Universal-Fit Audio for 2011 Nissan Juke

---

• Cast Aluminum Wakeboard Tower Speaker Clamps
• Marine Grade
• 360° rotational mounting capability for unlimited flexibility
• Fits PM2652W-MB and RM1652W-MB
• Quick release design for security and cleaning
• Accomodates 1" to 2" Diameter Tubing

• 875 watts x 1 channel @ 4 ohm
• 1750 watts x 1 channel @ 2 ohm
• 3500 watts x 1 channel @ 1 ohm
• Total Peak Power: 3500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 4 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.6 dB

• Wireless CB radio with digital noise cancellation
• 4 watts maximum power output
• 40 CB full channel coverage
• Dual-mode communication on AM/FM on all 40 channels
• Auto squelch control blocks noise
• Instant emergency channel 9 and information channel 19

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• 50 watts x 2 channel @ 4 ohm
• 100 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 10" Single Truck Large Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.51 cubic feet

• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet

• 12" Dual Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.69 cubic feet

• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

• 3.5mm to RCA
•Twisted Pair Interconnect
• 3 FT Long

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Ring Terminals
• 3/8" Opening
• 4 Gauge
• 3 Red & 2 Black
• Nickel Plated
• Resealable Polybag

• NVX Remote Level Controller with Digital Voltmeter
• Can adjust the amplifier gain even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Blue LED display (high voltage / low voltage)

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• Dual terminal cups for high power speaker systems and enclosure
• Utilizes four large brass-lug terminals made for up to 8AWG wire
• Compatible for high power speaker system
• High power handling
• Non-conductive acorn protection cover included

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Pressed Foam Surround
• Mount depth: 4.98"
• Sensitivity: 82.4 dB

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3 cubic feet
• Compatible for Sundown SA 15V2 subwoofers (Sold separately)

• RMS Power: 500 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 5.93"
• Sensitivity: 84.87 dB

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.00"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Two window Kit
• Intelligent safety sensor

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.250"
• Color: Black