Universal-Fit Audio for 2020 Buick Enclave

---

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• Universal amplifier turn on/off timer
• Easy 4 wire installation
• Color coded wires

• 4 Ft. Dynamic RGB Whip Light
• 360-degree bright, vibrant LEDs with customizable color patterns
• Silicone coating for heavy duty protection
• Controllable via Stinger UN1810 and ENLIGHT10 app
• Length: 4 ft.

• HPM Series Fused Power Distribution Block
• One 1/0 Gauge or 4 Gauge Input
• Two 4/8 Gauge Outputs
• Multiple Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 12" Amplified Loaded Subwoofer System
• 400 watts RMS
• MTX TN250/1 amplifier included
• Selectable bass boost
• Speaker-level (high-level) inputs (adapter included)
• Wired remote bass level control

• Dual Zone Proximity Sensor
• Dual zone sensing
• Protects both inside and outside of the vehicle
• Each zone is independently adjustable
• LED sensitivity test light
• Pre-wired 4-pin plug allows easy connection to all Omega systems

• Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper • Auto Shutoff

• High Performance Windshield or Glass Mount Amplified Antenna
• Separate AM/FM Amplifiers • Ground wire for noise-cancellation
• LED Indicator confirms amplifier operation

• 240 watts x 1 channel @ 4 ohm
• 400 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 4
• Detection Distance: 1 feet to 5.9 feet

• Weatherproof IPX 5 soundbar
• 1" Pair of Horn Loaded Tweeters
• 3" Pairs of Full-Range Speakers
• Built-in Class-D Amplifier
• Adjustable Clamps fit bars from 1.75" to 2"

• 4" Titanium Pro-Audio Bullet Horn Super Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Includes hardware to connect multiple ZERO 12 ENC boxes

• Wired Bass Remote for select 2013-2025 Punch and Power amplifiers
• Includes bass knob, cable, mounting clip, mounting screws
• Controls level on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• Universal round terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 1" titanium replacement diaphragm for NVX VPRO35TW tweeters
• Restores clear, high-frequency sound
• Replaces damaged or worn components
• Quick and easy installation

• Video switch with trigger wires
• 4 camera input and 1 video output
• 4 trigger wires for each camera

• Works with Most 5-1/4" Speakers
• Factory Style Finishes
• Heavy Duty ABS Plastic
• Works with 6" to 6.5" Speakers

• Universal heavy duty roller for installing sound deadening mats
• Compatible with NVX, Dynamat, and other brands
• Thick plated steel frame
• 2" solid, soft urethane rubber roller

• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.8 dB

• 33-ohm/5-wat load resistors for amplifier integration
• Required when the factory amp or radio needs a speaker load to say operational
• Pack of 5

• Equalizer under dash mounting bracket
• Fits WS420-BT or WS220-BT equalizers (sold separately)
• Made with tough black billet brushed metal finish
• Mounting hardware and screws included

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Universal Rear View Backup Camera
• High-Resolution CMOS PC1089 Image Sensor
• Mounting Style: Top of License Plate Frame
• Viewing Angle: 170 ° (super wide viewing angle)
• Resolution: 510 x 496 
• Waterproof: Yes (IP67/68 waterproof)
• Night vision: Infrared LED's

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• 1" Replacement Diaphragm for Tweeters
• Compatible with most 1" tweeters
• Not compatible with M075T or M075T2 models
• Impedance: 2-ohm

• 8-Channel line driver with remote controller
• 4 pairs of adjustable outputs
• Remote level adjustments of Ch 5/6 and Ch 7/8
• Dual color LEDs for signal level monitoring and setup
• Sealed construction designed for marine applications

• 60 Amp capacity
• Pure OFC Copper
• Compact strand orientation and high strand count
• Soft, flexible PVC Jacket

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 400 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 2.4" Rear view mirror with front HD camera
• Adjustable 1080P HD front facing camera
• 1-Channel FHD DVR (Digital Video Recorder)
• Built-in motion detection, loop recording, park guide
• Includes built-in G-sensor, mic, and speaker
• Easily straps onto original mirror

• Spade Terminals
• 10 Gauge • 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 6-output channels
• Access four user-adjustable 10-band graphic equalizers
• 30-second single button calibration

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Viewing Angle: 170 °
• Resolution: 720 x 480 
• Waterproof: Yes
• Night vision: LED's

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 100

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.69 cubic feet
• Completely miter and dado end panels
• Premium carpeted finish
• Made in the USA

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.36"
• Sensitivity: 85 dB

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2000W car audio stereo systems
• Compatible with most vehicle applications

• Direct wire power cord
• Designed for laser and Radar detectors
• Prevents interference with driving functions
• Compatible with Passport 8500, 9500iX, Solo S3 and S4 Models
• Installs in vehicle fuse panel

• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control

• Mounting clamp for Stealth soundbars with 1.5" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 10" White closed style grille for REV 10 marine tower speakers
• Ideal for marine or outdoor applications
• Easy to install and replace, no drilling required
• Includes (2) speaker grilles and (8) 12mm hex-head screws

• Dual 1/0-gauge input and output to 4-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle