Universal-Fit Audio for 2000 Mazda B3000

---

• Peak Power: 3000 watts
• RMS Power: 1500 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Foam Surround
• Mount depth: 8.11"
• Sensitivity: 82.5 dB

• 50 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 8 Gauge Amplifier Installation Kit
• Includes RCA Interconnect Cables
• Made from 100% Pure Crystal-Oxygen Free Copper
• Includes Wire Termination Hardware
• CEA-2015 Compliant

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• Rubber Surround
• Mount depth: 4.76"
• Sensitivity: 83 dB

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 4 Gauge Dual Amplifier Installation Power Kit
• Designed for Systems Ranging from 300W to 700W
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction

• Universal Rear View Backup Camera
• HDR (High Dynamic Range) technology
• Mounting Style: Multiple Mounting Options
• Viewing Angle: 131˚ horizontal, 103˚ vertical
• Resolution: 1280 x 720  (1-3/7" CMOS image sensor)
• Waterproof: Yes (IP67 water and dust proof)

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performanc

• Replacement LED headlight bulbs
• Good for tight applications
• Compact design doesn’t compromise performance
• Output of 6,000 lumens of cool white (6500K) illumination
• HP13 LED Single Beam
• Sold as a Pair

• RMS Power: 650 Watts
• 2.5” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 124 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Includes Amplifier Wiring Kit

• Works with select SoundExtreme speaker systems
• Designed for marine and outdoor environments
• Play/Pause/Track Buttons
• Control volume, track selection, power as well as LED light scenes.

• RMS Power: 400 - 800 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 7-15/16"

• Adapter for AR or DSP harness to RCA
• Includes 16 ft. cable for remote installation of the amplifier
• Includes 11" RCA adapter harness

• 70 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Sealed enclosure with 2 12" Solo-Baric L7T Series Subwoofer
• 1200 watts RMS Power
• Final Impedance: 2-ohm
• Dimensions: 38-3/16" L x 8-1/4" H x 17-1/8" W

• Universal empty 6.5" roll-bar and golf-cart speaker pods
• 2.5" black powder coated aluminum clamp with 360 degree rotation
• Locking set screw between the clamp and mount
• Water-tight speaker wire grommet
• Constructed of 1/4" durable and UV protected HDPE

• 12-volt Automotive Absorbed Glass Mat (AGM) Battery
• Sealed Absorbed Glass Mat (AGM) design
• Perfect for 2400 watts car audio stereo systems
• Can be mounted in any position
• Can be fully discharged and re-charged

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

• Water Resistant Speaker Plugs
• Male and Female Plugs included
• 18 Gauge Input

• IPX7 rated Deutsch™ / Amphenol™ Element Ready™ connectors
• Controller illuminates up to 8 Color Optix™ speakers and/or subwoofers

• 120 watts x 4 channel @ 4 ohm
• 180 watts x 4 channel @ 2 ohm
• Bridged: 360 watts x 2 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 4 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1750 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 1-ohm
• CA glue adhesive is NOT included

• 12" Dual Ported Subwoofer Enclosure
• Medium Density Fiberboard (MDF) construction
• Total box volume: 6 cubic feet
• Designed for 12" SoloX subwoofers
• Optimized for dual SoloX maximum performance

• PRO Series ANL Fuse Holder
• Accepts Any 5/16" Ring Terminal
• Ultimate Power ANL Fuse Protection
• Corrosion Resistant Shoc-Krome-Plated
• Protective Cover Included

• 31-Band graphic EQ
• 6 Inputs, 10 individually assignable outputs
• Complete tuning control via Bluetooth
• Retains voice prompts, parking sensor chimes, and more
• Works with wide range of vehicle application systems

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.90"
• Sensitivity: 85 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Composite Fiber cone
• Rubber surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Sensitivity: 86 dB

• 5 Meters
• 2 Channel RCA
• Audio Interconnect Cable
• 16.4 Foot Length

• Waterproof 7-function touch keypad Bluetooth receiver and controller
• Play and stream digital music or radio
• Complete wireless connection with Bluetooth 4.0
• Water resistant touch keypad
• 1" mounting hole depth diameter
• Mounting hardware and accessories included

• Universal 3/8" trim ring
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.625"

• 20' Power Cable Included
• Mounts Using Built-On Bracket
• Brings Controls Closer to You
• Compatiable with a Range of Products

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• UV-treated Non-Pressed Paper cone
• Pressed Foam surround
• Mount depth: 6.34"
• Sensitivity: 87.5 dB

• I-BAR Side and Top Terminal Adapter Kit
• Mounts to Any i-BAR Compatible Battery
• Provides GM Style Threaded Side Post Terminals
• Brass Coated Battery Post Material

• Provide maximum current transfer
• Chrome finish
• Deep wire recesses
• Oversized set screws
•

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 1” Aluminum Pro Audio Marine Horn Tweeter Kit
• 800 watts Peak Each
• 200 watts RMS Each
• 4 ohm Impedance

• 5 Meters
• 6 Channel RCA
• Audio Interconnect Cable
• 16.4 Foot Length

• 50 watts x 8 channel @ 4 ohm
• 100 watts x 8 channel @ 2 ohm
• Bridged: 200 watts x 4 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 8-Channel Amplifier

• 3400 watts x 1 channel @ 4 ohm
• 4950 watts x 1 channel @ 2 ohm
• 5000 watts x 1 channel @ 1 ohm
• Total RMS Power: 5000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Paper Cone
• Foam Surround
• Mount depth: 5.250"
• Sensitivity: 85.4 dB

• 1-Channel Line Out Converter
• Designed to integrate with aftermarket or factory OEM systems
• Maximum Input: 45 watts

• Shielded noise-rejecting coaxial construction
• Heavy gauge OFC conductors ensure superior sound quality
• Silver-Plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers

• FAKRA to Female RCA Adaptor
• Color coded connectors
• Plastic housing for added protection
• Complete plug and play connection

• Oversized OFC conductors provide excellent sound quality
• Continuous connection construction (C3 Tech) provides unmatched signal transfer
• Mylar shielding for increased noise rejection
• Split-tip machined metal connector allows better signal transfer
• Twisted pair winding patterns improve clarity and broaden dynamic range
•Compact connector design for easy installation

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• 50 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 2X 1/0-4 gauge input and 4X 1/0-4 gauge output distribution block
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Output Gauge Size: 1/0 AWG
• Total Number of Inputs: 2
• Total Number of Outputs: 4
• Compatible with power and ground
• Nickel Plated Material

• 4-Channel 4000 Series RCA Interconnect Cables
• 12 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 1/2 inch
• polyoefin
• 4 feet