Universal-Fit Audio for 2019 Lexus IS300

---

• Active 6-Channel Line Driver
• Increase pre-amp signal levels up to 9.5 volts RMS
• Matches the volume levels between different sources
• Two channels of input can drive all six outputs
• Each output can drive up to seven amplifiers

• 7 Meters
• 16 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• ANL/Mini-ANL Fuse Holder
• One 1/0 - 4 Gauge Input
• One 1/0 - 4 Gauge Output
• Solid Brass And Satin Chrome Plated
• High-Temperature Polycarbonate Base And Cover

• 3-Way active crossover with sub-level control
• Mixed input and output
• Level output knob with individual output
• Features front and rear high-pass filters
• Includes remote subwoofer level control
• Stereo or mono subwoofer mode selector

• Load Generating Device and Signal Stabilizers
• Designed for non-amplified Dodge, Chrysler, Jeep and Maserati sound systems
• Generates load and stabilize signal from a non-amplified factory system
• Operating Impedance: 20 ohms

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Replacement Companion Remote Control
• White and Black Design
• 5 Rubberized Buttons
• Super Code 1-Way LE Transmitter
• Confirms the Commands you Send to the Vehicle with Bright LEDs
• Uses the 2016 3V Round Lithium Battery

• Radar and Laser Detector
• Built-in Bluetooth and GPS
• AutoLearn Intelligence feature
• EZ Mag Mount included

• 12" Subwoofer Grille for Rockford Fosgate P2,P3, and P3 Shallow
• Black Gloss Finish
• Mesh Design for Maximum Protection

• Steering wheel control data interface
• Auto-detects the connected stereos
• Works with all stereo brands
• Non-volatile memory retains settings
• Universal fit for most vehicle models

• 1 channel bass restoration processor and line driver
• Original bass maximizer
• ParaBASS controls
• Selectable PFM Subsonic Filter
• Selectable maximum output voltage
• Bass restoration lighted display
• Dual-function remote level control included

• Premium Series Distribution Block
• MAXI Fuses
• 1/0 or 4 AWG Input
• 4 or 8 AWG Outputs
• Nickel Plated • Includes Grommets and Wrenches

• 10" Grille made Specifically for the JL Audio 10W1v2 or 10W3v3 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Under seat amplifier rack for select 2018-Up Jeep models
• Corrosion resistant black powder-coated mount plate
• Designed to be installed under the front seat to install aftermarket amplifier

• 200A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 10" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• 12" Grille made specifically for the JL Audio 12W1v2, 12W3v3, or 12TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Features Qualcomm Quick Charge 3.0
• Charges two devices simultaneously at 5V (2.1A)
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)

• 12" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware

• 6" x 9" Universal Speaker Spacers / Depth Extenders
• Adds 1-1/2" depth to speakers
• Items that make the installer's Life easier
• Trimrings and Trimplates
• Speaker Grills
• Speaker Adapter plates

• Multi-Video Amplifier
• Includes one RCA input and four RCA outputs
• Video level control for each level

• Portable Automatic Smart Lithium High Voltage Maintainer
• Lithium LTO Battery Maintainer 3.5 Amp
• Designed for charging 15 volts batteries
• Shuts off when the battery is charged
• Can be used as a "Maintainer" for all LTO and high voltage lithium batteries

• Universal Antenna Extender
• Extends Antenna 12" (1 ft.)

• Pro Business 2-Way Walkie Talkies
• IP54-rated splashproof and weather-resistant
• 22 Channels and 88 Privacy Codes
• Voice-Activated Transmission (VOX)
• 18-hour lithium-ion battery

• Smartphone remote start car alarm app
• Compatible with Android and iPhone devices
• Unlimited range (subject to service coverage area)
• Shareable with multiple users, with set expiration date
• Premium and Premium Plus service plans available

• High-polished stainless steel tower speaker swivel clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• Multi-Band Radar and Laser Detection
• Graphic Color OLED display with current speed, vehicle voltage, and alert area monitors
• User, pilot, arrow and meter modes
• Directional arrows provide true 360-degree awareness
• Installs on the windshield

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 4 outputs
• Two 1/0 or 4 Gauge and two 8 Gauge outputs

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.23"
• Sensitivity: 83 dB

• 2-Way 5-Button Remote Car Starter
• With 4-Button Transmitter
• 1320 feet Range
• Antenna With Integrated Valet Switch & LED
• Built-in security features

• Universal Parking Brake Bypass Module
• Designed for use in RVs, off-road, and exhibition vehicles
• Emulates a parking brake signal

• 12 Piece Installers Removal Tool Kit
• Made From Nylon Plastic and Metal
• Includes with Ford Removal Keys and Euro Radio Removal Keys
• Various Shapes and Sizes for Different Needs

• Prevents Wire Splitting when using Setscrew Terminals
• Fits 1/0 Gauge AWG Wire
• Includes (4) 0 Gauge Ferrules and (4) Heat Shrink

• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• Universal 6.5" Speaker Mesh Grilles
• Designed for use for most 6.5" speakers
• Also compatible with select NVX 6.5" speakers

Universal Round Chrome-plated Terminal Cup for Speaker / Subwoofer Boxes
• Chrome-Plated Contacts
• Screw Binding Posts
• Easy to Install and Use

• 100 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 4-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 3.8" Hydro Series Water Resistant Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• Single 12" Vented MDF Enclosure
• Holds one 12" subwoofer
• 3/4 MDF (Medium Density Fiberboard) Construction
• Durable black carpeting
• Gold Terminals
• Internal Box Volume: 1.8 cubic ft.

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• JLid-communication and optical audio network hub
• Allows connection of multiple VXi Series amplifiers
• Connects to JLid-COMM port on VXi amps via Cat5 Ethernet cables
• Provides JLid-communication and optional S/PDIF

• Converts internal wireless FM transmitter to a wired FM modulator
• Connects audio output with POD with FM modulator to car radio
• Designed for use with Audiovox SIRCK3 and XC9 vehicle kits

• 360 Degree Camera System
• Backup Camera Included
• DVR Records from All Four Cameras
• 3d Overhead View Available

• Dynamat Xtreme License Plate Kit
• One 4" x 10" Sheet
• Includes License Plate Frame with Dynamat Logo
• Four Self Adhesive Neoprene Foam Gaskets
• Used on the Back of the License Plate

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• Full Frame License Plate Frame Camera Bracket
• Works exclusively with CAM-300 and CAM-400
• Powder coated black metal finish
• Hidden wiring for easy installation

• Upgrade Your Factory Power and Ground Wire
• Perfect for Dealing with Dimming Lights
• Improve the Efficiency of Your Vehicle's Electrical System
• Use for Systems 350A or Less
• Includes All Necessary Wiring
• Ring Terminals are Pre-Connected to Power and Ground Wire

• Makes noise even if thief disconnects main car battery
• Key on/off feature to allow manual override

• Composite RCA to direct camera adaptor
• Compatible with all Alpine stereos with direct camera input
• Ideal for adding any aftermarket camera
• Plug and play, no cutting or splicing required