Discontinued 2-Channel Amplifiers

• RMS Power: 30W x 2 @ 4 ohm, 60W x 2 @ 2 ohm
• Signal to Noise Ratio: >95dB
• CEA-2006
• Dimensions: 8-1/8" W x 7-3/16" D x 2-3/8" H

250W RMS x 2 chan at 4 ohm • 1000W RMS x 1 chan in bridged mode • 500W RMS x 2 chan at 2 ohm • Bass Remote Included • 2 ohm stereo stable

• 80W x 2 Chan. @ 4 ohm
• 160W x 2 Chan. @ 2 ohm
• 320W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

PowerZone Series 2-Channel Car Amplifier • 350W x 2 chan. @ 4 ohm • 700W x 2 chan. @ 2 ohm • 1400W x 1 chan. @ 4 ohm • MOSFET output power supply • Tuned Bass EQ (0-12 dB bass boost at 45 Hz)

• 500W x 1-Chan @ 4 Ohm, Bridged
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads
• SEPP Analog Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Preamp RCA Outputs
• 3-Way System Protection Circuitry

• RMS: 600W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm
• Total RMS Power: 1000W
• Unregulated MOSFET switching type
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• NexD™ Switching Technology

Item is missing inner packaging and inner box
• RMS Power: 250W x 2 @ 4 ohm, 500W x 2 @ 2 ohm, 1000W x 1 @ 4 ohm Mono Bridged
• Total Peak Power: 1000W
• Rugged MOSFET Pulse Width Modulation Power Supply

Premier Series 2-Channel Class FD Car Amplifier • 300W x 2 chan. Max• 150W RMS x 2 chan. @ 4 ohm • MOSFET Power Supply • Wired remote bass level control included • A new generation of Full-Range Class D • Consumes far less current than traditional amplifier designs

400W RMS Punch Series Amplifier • Bridgeable 2-Channel • requires an 8-gauge wiring kit — wiring and hardware not included with amplifier • variable Punch Bass boost • CEA compliant

1050 watts RMS x 1 bridged • variable high-pass/low-pass crossover • wired remote control of Punch Bass • preamp outputs

700W 2 channel Power Series Amplifier • 350W x 2 channel power output • chrome finish with clear top-view panel • adjustable Hi/Lo electronic crossover network • variable bass boost • remote turn on/off • soft turn on circuitry • Hi level MOLEX inputs • M

• 500 Watts RMS x 2 @ 4 ohm
• 1000 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 2000 Watts Variable low-pass filter: 40 - 400 Hz
• Speaker-level (high-level) inputs
• Variable Bass Boost
• Heavy duty aluminum alloy heat-sink

• Thunder Marine Series 2-Channel Class AB Marine Amplifier
• 45W x 2 chan. @ 4 ohm
• 75W x 2 chan. @ 2 ohm
• MOSFET power supply
• Conformal coated circuit board
• Gold-plated screw terminals

1920 watts 2-channel car amplifier • Hyper Bass Series • 440 watts RMS x 2 chan @ 2 ohm • 370 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >98 dB

• 500W x 2-Chan @ 2 Ohm
• Injection Molded Polypropylene Cone
• UV Resistant Foam Surround
• Stamped Steel Basket
• Resin Reinforced Spider
• Top-mount depth: 5.79"

• SEPP Analog Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Preamp RCA Outputs
• 3-Way System Protection Circuitry
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

Tarantula Series 2-Channel Car Amplifier • 640W RMS • 320W x 2-Chan @ 2 Ohm • 210W x 2-Chan @ 4 Ohm • IDI (Intelligent Distress Indicator) • Tri-Guard System Protection Circuitry • OEM Floating Ground Input

• 150W x 2 chan. @ 4 ohm
• 225W x 2 chan. @ 2 ohm
• 450W x 1 chan. @ 4 ohm
• Tuned Bass EQ
• Balanced differential inputs
• Low-Pass & High-Pass Filters

2 Channel Power Amplifier • 700W x 2 chan. @ 1 Ohm • 500 watts x 2 chan. @ 2 Ohm • Max Output Power: 2000W • High/Low Level RCA Input • Wired remote level control(included) • • • • • • •

• 600 Watts x 2 Chan. @ 2 Ohm
• 300 Watts x 2 Chan. @ 4 Ohm
• 1200 Watts x 1 Chan. @ 4 Ohm, Bridged
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters
• Speaker-level (high-level) inputs
• Signal to Noise Ration: >90 dB

GT Reference Series 2-Channel Amplifier • 75W x 2 Chan. @ 4 Ohm • 100W x 2 Chan. @ 2 Ohm • Fully Computer-Controlled Diagnostics System • Q-Tune™ Technology • Fan Cooled Aluminum Alloy Heatsink

• 400W x 2 Chan. @ 4 ohm
• 800W x 2 Chan. @ 2 ohm
• 1600W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 2 Gauge Power and Ground Inputs
• Illuminated Logo for Stylish and Unique Design

• Package includes 4 Gauge Wiring Kit!
• Chaos Extreme Series 2-Channel Class AB Amplifier
• 240W x 2 Chan. @ 4 ohm
• 800W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• 2 Ohm Stable Stereo Operation with Power Output Increase

Power Series 2-Channel Class AB Car Amplifier • 100W x 2-Chan @ 2 Ohm MAX • Wired Remote Bass Level Control • Variable Bass Boost • Preamp RCA Outputs • Variable Low/High-Pass Filter

ZX Series 2-Channel Class AB Car Amplifier • 150W x 2 chan. @ 4 ohm • 225W x 2 chan. @ 2 ohm • 450W x 1 chan. @ 4 ohm • 450W x 2 chan. Max • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

2-Channel Class A/B Amplifier with Cobalt Blue Illumination and chrome finish • 840W Max Power Output • 420W RMS @ 2 ohm • 300W RMS @ 4 ohm • Digital LCD Voltmeter Display • Cooling Fan • Preamp Outputs

• 3250W RMS
• 1625W x 2 Chan @ 1 Ohm
• Wired HFR-G1 Remote Bass Level Control
• Variable Bass Boost
• Alloy Finned Heatsink

Atom Series 2-Channel Car Amplifier • Class A/B • 75W x 2 Chan @ 4 ohm • 150W x 2 Chan @ 2 ohm • 600W Max • PWM MOSFET Power Supply • Speaker-level Inputs • System Protection Circuitry • Aluminum Heatsink • Soft Start Turn-on

2-Channel Amplifier • 4 ohm: 60 watts x 2 • 2 ohm: 75 watts x 2 • Bridged, 4 ohm: 150 watts x 1 • Beat Frequency Control switch • Gain Control • Low-Pass-Filter select switch • Speaker output terminal • S/N ratio: 100 dB • •

XR Series 2-Channel Car Amplifier • 60W x 2 Chan. @ 4 ohm • 200W Max • MOSFET Power Supply • Line and Speaker-Level Inputs • Gold-Plated RCA and Speaker Level Inputs • Variable High/Low Pass Filter

Bridgeable 2-Channel Class AB Car Amplifier • 300W Max 10" Subwoofer • 300W x 1 Channel Max Output Amplifier • 10" sealed box + 8 gauge amplifier install kit included • Matched setup, tested and perfect for those interested in adding bass for a small amount of money

2-Channel Class A/B Amplifier with Cobalt Blue Illumination and chrome finish • 1680W Max Power Output • 840W RMS @ 2 ohm • 600W RMS @ 4 ohm • Digital LCD Voltmeter Display • Cooling Fan • Preamp Outputs

KX Series 2-Channel Class AB Car Amplifier • 450W x 2 chan. @ 4 ohm • 540W x 2 chan. @ 2 ohm • 880W x 1 chan. @ 4 ohm • 2400W x 2 chan. Max • Pulse width modulated (PWM) MOSFET power supply • Thermal, short, and overload protection

• Bridged, 4 ohm: 500 watts x 1 chan.
• Injection-Molded Polypropylene Cone
• Ribbed Polyurethane Surround
• Large-Diameter Spider
• High-Strength Spiralead Tinsel Leads
• Auxiliary for use when RCA connections are not available
• Ultra Compact High Density Aluminium Alloy Chassis
• Direct FET Power Mosfet Output Stage
• Dimensions: 1.4"W x 4.02"L x 6.61"H

• 1800 Watts Max
• 900 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters
• Speaker-level (high-level) inputs
• Signal to Noise Ration: >90 dB

760 watts, 2-Channel Pioneer GM-5200T Amplifier • 125W x 2 chan. @ 4 Ohm • 190W x 2 chan. @ 2 Ohm • Bridged, 4 ohm: 380 watts x 1 chan. • speaker and preamp level inputs and outputs • CEA-2006 compliant

Force Series 2-Channel Class A/B Amplifier • 350 Watts x 2 Chan @ 4 Ohm • 2000 Watts Max • Chrome-Plated RCA Level Inputs And Screw Terminals • LED Power And Protect Indicators • Line and Speaker-Level Inputs

38W RMS x 2 at 4 ohm • 150W RMS x 1 in bridged mode • 75W RMS x 2 at 2 ohm • Requires 8 Gauge Wiring • 2 ohm mono stable

GTX Series 2-Channel Car Amplifier • Class AB • 1400 Watts Max • 220W x 2 Chan. @ 4 Ohm • 270W x 2 Chan. @ 2 Ohm • 0-10 dB Tuned Bass EQ • 2/1 Channel Operation • Gold-Plated Contacts • Low-Pass Filter

Intake Series 2-Channel Amplifier • 1600W Max Power Output • 400W RMS x 2 chan. @ 2 ohm • 800W x 1 chan. Bridged @ 4 ohm • 200W RMS x 2 chan. @ 4 ohm stereo • Class A/B cicuitry • cooling fan • MOSFET power supply • 4-way protection circuitry

4 ohm: 95 watts x 2 • 2 ohm: 120 watts x 2 • Bridged, 4 ohm: 240 watts x 1 • PWM MOSFET power supply • High or low level inputs with floating ground • Tri-mode capable • Frequency Response: 10 Hz - 30,000 Hz

Single DIN CD/Cass Combo • Detachable face • 20 watts RMS x 4 • Bassxpander • Dolby B • full logic controls • changer control

2-Channel Class AB Car Amplifier • 170W x 2 chan. @ 4 ohm • 250W x 2 chan. @ 2 ohm • 500W x 1 chan. @ 4 ohm • 500W x 2 chan. Max • Built-in cooling fan • Speaker-level inputs • Preamp RCA outputs

• 60W x 2 Chan. @ 4 ohm
• 120W x 2 Chan. @ 2 ohm
• 240W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• FLUID-FETS Circuit for Smooth Sound Quality

• 100W x 2 Chan. @ 4 ohm
• 200W x 2 Chan. @ 2 ohm
• 400W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

600W 2-Channel Amplifier • 150W x 2 chan. @ 4 Ohm • 300W x 2 chan. @ 2 Ohm • full MOSFET circuitry • line inputs/outputs • adjustable input sensitivity • power/protection LED • S/N ratio: 90dB

450W High Current 2-Channel Amplifier • 75W x 2 chan. @ 4 Ohm • 140W x 2 chan. @ 2 Ohm • MOSFET power supply • aluminum heat sink • 4-way protection circuitry • digital voltmeter • thermal cooling fan

Power Series 2-Channel Class AB Car Amplifier • 230W x 2-Chan @ 2 Ohm MAX • Wired Remote Bass Level Control • Variable Bass Boost • Preamp RCA Outputs • Variable Low/High-Pass Filter

2-Channel Class A/B Amplifier with Cobalt Blue Illumination and chrome finish • 560W Max Power Output • 280W RMS @ 2 ohm • 200W RMS @ 4 ohm • Digital LCD Voltmeter Display • Cooling Fan • Preamp Outputs

• 4 ohm: 400 watts x 2 chan.
• 2 ohm: 800 watts x 2 chan.
• Bridged, 4 ohm: 1600 watts x 1 chan.
• SEPP Class A/B Analog Amplifier

200W RMS x 2 at 4 ohm • 800W RMS x 1 in bridged mode • 400W RMS x 2 at 2 ohm • Requires 2 Gauge Wiring • 2 ohm mono stable • Remote Gain Control

250 watts RMS x 1 bridged • selectable high-/low-pass crossovers • wired remote ThunderEQ bass boost • preamp outputs • speaker-level inputs with SmartEngage

• 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• 1" Edge-Driven Textile Dome Tweeter
• Mounting Depth: 2-1/8"
• Injection Molded Polypropylene Cone
• Nominal Impedance: 2 ohm
• Sensitivity: 93dB
• 3-Way System Protection
• Single Channel Operation
• 4 Gauge Power and Ground Inputs
• Stylish Magnetic Panel Covers Tuning Options for Clean Install

1200 watts 2-channel Gothic Series car amplifier • 300 watts RMS x 2 chan @ 2 ohm • 250 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >97 dB

DAB Series 2-Channel Class A/B Car Amplifier • