Amplifiers for Powering a Sub for 2017 Audi S3

---

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• 4 ohm: 325 Watts x 1 chan. / 2 ohm: 600 Watts x 1 chan. / 1 ohm: 1200 Watts x 1 chan.
• Total power output: 1200 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz
• Includes Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

• Variable Electronic Crossover
• Bass Remote Included
• Subsonic Filter
• Switchable Bass Boost

• 500 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
• Includes Amplifier Wiring Kit

• 500 Watt True RMS Output
• Marine Certified Monoblock Micro Class D Amplifier
• 180W x 1-Chan. @ 4 ohm
• 320W x 1-Chan. @ 2 ohm
• 500W x 1-Chan. @ 1 ohm
• Extremely Small Footprint
• Includes Amplifier Wiring Kit

• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit

• 250 watts x 1 channel @ 4 ohm
• 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Top-Mounted LCD Panel for Tuning
• Includes Amplifier Wiring Kit

• 100 Watts Max x 1 @ 4 ohm
• 2000 Watts Max x 1 @ 2 ohm
• 4000 Watts Max x 1 @ 1 ohm
• Total Max Power: 4000 watts Watts
• 96dB Signal to noise ratio
• Includes Amplifier Wiring Kit

• 200 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• Rockford Fosgate R500X1D 500W RMS Prime Monoblock Amplifier
• Belva BAK42 Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Belva BB1D 1.0 Farad Capacitor
• RMS: 500W x 1 @ 2 ohm
• Premium Power and Ground Wire Provides Optimal Power Transfer

• 490 watts x 1 channel @ 4 ohm
• 780 watts x 1 channel @ 2 ohm
• 1300 watts x 1 channel @ 1 ohm
• Total RMS Power: 1300 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Includes Remote bass knob
• Includes Amplifier Wiring Kit

• RMS: 500W x 1 @ 4 ohm, 800W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2400W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB
• Class D Circuitry
• Includes Amplifier Wiring Kit
• Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H

• PM100X1K
• Punch Marine 100 Watt Full-Range Mono Amplifier (pair)
• Number of Channels: 1
• Frequency Response: 60Hz - 20kHz +/- 1.0dB
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

• 500 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• Total RMS Power: 750 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 250 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• 750 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 500 Watts
• CEA-2006 Compliant • Rollback Protection

• Vega Series Class D Mono 600W Amplifier
• RMS Power: 400W x 1 @ 2 Ohm
• RMS Power: 240W x 1 @ 4 Ohm
• MAX Power: 600W x 1 @ 1 Ohm
• Surface Mount Component Technology
• Compact Universal All-Weather Application
• Variable/Switchable Crossovers On Multi-Channel Models

• 700 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• CEA-2006 Compliant
• Class D 1 ohm Stable Monoblock Amplifier

• 500 Watts RMS x 1 @ 4 ohm
• 750 Watts RMS x 1 @ 2 ohm
• 750 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Dual extruded heat sinks
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Real time thermal sensing with Rollback technology
• Dimensions: 4.3"W x 8.3"L x 1.6"H

• 500 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2000 Watts
• CEA-2006 Compliant
• Bass Knob Included
• Aluminum Heatsink
• Dimensions: 12-5/8" W x 6-5/8" L x 2" H

• Class D Amp Technology
• 4 Ohm: 350 Watts RMS x 1
• Compact Size
• Turn-On Mode Switch
• Input Level Control

• 300 Watts x 1 @ 4 ohm
• 500 Watts x 1 @ 2 ohm
• Element Ready™ design protects against outdoor exposure
• Conformal coated circuit board
• Top Mounted Control Panel

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock
• Includes Amplifier Wiring Kit

• Power stack Capable
• CTA-2006 Compliant
• Fits in the open space behind Alpine’s iLX-W650
• 100W x 1 RMS
• 200W x 1 RMS
• 400W x 1 DPP
• Includes Amplifier Wiring Kit

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Amplifier wiring kit included

