Universal-Fit Audio for 2005 Cadillac STS

---

• Bluetooth Profile: A2DP (High-Quality, Stereo Audio)
• Bluetooth Core Specification: Version 4.0 with aptX
• Outputs One Stereo Pair, Low-Level RCA Plugs
• Output Voltage: 2V RMS
• Signal to Noise Ratio: 93 dB (20 Hz - 20 kHz)
• Input Operating Voltage: 8 - 28 VDC

• 1000 watts x 1 channel @ 4 ohm
• 2000 watts x 1 channel @ 2 ohm
• 4000 watts x 1 channel @ 1 ohm
• Total Peak Power: 4000 watts
• Class D 1 ohm Stable Monoblock

• 12" SoloX Series Dual 1-ohm Recone Kit
• Pre-assembled cone, surround, and voice coil
• Impedance: Dual 1-ohm
• Alignment shims are included for installation

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 8 11/16"
• Sensitivity: 88.56 dB

• Waterproof 7-function touch keypad Bluetooth receiver and controller
• Play and stream digital music or radio
• Complete wireless connection with Bluetooth 4.0
• Water resistant touch keypad
• 1" mounting hole depth diameter
• Mounting hardware and accessories included

• 1200 Watt Amplifier Wiring Kit
• 1pc ANL Fuse holder
• Ultra Flexible Speaker Wire
• For Installing 2-Channel Amplifier

• 1” Street Series Pro-Audio Loaded-Horn Bullet Tweeter
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• UV-treated Non-Pressed Paper cone
• Pressed Foam surround
• Mount depth: 6.34"
• Sensitivity: 87.5 dB

• 10" Amplified Loaded Subwoofer System
• 300 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.0"
• Sensitivity: 87 dB

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance

• 500 watts x 2 channel @ 4 ohm
• 1000 watts x 2 channel @ 2 ohm
• Bridged: 2000 watts x 1 channel @ 4 ohm
• Total Peak Power: 2000 watts
• Class A/B 2 ohm Stable 2-Channel Amplifier

• USB / HDMI / Auxiliary Replacement Panel
• Replaces the factory USB and auxiliary panel
• Compatible with 2011-2014 Ford Edge

• Mercury Tilt Switch
• Detects Open Zones
• Waterproof Design
• Adjustable Angle

• Subwoofer Grille for Kicker Comp and Solo Classic Series
• Protects Exposed Subwoofer
• Easy Installation
• Black Metallic Finish

• 10" Amplified Loaded Subwoofer System
• 500 watts Peak
• Built-In Class D amplifier
• Variable Bass Boost
• Wired remote bass level controller

• Compatible with All NXL-X & CF-X Series Hydro Towers
• Extra Heavy Duty Pole Clamp
• Fits Towers 2.25", 2.5", 2.75" and 3"
• Color: Black

• NMEA 2000-certified remote/repeater
• 2.6” monochrome LCD screen
• IPx7 waterproof rating
• Multi‐Zone technology
• Plug-and-play setup

• 8" Single Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium black carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.51 cubic feet

• 200 watts x 4 channel @ 4 ohm
• 350 watts x 4 channel @ 2 ohm
• Bridged: 650 watts x 2 channel @ 4 ohm
• Total RMS Power: 1400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 18 Ft (5.49 m) Core Series 4 Channel Audio Interconnect Cable
• Pure Oxygen Free Copper Conductors With Polyethylene Dielectrics
• Molded Connector Bodies For Extended Durability
• Length: 18 Ft (5.49 M)

• 20 square feet tri-layer sound deadening kit
• Made with butyl rubber, aluminum foil, and foam
• Material Used: Vibration Dampener
• Material Thickness: 1/8"
• Install Location: Entire Vehicle
• Pack includes five 18" x 32" sheets

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Aluminum Cone
• Nitrile Butadiene Rubber NBR Surround
• Impedance: Single 2 ohm
• Mount depth: 7.87"
• Sensitivity: 86.4 dB

• 75 Watts Peak x 4 + 100 Watts x 1 @ 4 ohm
• 150 Watts Peak x 4 + 200 Watts x 1 @ 2 ohm
• Total Peak Power: 1000 Watts
• CEA-2006 Compliant
• NMMA Certified
• Audiophile Marine Standard
• LED system protection circuit diagnostics
• Class SQ & Class Q1

• 6 ft (1.83m) Marine Audio 2-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• Peak Power: 3000 watts
• RMS Power: 1500 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.07"
• Sensitivity: 86.20 dB

• Universal License Plate-Mount Rear View Backup Camera
• Mounting Style: Top of License Plate Frame
• Horizontal Viewing Angle: 180-degrees horizontal
• Vertical Viewing Angle: 105-degrees horizontal
• Resolution: 1280 x 720 
• Waterproof: Yes
• Nightvision:

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 11-9/16"

• Wired Bass Remote Controller
• For the BassPro SL and BassLink SM Compact Subwoofer
• Control the bass/subwoofer levels from the vehicle’s front seat

• 1-Channel Line Out Converter
• Designed to integrate with aftermarket or factory OEM systems
• Maximum Input: 45 watts

• 4-Channel 4000 Series RCA Interconnect Cables
• 12 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket

• Underglow Chase Kit UTV, ATV, Golfcart
• Includes 6 sealed LED tubes, mounting hardware, and connect chasing controller
• Water-resistant Heise connector
• Includes Pro Controller, RF card remote

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohm
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Multi-Stage Charging
• Output Display
• Internal Cooling Fan
• Voltage Monitoring

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• Measures noise level in the entire audible range
• Defining the harmonic distortion coefficient
• Frequency range from 10 to 20,000 Hz
• Amplitude range from 80 to 150 dB
• Wide dynamic range of 70 dB
• Audio tracks for tuning (sine, sweep-tones, noise)
• Spl-Lab Measuring Center software for Windows and Android

• Fuse holder bracket for select 2018-Up Jeep
• Can be used with alternate fuse holders
• Includes parts and mounting hardware

• 8" Black replacement antenna mast
• Fits into the original antenna location for AM/FM stations
• Easy removable mast design
• Includes 12 adapters to fit stereo connections

• 8" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Upgrade Your Factory Power and Ground Wire
• Perfect for Dealing with Dimming Lights
• Improve the Efficiency of Your Vehicle's Electrical System
• Use for Systems 350A or Less
• Includes All Necessary Wiring
• Ring Terminals are Pre-Connected to Power and Ground Wire

• 12" Single Sealed Shallow Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Ultra slim and shallow enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.62 cubic feet

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 6.43"
• Sensitivity: 84.6 dB

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Composite Fiber cone
• Rubber surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• RMS Power: 400 - 800 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 7-15/16"

• 2-Channel 8000 Series RCA Y-Adapter Cable
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• 2 Females to 1 Male

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 750 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 4 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 12" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers