Universal-Fit Audio for 1978 Ford LTD

---

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• Dual 8-gauge input and output to 8-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Smart Key Module Interface
• For Audi A8, Porsche Cayenne Volkswagon Touareg Models Equipped With the Smart Key Ignition System
• Ready to Install Right Out of the Box
• No Programming Required
• Factory Alarm Disarm

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Video cable extension
• Designed for STZ-RF200WD

• 12" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Wired Remote Bass Level Control

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 600 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• 10” RGB LED ring for speakers
• Sealed for all elements use
• 1/2" Spacer Depth
• 16 Million Different Hues of Light
• Pre-drilled holes for easy installation

• Peak Power: 900 watts
• RMS Power: 450 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-3/4"
• Sensitivity: 82.37 dB

• Universal 40" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• Adds additional inputs to display to monitor(s)
• Works great with vehicles limited to only one video input
• Equipped with a noise resistant aluminum shield
• Kit includes module and male to male RCA cable adapter

• 10" Amplified Loaded Subwoofer System
• 300 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Mounting clamp for Stealth soundbars with 1.5" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• Works with Most 5-1/4" Speakers
• Factory Style Finishes
• Heavy Duty ABS Plastic
• Works with 6" to 6.5" Speakers

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• 12 Volt 30/40 Amp Economy Relay
• Voltage Power: 12 volts
• Ampere Power: 30 and 40 amps
• Vehicle Application: Universal
• Color: Black

• For Finishing Off a Double DIN Radio Installation
• Can Also Finish off Two ISO Stacked Radios
• Trim Ring is Scored on Back for Easy Trimming
• Compatible with [[!afgShortRange]

• 80-Amp continuous / 150-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• 10" RGB LED Subwoofer Light Ring
• IPX7 marine grade rating
• Provides RGB illumination of the whole woofer cone area
• Includes two frames with 15 LEDs each
• Designed for Pioneer TS-ME100WC and Pioneer TS-ME100WS (Sold separately)

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.45"
• Sensitivity: 86 dB

• OBD2 plug in Bluetooth wireless bootloader
• Combines XKLOADER2 and XKLOADER3 functionality
• Supports DS4 echosystem Bluetooth flashing
• Includes all harness and programming tools necessary

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for Tight Spaces (trucks/hatchbacks)
• Fits Most 12" Subwoofers
• 0.75 CuFt
• fully carpeted
• Fully Caulked and Sealed Tight

• Posi-Lock Mini Butt Connectors
• Locking Twists Prevent Disconnection
• 20-26 AWG
• Package of 8

• 200 watts x 2 channel @ 4 ohm
• 300 watts x 2 channel @ 2 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Metra Bass Blocker
• Non-Polar 10% Capacitor
• 4 Ohm: 400Hz
• 8 Ohm: 200Hz
• 100 Volts
• 99 uf
• White Heat Shrinked Capacitor
• Yellow Color Coded Silver Wire

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• Non-digital 150 farads capacitor
• Made for systems up to 1200 watts
• Includes mounting hardware for a secure installation

• Ported enclosure with 1 12" W6 v3 Series Subwoofer
• 600 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 14.5" L x 16" H x 24" W

• 240 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 700 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• Class D 2 ohm Stable 2-Channel-Channel Amplifier

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

• 12" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• Ultrasonic Sensor for Security Systems
• Detects air pressure changes in the cabin of the vehicle
• Detect thieves entering vehicle without glass breakage
• Adds extra protection when used in conjunction with other security systems

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Digital LED lights Bluetooth controller
• IOS and Android Compatible via DS18 LC App
• Bluetooth supports 100 ft. range
• IP66 marine rated; withstands harsh environment

• 220 watts x 4 channel @ 4 ohm
• 355 watts x 4 channel @ 2 ohm
• Bridged: 700 watts x 2 channel @ 4 ohm
• Total RMS Power: 1420 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• (2) 1/0 AWG - 10 AWG plus (2) 4 AWG - 10 AWG Out
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
• Nickel finish for durability

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 12" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW124, NSW122v3, NSW124v3, VSW122v3, VSW124v3, SMW12D4)
• Works with Most Other 12" Subwoofers
• High Quality Construction

• Life Expectancy: 50,000 hours
• 12-Watts
• IP67 rating
• Cool White (Color Temperature)
• Beam Pattern: Linear

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• Replacement LED headlight bulbs
• Good for tight applications
• Compact design doesn’t compromise performance
• Output of 6,000 lumens of cool white (6500K) illumination
• HP13 LED Single Beam
• Sold as a Pair

• 6.5" Quad Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.50 cubic feet
• High-output XXL enclosure with double flush baffle

• 2-Way Remote Start Keyless Entry Car Alarm System
• Includes (1) 2-way LCD transmitter and (1) 1-way LED transmitter
• 1 mile (5280 feet) range
• Includes internal antenna and USB port
• Programming and command buttons

• Platinum plated AGU style fused distribution, flexibility of multiple wire size inputs and outputs. Allows for 2 AGU style fuses. Accept 1/0 AWG and 4 AWG inputs. (2) 4 AWG/8 AWG outputs.

• Manual Reset Circuit Breaker
• Power Rating: 150 Amps
• Push Button Reset
• High Current Protection
• Integrated Holes for Simple Mounting
• Compact and Lightweight Design

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Red

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Warm White

• 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• Perfect for 1600 Watts Amplifier Setup
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable