Universal-Fit Audio for 2011 GMC Yukon

---

• 50 watts x 8 channel + 80 watts x 4 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 4 ohm Stable 12-Channel Digital Sound Processor Amplifier
• High-resolution (Hi-Res) audio playback
• Selectable pre-configured sound system configurations
• Embedded RTA signals for customized sound tuning
• Bluetooth audio streaming with included external module

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• Mounting clamp for Stealth soundbars with 0.75" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 600W Peak
• 300W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 200-Amp continuous / 300-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16V DC operating range

• Media Master Remote controller cable
• 25-foot Extension Cable

• 1/0 gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 4000 watts
• Stinger SHD201 water-resistant ANL fuse holder included

• Waterproof 3.5 mm Flush mount Aux Input
• Extend Existing AUX Input to a Remote Location
• Durable Rubber Cover
• Waterproof for Marine Applications
• For Audio Only

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 15" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.10 cubic feet
• Premium Black Carpet with Black NVX Logo

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 16mm (5/8") mounting hole size
• Red LED illuminated ring

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Pressed Paper cone
• Pressed Foam surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 8" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .75 cubic feet
• Premium Black Carpet with Black NVX Logo

• RGB LED light ring (single)
• 16 differnet colors
• designed for 10" MB Quart's Nautic marine speakers
• Effect modes including Flash, Strobe, Fade, and Smooth
• Dimensions: Inside diameter: 5.85" x 8.7", Outside diameter: 6.85" x 9.7"

• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 5/6-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.250"
• Color: Black

• Talk-back microphone with adjustable microphone gain
• Made for use in the outdoors, marine, and powersports use
• Equipped with RCA input and line out connections
• Can be used with Wet Sounds microphones
• Mounting hardware accessories included

• Marine stereo AM/FM antenna with flexible mast
• Includes 180° swivel base and 54" antenna cable
• Made with durable steel and corrosion-resistant rubber cover

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Compatible for Sundown SA 15V2 subwoofers (Sold separately)

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• 50 watts x 2 channel @ 4 ohm
• 100 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• Material: 0.75" MDF
• Inner Diameter: 5.85"
• Outer Diameter: 7.5"

• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

• Mounting clamp for Stealth soundbars with 1.5" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• Wired marine remote control without display
• Compatible with select Clarion stereos
• Easily adds up to 3 remotes
• IP67-rated water resistant design

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Empty Dual 6.5" Speakers and Single DIN Radio Overhead Console Enclosure
• Durable ABS plastic construction and matte black finish
• Paintable for custom installation
• Water-resistant design

• Digital LED lights Bluetooth controller
• IOS and Android Compatible via DS18 LC App
• Bluetooth supports 100 ft. range
• IP66 marine rated; withstands harsh environment

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.5 cubic feet
• High-output XXL enclosure with double flush baffle

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.65"
• Sensitivity: 87.15 dB

• 1/0 AQWG Fuse Holder
• Lok-Nut style fasteners
• Water resistant

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Pressed Foam Surround
• Mount depth: 4.98"
• Sensitivity: 82.4 dB

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• NVX Remote Level Controller with Digital Voltmeter
• Can adjust the amplifier gain even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Blue LED display (high voltage / low voltage)

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• 12" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet