Universal-Fit Audio for 2021 Mazda 6

---

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• 12" Dual Medium Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 2.36 cubic feet

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• 25 ft. 12 Gauge Premium Series Speaker Cable
• Multi-speaker cable for long runs up to 4 Channels
• Ninth conductor can be used for remote turn-on connection
• OFC Copper for flexibility and conductivity

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Yellow LED illuminated ring

• 3.5mm to RCA
•Twisted Pair Interconnect
• 3 FT Long

• 3-Position Compact Fused Ground Distribution Block
• One 1/0 - 4 AWG input
• Three 4 - 8 AWG outputs
• Water-resistant solid brass construction
• TPE-wrapped soft touch with dual gasket sizes

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Waterproof marine grade circuit breaker
• 100 Amp maximum current power
• Weatherproof construction
• Ignition protected

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• Butt Connectors
• 22/18 Gauge
• Color: Red
• Vinyl Insulated
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires

• 50 watts x 8 channel @ 4 ohm
• 100 watts x 8 channel @ 2 ohm
• Bridged: 200 watts x 4 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 8-Channel Amplifier

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.6 dB

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• 900 watts x 1 channel @ 4 ohm
• 1800 watts x 1 channel @ 2 ohm
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 6" 4-pin RGBW hardwire pigtail adapter
• Designed for use with Metra RGB-CB2 (Sold separately)

• 16 Million Color Options
• 4 Programmable Triggers
• Handles Up To 10 Amps Of Lights
• Black Finish

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• 8" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 1.30 cubic feet
• Compatible for Sundown SA8V2 and similar subwoofers (Sold separately)

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes brackets and mounting hardware

• 4" Pro-Audio Bullet Tweeters
• 480 watts Peak Each
• 240 watts RMS Each
• 8 ohm Impedance

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• Premium front and rear dash camera bundle
• WDR (Wide Dynamic Range) recording
• Built-in Wi-Fi for strong and reliable connection
• Impact recording (moving and stationary)
• Mounting Style: Universal multiple mounting
• Viewing Angle: 144° (wide angle view)
• Resolution: 1080P (CMOS)

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Switchable Positive or Negative Trigger
• Slim and Compact Design
• Plug and Play Connection

• 150 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• 400 watts x 1 channel @ 1 ohm
• Total RMS Power: 400 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Accepts 4 AWG or 8 AWG wire
• Custom tooled solid brass
• HPP plating for superior corrosion resistance
• Platinum Finish

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction