Universal-Fit Audio for 1989 Cadillac Eldorado

---

• Universal underseat amplifier bracket
• Designed for Jeep JL and JKU front seat configurations
• Includes nutserts and drill bit for easy installation

• Water-Resistant Master MAXI Fuse Block
• 4 AWG to 8 AWG Power Wire
• Used In Under-Hood Applications For Amp Installation

• USB / HDMI / Auxiliary Replacement Panel
• Replaces the factory USB and auxiliary panel
• Compatible with 2011-2020 Hyundai, Kia

• 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 2000 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL Fuse Holder with 100 amp fuse
• Complies to American Wire Gauge standards

• 20 Ft. Of 12 AWG Q-Series Speaker Wire
• Direct-Connect Engineering
• Twisted-Pair Technology
• Full Spec Wire True to Gauge
• Hyper-Flex Technolog

• 125 watts x 4 channel + 300W x1 @ 4 ohm
• 200 watts x 4 channel + 500W x 1 @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 800W @ 1 ohm
• Total RMS Power: 1600 watts
• Class D 1 ohm Stable 5-Channel Amplifier

• 20ft. 9-Conductor 18 Gauge Twisted Multi-Use Wire
• Ideal for OEM Integration connections or 4-Channel speaker wiring
• Colored coded design eliminates confusion during installation

• 6.5" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.30 cubic feet
• Compatible for Sundown SA65V2 and similar subwoofers (Sold separately)

• Universal Double DIN housing
• Designed for the installation of Double DIN radio
• Can be mounted on top or underneath any surface

• 1-Way Remote Car Starter
• 5-Button LED Transmitter
• 2000 feet of range (0.37 mile)
• Dual 2-way data port
• Multi-vehicle functionality

• Low-Profile Fixture
• For M880-ETXv3, M770-ETXv3 and MX770-ETXv3 models
• Fixture is designed for late-model MasterCraft mounting only
• Sold in pairs

• 30 Customizable Modes (including Patriot & Christmas)
• LEDCAST enabled
• Dual Remote controls
• Connect up to 4 zones
• Waterproof and Shockproof

• Non-digital 150 farads capacitor
• Made for systems up to 1200 watts
• Includes mounting hardware for a secure installation

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• 35" High Density ABS Universal Speakers Enclosure
• Durable Injected High Density ABS Medium Density Fiberboard (MDF) construction
• Houses 4 6.5" speakers and 2 3" tweeters
• Water Resistant IP65

• Water Resistant Speaker Plugs
• Male and Female Plugs included
• 18 Gauge Input

• 4-Channel input and 8-Channel out digital sound processor
• Bluetooth connectivity via DS18 DSP App
• IOS and Android Compatible
• Durable coated PCB

• 3.7M and 2.0M Recording
• 2 Megapixel Recording (rear cam)
• 3.0" LCD Display (front cam only)
• Integrated GPS system
• IP67 waterproof rating (rear cam only)

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for flat surfaces
• For M-Series and MX-Series JL Audio Tower Speakers

• 2-Channel 8000 Series RCA Interconnect Cable
• 17 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 12 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Front and Rear Door
• Pack includes four 12" x 36" sheets

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 2-11/16"
• Sensitivity: 81.8 dB

• Underglow Chase Kit UTV, ATV, Golfcart
• Includes 6 sealed LED tubes, mounting hardware, and connect chasing controller
• Water-resistant Heise connector
• Includes Pro Controller, RF card remote

• 50 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Dual ANL Fuse Holder
• O GA In/Out
• Stinger Logo on Case
• Protective Cover Included

• 120 feet 16 gauge Marine and Powersports Speaker Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Black
• Includes 20-gauge control wire for controlling RGB LED light strips

• Universal 1" Speaker Spacer Rings for 6" to 6.75" Aftermarket Car Speakers
• Color: Black
• High Grade ABS Plastic Construction
• Factory Matched Texture Style

• 75 watts x 2 channel + 250 watts x 1 channel @ 4 ohm
• 100 watts x 2 channel + 400 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 3-Channel Amplifier

• 750 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• Total RMS Power: 750 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

&bull Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff

• Pre-cut and loomed power/ ground & speaker wire harnesses
• 4GA into dual 8GA power / ground wire
• 150 amp MIDI fuse
•Fusing and pre-terminated wiring

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 800 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• 100 watts x 4 channel + 500 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• 700 watts x 1 channel @ 1 ohm (subwoofer output)
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 1.5 ohm Stable 5-Channel Amplifier

• 4-Channel 4000 Series RCA Interconnect Cables
• 17 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket

• Peak Power: 3000 watts
• RMS Power: 1500 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.07"
• Sensitivity: 86.20 dB

• 6" Single Row LED Light Bar
• Water-resistant IPX-6 Rating
• 15° Spot Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes mounting bracket, hardware, and wiring

• 8" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Peak Power: 600 watts
• RMS Power: 150-300 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 4 1/8"
• Sensitivity: 82.1 dB

• Wired marine remote control with display
• 2.4" Monochrome segmented TFT LCD backlit display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• 1/0 Gauge Amplifier Kit
• Power Kit
• Designed for Installing Two Amplifiers
• True AWG Cable
• Includes Distribution Blocks, Fuse Holders, Ground Lugs, and Installation Accessories
• For Systems up to 2500 Watts

• Marine Remote Control Extension Cable
• Compatible with select Kenwood Receivers
• Black
• 10 Foot Length

• Ported enclosure with 2 12" Comp Series Subwoofer
• 300 watts RMS (600 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 17-1/4" L x 16" H x 32-7/16" W x 13-7/8" W2

• 250 watts x 4 channel @ 4 ohm
• 500 watts x 2 channel @ 2 ohm
• Bridged: 1000 watts x 2 channel @ 4 ohm
• Total RMS Power: 2000 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• 2000 watts x 1 channel @ 2 ohm Bridged
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Custom Installation Screen Bucket
• Designed for the installation of Stinger UN1810 into the dash or trim panel
• Made from ABS plastic material

• Empty 8" Dual Ported Subwoofer Enclosure
• 3/4" medium density fiberboard construction with sprayliner finish
• Vented front-firing design enhances sound projection
• Under seat enclosure mounting

• One Pair of Long and One Pair of Short SAE Posts for SK-BT20*
• Posts with M5 that has 12mm and 24.5mm Posts
• Two Sets

• ProWedge 13" W7AE Loaded Sealed Subwoofer Enclosure
• 3000W Peak
• 1500W RMS
• 3 Ohm Final Impedance
• High Grade Black Carpet Finish
• Engraved JL Audio and W7 Logos
• Rear Firing Design
• 10th Anniversary Edition W7 Subwoofer

• Replacement LED headlight bulbs
• Good for tight applications
• Compact design doesn’t compromise performance
• Output of 6,000 lumens of cool white (6500K) illumination
• HP13 LED Single Beam
• Sold as a Pair

250 Ft. of 16 Gauge Matte Gray Speaker Wire • Length: 250ft • Flexible Jacketing • Easy Installation

• Bi-amplification available
• Three-position switch for tweeter level adjustments
• Hi-Boost control
• Extremely high quality bi-metallized polyester film capacitors
• Air wound inductors built on pure copper-wire
• High power rating Wirewound resistors
• Dimensions: 7.67" x 4.68" x 1.61"

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Rubber Surround
• Mount depth: 6.89"
• Sensitivity: 82.7 dB

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 800 watts x 1 channel @ 1 ohm
• Total RMS Power: 800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 300 watts
• RMS Power: 120 watts
• Impedance: 4 ohm
• Wired remote subwoofer control included
• PWM MOSFET Power Supply