Universal-Fit Audio for 1980 Ford E Series

---

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Yellow LED illuminated ring

• 36" RGBW LED wire extension
• Male micro-DIN 5-pin and female micro-DIN 5-pin connectors
• Designed for use with Metra RGBW-CB2 (Sold separately)

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Fits 12" CompR Series Subs
• Includes Mounting Hardware and Screw Covers
• ABS Plastic Design
• Protects Subs

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Features Qualcomm Quick Charge 3.0 - Can replace your cigarette lighter socket or add as a new one
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)
• Digital Volt Indicator display the status of your battery or your charging system

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• 6.5" Speaker grilles for Infinity REF607F
• Black steel mesh grille design
• Includes plastic trim rings and Infinity logo on grilles
• Will be shipped in a brown box

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 8" LED acrylic ring and LED strip for Wet Sounds speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds 8" XS and SW marine speakers (Sold separately)

• Peak Power: 600 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 8" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Accepts 4 AWG or 8 AWG wire
• Custom tooled solid brass
• HPP plating for superior corrosion resistance
• Platinum Finish

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.250"
• Color: Black

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 10 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Gray

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• Empty Dual 6.5" Speakers and Single DIN Radio Overhead Console Enclosure
• Durable ABS plastic construction and matte black finish
• Paintable for custom installation
• Water-resistant design

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Two window Kit
• Intelligent safety sensor

• Dual Side View Blind Spot Camera Kit
• Compatible with 2007-2018 Jeep Wrangler JK (2-Door and 4-Door models)
• Mounting Style: Bracket Mount
• Viewing Angle: 80 degrees
• Resolution: 648 x 488 (CVBS) / 1280 x 720 (AHD)
• Waterproof: IP67
• Nightvision: Low-light at 0.1 lux

• Bulk Pack of T-Tap Connector
• Allows for fast and easy splicing of wires
• Quickly tap into wires and cables
• Designed for tapping into 22/18 Gauge (AWG) wire
• Color: Red

New - Motorized WHITE 50Watt LED Spot Light with Remote Swivel Functionality

• Marine Y-Adaptor Cable
• Compatible extension cable for PMX-1R and PMX-0R

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design • RMS Power: 1200 Watts
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

• 75 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 150 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• 700 watts x 1 channel @ 1 ohm (subwoofer output)
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 1100 watts
• Class D 1 ohm Stable 5-Channel Amplifier

• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

• 1/8" split-braid sleeving
• Protects wires, cables, hoses and more
• Great for automotive, marine or office applications
• 250 feet of tubing included
• Resists cuts and other abrasions

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 1/0 gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 4000 watts
• Stinger SHD201 water-resistant ANL fuse holder included

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology