Universal-Fit Audio for 1992 Mazda 626

---

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Pair of 2-Way Universal Pod for 6.5" loudspeaker and 1.5" tweeter
• Enclosure comes in 1 set (left and right)
• Injected high density ABS plastic construction
• UV protected and all-element ready

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• USB RTA Microphone for measuring AFC
• Highly sensitive measuring microphone for home theater, car audio and acoustic systems
• Measures the frequency response, phase response and delays
• Designed for use with SPL-Lab Measuring Center software for Windows and Android

• Switchable Positive or Negative Trigger
• Slim and Compact Design
• Plug and Play Connection

• Quick Disconnect
• Up to 4 Gauge Power Wire
• Polarity Identification for Safety

• 4 Gauge 4000 Series Power & Signal Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• 2-Channel RCA Interconnect Cables
• Pre-Terminated Power Connections
• Tru-Spec Wires

• Peak Power: 500 watts
• Built-in A/B amplifier
• All-terrain system with IPX5 rating
• (8) 3" Full-range speakers
• (2) 1" Dome PEI (Polyetherimide) tweeters
• USB playback and charging
• AUX input for smartphones and MP3
• Dimensions: 3.7" W x 3.29" H x 37" D

• Master ANL Fuse Holder
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Ouput Gauge Size: 1/0 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 1
• Brass material with marine stannum plating

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 3-Position Compact Fused Ground Distribution Block
• One 1/0 - 4 AWG input
• Three 4 - 8 AWG outputs
• Water-resistant solid brass construction
• TPE-wrapped soft touch with dual gasket sizes

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 80-Amp continuous / 150-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• 200 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

• SiriusXM Connector to AUX Input Convertor
• Converts SiriusXM connector to a pair of analog auxiliary inputs
• Works on MediaMaster stereos
• Features 2 volt RMS input sensitivity

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.45"
• Sensitivity: 86 dB

New - Motorized WHITE 50Watt LED Spot Light with Remote Swivel Functionality

• Bulk Pack of T-Tap Connector
• For 12/10 Gauge (AWG) Wire
• Yellow
• Package of 50

• LED Lighting System
• (6) 1-Watt LEDs
• ECE R10 Certified
• Available in white or amber
• Water-resistant IP65 rating
• 16 self-controlled patterns

• Smooth powder-coated silver finish tower speaker fixed clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 5 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• Hard case and accessory kit for AudioControl DM-RTA
• Laser-cut foam interior
• Includes all necessary hardware and accessories

• 72" RGB LED Antenna Whip
• 360-degree illumination for more visibility
• 92 customizable modes, 16 speed levels, and 16 brightness levels
• Controllable with BLEDIM2 app for Apple and Android

• 1/2" DynaLiner High Performance Insulation Kit
• Used on Top of Dynamat
• Provide High Acoustic Absorption and Excellent Thermal Insulation
• Contains One 32" x 54" Sheet
• Ultra Lightweight & Flexible

• Retain Factory Steering Wheel Controls with Aftermarket Stereo
• Compatible with More than 1700 Vehicles
• Works with Most Aftermarket Stereo Brands
• Assign Each Control a Secondary Function
• Program it Yourself with a Windows Based Computer

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• 400 feet 16 gauge K-Series Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Frosted Clear

• 1400 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 3600 watts x 1 channel @ 1 ohm
• Total Peak Power: 5000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• LCD 2-Way Responder Remote for Python Responder 460
• 15 Channel SHF Transmitter
• 2/66 (18 quintillion) Rolling Codes

• Fits all standard Mini 3.5 mm (1/8 in.) jacks, including recessed designs
• Left and Right Channel Male RCA Plugs
• Pure OFC Copper Conductors with Polyethylene Dielectrics
• Machined Brass Connector Elements

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Posi-Lock Mini Butt Connectors
• Locking Twists Prevent Disconnection
• 20-26 AWG
• Package of 8

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design • RMS Power: 1200 Watts
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

• 8 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 200 Amp Battery Isolator
• 200 Amps at 12V Continuous
• 300 Amps Surge
• Switching Power: 10 - 16 VDC

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

• Works with Mini ANL (MANL) or AFS Fuses
• Accepts 4 or 8 Gauge Wire
• All Brass Construction
• Polycarbonate Base and Cover

• Peak Power: 40 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• Dual 2-1/2 speakers enclosed in sealed pods
• Bluetooth support and audio playback
• USB 5V/1A charging for smartphones

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Mesh grille for select NVX 10" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• Multi Zone Control (PMX-5 & PMX8)
• Front Panel Sub Control
• Waterproof Rotary Encoder Volume Control
• Front Panel Illumination Control
• IPX6 Front Panel Certification
• Back Lit LED Button Illumination

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• 1/0-gauge copper ring terminals
• Package includes 10 ring terminals
• Designed with closed end pads
• Impenetrable shield against moisture

• 31" Universal Replacement Antenna
• Provides radio reception to your vehicle
• 3-section removable heavy-duty stainless-steel mast
• 60" detachable cable

• Material: 0.75" MDF
• Inner Diameter: 5.85"
• Outer Diameter: 7.5"

• Platinum plated AGU style fused distribution, flexibility of multiple wire size inputs and outputs. Allows for 2 AGU style fuses. Accept 1/0 AWG and 4 AWG inputs. (2) 4 AWG/8 AWG outputs.

• 6.5" Quad Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.50 cubic feet
• High-output XXL enclosure with double flush baffle

• Sealed truck enclosure with 1 10" Prime R2 Series Subwoofer
• 200 watts RMS (400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 19" L x 13.5" H x 5.25" W x 3.25" W2

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Peak Power: 400 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 6-1/2" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• Mounting clamp for Stealth soundbars with 2" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware