Universal-Fit Audio for 1992 Mercury Sable

---

• 12 -Volt Car Battery
• Fits in many Domestic, Japanese and European vehicle models
• Fits on Jeep, Chrysler, Bentley, Nissan and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• 12-volt Powersports Absorbed Glass Mat (AGM) Battery
• Sealed and non-spillable Absorbed Glass Mat (AGM) design
• Fits JIS battery type BTX9-BS applications
• Factory activated ready for use
• Cranking Amps: 125 amps

• 20 square feet tri-layer sound deadening kit
• Made with butyl rubber, aluminum foil, and foam
• Material Used: Vibration Dampener
• Material Thickness: 1/8"
• Install Location: Entire Vehicle
• Pack includes five 18" x 32" sheets

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• SoloKon Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-1/8"
• Sensitivity: 86.54 dB

• 12 -Volt Car Battery
• Fits in many Domestic and Japanese vehicle models
• Fits on Dodge, Chrysler, Mitsubishi, Honda, and more
• Lithium Titanate Oxide (LTO) battery
• Includes M6 terminal hardware
• Extremely lightweight design

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.000"
• Color: Black

• Made with heavy-gauge steel
• Box is universal
• High quality at an affordable price
• Bottom of the boxes have predrilled flanges

• In-Dash Knockout Panel
• Adds USB Ports
• Installs in Dash

• 7-Pack
• Vehicle Specific Mirror Brackets
• Works Exclusively with the Crimestopper Mirrors with 4.3" and 7" LCD Screens

• Bi-color white and amber LEDs
• 16 self-controlled patterns with memory that can be synced with multiple units (of the same lighting model)
• IP Rating: IP65
• (6) 3-Watt LEDs

• 1" diaphragm for all Pro Mobile tweeters
• Applicable for models: P1T, P175T, P1SRT
• Does not fit Cerwin Vega P75T and P5T tweeters
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• Video cable extension
• Designed for STZ-RF200WD

• Male-female RGB solder connectors with heat sink
• Use with Stinger ENLIGHT10 and Race Sport COLORTRAIL LED Strip lights
• 8 Pack (4 male / 4 female)

• 8" Marine Subwoofer Grille
• Black SW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• White SW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• Black XW grille design
• REVO 8 FA marine subwoofers sold separately

• 8" Marine Subwoofer Grille
• White XW grille design
• REVO 8 FA marine subwoofers sold separately

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Anthracite

• 100 feet 4 gauge Power Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Silver
• 2058 strands with flexible PVC insulation

• Marine stereo AM/FM antenna with flexible mast
• Includes 180° swivel base and 54" antenna cable
• Made with durable steel and corrosion-resistant rubber cover

• Boss Audio flag for select LED whips
• Ideal for electric scooter, bikes, scooters, ATVs and more
• Designed for Boss Audio LED whips (Sold separately)

• 10" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• 12-Volt Car and Powersports Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Includes M6 terminal hardware
• Extremely lightweight design
• Can be mounted in the cabin or under the hood

• 13.12 feet (4 meter) extension cable for MSLC LED Controller
• Moves MSLC controller to another installation site
• Can be used as a replacement cable for MSLC
• Plug and play connection

• 12/10 Gauge Heat Shrink Connectors
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 12/10
• Color: Yellow
• Count: 100

• Audio Signal Booster
• 2 channels, separately adjustable
• 2 male RCA input, 2 female RCA output
• Plug and play connection

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6.5"
• Sensitivity: 84.22 dB

• Marine Black Box LED Lighting Controller
• 4 Independent marine lighting zones
• Powers up to 500 watts of LED lights
• Wet Sounds WS-MC-1 marine media receiver required, sold separately
• Operating Voltage: 10-30 volts DC

• Wired Bass Remote Controller
• Compatible with AudioControl LC8i, DQ61, DQ/DX and The Epicenter processors
• Dash-mountable installation
• Color: Black

• RGB RF Music Controller with Touch Activated Remote
• 6 multi-color modes and 5 music-lighting control modes
• Touch sensitive color wheel for color selection
• Working Voltage: 12-24V DC
• Receiver Range: 20-30 meters

• Polaris Ride Command Audio Adapter
• Compatible with select Polaris RZR, Ranger and General models
• Retains the factory Ride Command as source unit
• Utilizes built-in crossovers from Ride Command
• Harness plugs in to any amp (AMP-1, AMP-2, AMP-3) with RCA inputs

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Rubber Surround
• Mount depth: 6.89"
• Sensitivity: 82.7 dB

• 2.5” (6.35cm) full-color LCD display
• Controls most KMC5 functions
• Water-resistant IP67 rating
•Includes snap-on trim ring (removable)

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• Paper Cone
• Foam Surround
• Mount depth: 3.79"
• Sensitivity: 81.5 dB

• 4 Gauge Power and Signal Installation Kit
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
• FULL Spec Cable Meets or Exceeds AWG (American Wire Gauge) Requirements
• Includes Appropriate Wire Termination Hardware

• 8" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• 1.28” Polycarbonate Pro Audio Tweeters
• 74 watts Peak Each
• 37 watts RMS Each
• 4 ohm Impedance

• Backup Camera Monitor
• Auto video detection, camera priority
• Monitor Screen Size: 4.3"
• Monitor Screen Type: TFT LCD

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Stainless Hardware
• Two Channel

• Peak Power: 1000 watts
• RMS Power: 250-500 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB

• Mini ANL Fuse
• 40 Amp Rating
• Designed for Optimal Signal Transfer
• Package Includes 2 Fuses

• 600W Single 10" Vented Subwoofer Enclosure
• 10" W6 Series Subwoofer
• 5/8" Medium Density Fiberboard with High-grade Automotive Carpet
• 2 Screw Terminals
• Enclosure Dimensions: 21-3/4" D x 12-1/4" W x 14" H

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• 2-Position All-in-One Distribution Block
• (1) 1/0 AWG Positive input (1) 1/0 AWG Negative input
• 2) 4/8 AWG Positive outputs (2) 4/8 AWG Negative outputs

• 3.7M and 2.0M Recording
• 2 Megapixel Recording (rear cam)
• 2" LCD Display (front cam only)
• Integrated GPS system
• IP67 waterproof rating (rear cam only)

• 1400 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 3600 watts x 1 channel @ 1 ohm
• Total Peak Power: 5000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 3" Pro-Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• 1/0 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 4000 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Wire Gauge Reducer
• 0 AWG to 4 AWG
• Nickel Plated
• Deep Wire Recesses
• Ultimate Power Delivery

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• 12" XS-style stainless steel grilles for REV 12 HD tower speakers
• Made with rugged plastic and stainless steel inlay
• Includes (2) speaker grilles and (8) allen head screws

• 4 Gauge 6000 Series Complete Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1750 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• 12" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Wired Remote Bass Level Control

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 4000 - 5500 watt car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 9.9 lbs.

• 4 Gauge 4000 Series Power & Signal Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• 2-Channel RCA Interconnect Cables
• Pre-Terminated Power Connections
• Tru-Spec Wires

• 100 watts x 2 channel @ 4 ohm
• 150 watts x 2 channel @ 2 ohm
• Bridged: 300 watts x 1 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier