
Manufacturer:
Model Number:
AXLOC-TY3
Weight:
0.83lbs
Internal SKU:
axlocty3
Internal Product ID:
199363
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great time saver. No cutting needed.
Fit perfect in my 2019 Camry SE with the base stereo system. I added a 10" Rockford Fosgate sub pretty easy. No need to search for wiring diagrams or cut the stock harness. I put the bass knob on the kick panel above the gas pedal. You might also want to run a switch from the remote wire and install it next to the bass knob just in case you want to turn the amp off.
Verified purchase
8 found this helpful
360W Peak (120W RMS) Loaded Single 8" Vented Amplified Bass Tube Enclosure
(14)
$199.95
List price $219.95
Kicker 10C15D4 Subwoofer Pair Combo
Pair of 15" Dual 4 Ohm Comp Series Car Subwoofers
$219.90
List price $379.90
JL Audio C2-650x (OPEN BOX COMPLETE)
450W 6.5" 2-Way Evolution C2 Series Coaxial Car Speakers
$179.95
List price $199.95
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
