Universal-Fit Audio for 2001 Mitsubishi Eclipse

---

• 1.0 Farad Power Capacitor
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• 230 watts x 2 channel @ 4 ohm
• 480 watts x 2 channel @ 2 ohm
• 700 watts x 2 channel @ 1 ohm
• Bridged: 960 watts x 1 channel @ 4 ohm
• 14000 watts @ 2 ohm
• Total RMS Power: 700 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier

• Upgrade Your Factory Power and Ground Wire
• Perfect for Dealing with Dimming Lights
• Improve the Efficiency of Your Vehicle's Electrical System
• Use for Systems 350A or Less
• Includes All Necessary Wiring
• Ring Terminals are Pre-Connected to Power and Ground Wire

• Universal Double-DIN trim rings
• For Double-DIN radio installations

• 800 watts x 1 channel @ 4 ohm
• 1350 watts x 1 channel @ 2 ohm
• 1700 watts x 1 channel @ 1 ohm
• Total RMS Power: 1700 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 1-Way Remote Start, Keyless Entry and Car Alarm System
• Includes (2) 4-button LED remote control transmitter
• 1/4 mile (1320 ft) range
• Antenna with integrated valet switch and LED

• 9 Conductor 18 Gauge Speaker Wire
• Nine Cables In One
• Flexible Jacketing • Ideal For 4-Channel Amplifiers
• Easy Installation

• Active 2-channel bass restoration processor
• Parametric Bass Controls
• Up to 9.5 Volts of output
• Load selection switch (20, 60, or 20K ohm)
• Remote bass level control included
• Preamp and speaker-level inputs
• Auto turn-on
• LED Clip indicator

• NVX Remote Level Controller with Digital Voltmeter
• Can adjust the amplifier gain even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Blue LED display (high voltage / low voltage)

• 12" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• RMS Power: 200 watts
• Impedance: Single 4 ohm
• Injection Molded Polypropylene Cone
• Synthetic Rubber Surround
• Mount depth: 5.07"
• Sensitivity: 86.8 dB

• Peak Power: 300 watts
• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 4-11/16"
• Sensitivity: 84.9 dB

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• 420 watts x 1 channel @ 4 ohm
• 760 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Wired Bass Remote Controller
• Compatible with Alpine amplifiers
• Dash-mountable installation
• Variable Gain Control: 0 to -12 dB
• Color: Black

• 150A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 100 watts x 6 channel @ 4 ohm
• 150 watts x 6 channel @ 2 ohm
• Bridged: 300 watts x 3 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Works with power wire 8 gauge to 1/0 gauge
• Great for positive or negative connections to your battery
• Forged and machined 360 brass connection
• Elements and set screws have marine-grade, anti-corrosive Stannum plating

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 4.92"
• Sensitivity: 85 dB

• 3.5 mm to 3.5 mm Headphone Audio Splitter
• Allows for two people to listen to one audio source at once
• Length: 4.56" / 0.38 ft

• Ported enclosure with 4 12" Solo-Baric L7R Series Subwoofer
• 2400 watts RMS (4800 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 28" L x 20-1/4" H x 35-7/8" W

• Universal Wired Bass Remote
• Multiple mounting options
• Features stereo RCA input and output
• No additional wiring needed for installation

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Peak Power: 1300 watts
• RMS Power: 350 watts
• Impedance: Single 4 ohm
• IMPP - Aramid Fiber and Carbon Fiber Cone
• Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 76 dB

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• RMS Power: 700 watts
• Impedance: Single 4 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 83.7199 dB

• 50 feet 1/0 gauge Power Wire
• CCA (Copper-Clad Aluminum) material
• Ultra flexible CCA cable construction
• Color: Matte Blue

• Converts differential video signal to a single-ended composite video signal
• Improves display of OE camera on the aftermarket radio
• Reduces/eliminates video noise
• Two-wire power connection for simple installation
• Great for Ford and Chrysler vehicles and many more

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

• 5 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 100A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 4 band-Band Parametric Marine Equalizer
• 3-zone controller with 2 separate equalizers for tower and cabin zones
• Main input, Auxiliary input, or Bluetooth input
• Master, in-boat and tower zones, and subwoofer volumes
• Includes a talkback microphone for PA communications

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• Original StickyCup silicone suction windshield mount
• Compatible with Escort radar detectors
• Small and reliable mounting suction with strong adhesion
• Easy release tab ensures strong suction to the windshield

• 1” Aluminum Pro Audio Horn Tweeter
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• 10" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2 cubic feet
• Compatible for Sundown SA10V2 and similar subwoofers (Sold separately)

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 80.6 dB

• JL Audio Tower Speaker Mounting Kit
• Clamp is intended for Surface/deck Mounting and Four Winns mounting only
• For M-Series and MX-Series JL Audio Tower Speakers

• Single or Multi-Tone Siren
• Six Tone Siren
• 20 watt Output

• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB

• Door Lock Relay Module with Resistors DEI 451M
• Compatible with most Directed Electronics systems
• 3-Pin Plug Interface with DEI system
• Will interface with most electric power door lock systems drawing 30A or less

• 3.0 Farad Digital Capacitor
• Voltage Meter
• Impact Resistant Polycarbonate Cover
• Simple Mounting System

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Spade Terminals
• 10 Gauge • 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Computer-designed CNC cut

• 10" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.50 cubic feet
• Premium Black Carpet with Black NVX Logo

• 5-pin RGBW Hardwire Pigtail Adapter
• Designed for use with RGBW-CB1 controller (Sold separately)
• Cable Length: 6 inches

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• 6.5" Speaker grilles for Infinity REF607F
• Black steel mesh grille design
• Includes plastic trim rings and Infinity logo on grilles
• Will be shipped in a brown box