Universal-Fit Audio for 2003 Mazda B2300

---

• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories

• Peak Power: 2400 watts
• RMS Power: 1200 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 7.02"
• Sensitivity: 85 dB (1W/1m)

• OEM Alarm Shock Sensor Upgrade Kit
• Allows factory alarm systems to detect impacts to the vehicle
• Designed to interface for factory alarms extra sensor input

• Specifically developed for Hertz MP 70.3 and Hertz MP25.3
• Two-position (0 / +2 dB) switch for tweeter level adjustments
• Pure copper wire low series resistance inductors

• 8.3 Megapixel Recording (front cam)
• 3.7 Megapixel Recording (rear cam)
• 3.0" LCD Display (front cam only)
• Integrated GPS system
• Touch panel control

• Ported enclosure with 4 12" Solo-Baric L7R Series Subwoofer
• 2400 watts RMS (4800 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 28" L x 20-1/4" H x 35-7/8" W

• 230 watts x 2 channel @ 4 ohm
• 480 watts x 2 channel @ 2 ohm
• 700 watts x 2 channel @ 1 ohm
• Bridged: 960 watts x 1 channel @ 4 ohm
• 14000 watts @ 2 ohm
• Total RMS Power: 700 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier

• Designed to connect in-dash receiver wiring harness to vehicle wiring harness

• 12" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

• 1-Way Remote Start, Keyless Entry and Car Alarm System
• Includes (2) 4-button LED remote control transmitter
• 1/4 mile (1320 ft) range
• Antenna with integrated valet switch and LED

• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Peak Power: 700 watts
• RMS Power: 500 watts
• Impedance: Single 2 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 82.2488 dB

• 420 watts x 2 channel @ 4 ohm
• 630 watts x 2 channel @ 2 ohm
• Bridged: 1260 watts x 1 channel @ 4 ohm
• Total RMS Power: 1260 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• USB/AUX input
• 6-foot cable
• front-mounted USB-A port and 3.5mm aux input
• 1" mounting hole required
•Easy screw in style installation

• Single Knob Surface Mount Housing Pod
• For use with Belva BAWLK, BA2USB or BAVTM

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 5/6-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 1.75 cubic feet
• Compatible for Sundown SA12V2 subwoofers (Sold separately)

• 800 watts x 1 channel @ 4 ohm
• 1350 watts x 1 channel @ 2 ohm
• 1700 watts x 1 channel @ 1 ohm
• Total RMS Power: 1700 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Control volume, switch sources and zones
• Backlit rubber buttons
• IPX7-rated for water resistance
• Gauge mount style
• Works with NVX VMPS35

• 1 input for 2 output video signal splitter
• Hard aluminum body to protect the device
• Filters out incoming noises
• Small and compact size

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• RMS Power: 700 watts
• Impedance: Single 4 ohm
• Paper Fiber with Mica Coating Cone
• Rubber Surround
• Mount depth: 5.32"
• Sensitivity: 83.7199 dB

• 80A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• 10" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.50 cubic feet
• Premium Black Carpet with Black NVX Logo

• Allows aftermarket actuators to work with cable door lock systems
• Each kit operates two doors
• Does not include actuators
• Includes module, wiring harness and installation guide

• 9 Conductor 18 Gauge Speaker Wire
• Nine Cables In One
• Flexible Jacketing • Ideal For 4-Channel Amplifiers
• Easy Installation

• Surface Mount Flange for use with BAWPL, BA2USB, BAVTM

• Original StickyCup silicone suction windshield mount
• Compatible with Escort radar detectors
• Small and reliable mounting suction with strong adhesion
• Easy release tab ensures strong suction to the windshield

• Remote Controller with Fast Charge USB for inverters
• Built-in bright blue backlit LCD text display
• Compatible with select Cobra inverters
• Features 4 mounting options
• Mounting hardware included

• Peak Power: 300 watts
• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 4-11/16"
• Sensitivity: 84.9 dB

• 75 Amp Power Supply
• Built-In 4 Stage Smart Charger
• Overtemp Protection
• Deck Mounted Converter
• Max Output: 1065 Watts

• 200-Amp continuous / 300-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• Modified Sine Professional Grade Power Inverter
• 3000 watts RMS, 6000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design
• Remote controller LCD included

• 10 farad Hybrid Digital Capacitor
• Increases quality of sound
• Increases level of bass
• Platinum plated

• RMS Power: 200 watts
• Impedance: Single 4 ohm
• Injection Molded Polypropylene Cone
• Synthetic Rubber Surround
• Mount depth: 5.07"
• Sensitivity: 86.8 dB

• 150 watts x 6 channel + 250 watts x 2 channels @ 4 ohm
• 225 watts x 6 channel + 400 watts x 2 channels @ 2 ohm
• Bridged: 450 watts x 3 channel + 850 watts x 1 channel @ 4 ohm
• Total RMS Power: 2200 watts
• Class D 2 ohm Stable 8-Channel Amplifier

• Low Profile Ported Subwoofer System
• 200 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 1-Way Remote Car Starter
• 5-Button LED Transmitter
• 1500 feet of range (0.28 miles)
• Dual 2-way data port
• Multi-vehicle functionality