• 150 watts x 1 channel @ 4 ohm
• 250 watts x 1 channel @ 2 ohm
• Total RMS Power: 250 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 500 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm (Dynamic Power)
• Total RMS Power: 750 watts
• Class BD 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 750 Watts Max x 1 @ 4 ohm
• 1500 Watts Max x 1 @ 2 ohm
• 3000 Watts Max x 1 @ 1 ohm
• Total Max Power: 3000 watts Watts
• 96dB signal to noise ratio

• CVP Series Monoblock Amplifier
• 200W RMS X 1 @ 2Ω / 120W RMS X 1 @ 4Ω
• 1-Ohm Stable Class D Monoblock Operation
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• 200mV-6V High Level or Low Level RCA Input
• Includes Amplifier Wiring Kit

• 150 Watts RMS x 1 @ 4 ohm
• 250 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 250 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Sub Infrasonic Filter: 15 Hz - 40 Hz

• 540 watts x 1 channel @ 4 ohm
• 920 watts x 1 channel @ 2 ohm
• 1480 watts x 1 channel @ 1 ohm
• Total RMS Power: 1480 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Belva BAK42 4 Gauge Amp Wiring Kit

• RMS: 700W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 13-11/16"L x 8-3/16"W x 2-3/16"H
• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• CEA-2006 Compliant
• Top Mounted Control Panel
• Class-D Amplifier
• Includes Amplifier Wiring Kit

• 330 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Class D 2 ohm Stable Monoblock Amplifier

• Class D Amp Technology
• 4 Ohm: 600 Watts RMS x 1
• 2 Ohm: 1000 Watts RMS x 1
• Variable Crossover and Bass Boost
• Turn-On Mode Switch

• 340 watts x 1 channel @ 4 ohm
• 540 watts x 1 channel @ 2 ohm
• 790 watts x 1 channel @ 1 ohm
• Total RMS Power: 790 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 11"L x 7-3/4"W x 2-3/8"H
• Includes Rockford Fosgate RFK4I 4 Gauge 2-Ch Amp Kit

• 500 watts Peak @ 4 ohm
• 1000 watts Peak @ 2 ohm
• 2000 watts Peak @ 1 ohm
• Total Peak Power: 2000 watts
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 650 watts x 1 channel @ 4 ohm
• 1325 watts x 1 channel @ 2 ohm
• Total peak power output: 1325 watts
• Class A/B 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 930 watts x 1 channel @ 4 ohm
• 1860 watts x 1 channel @ 2 ohm
• 3725 watts x 1 channel @ 1 ohm
• Total peak power output: 3725 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 550 watts x 1 channel @ 4 ohm
• 1010 watts x 1 channel @ 2 ohm
• 1600 watts x 1 channel @ 1 ohm
• Total RMS Power: 1600 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 300 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• 800 watts x 1 channel @ 1 ohm
• Total RMS Power: 800 watts
• Class D 1 ohm Stable Monoblock Amplifier (Red)
• Includes Amplifier Wiring Kit

• 350 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 175 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 350 watts x 1 channel @ 4 ohm
• 550 watts x 1 channel @ 2 ohm
• 800 watts x 1 channel @ 1 ohm
• Total RMS Power: 800 watts
• Ultra-compact, high density aluminum alloy chassis provides superior thermal stability
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 350 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• 750W x 1 @ 1 Ohm
• Conformal Coating Protects Against Moisture
• Aluminum Heatsink

• 680 Watts x 1 @ 4 ohm
• 1000 Watts x 1 @ 2 ohm
• N/A @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• Built-in NOMAD Circuit Protects Amplifier
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H

• 200 Watts RMS x 1 @ 4 ohm
• 400 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1600 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• 4.25"W x 7.99"L x1.6 "H
• Includes Amplifier Wiring Kit

• RMS: 150W x 1 @ 4 ohm, 300W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 11"L x 7-3/4"W x 2-3/8"H

• 500 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit
• Class D 1 ohm Stable Monoblock Amplifier

• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• Built-in NOMAD Circuit Protects Amplifier
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H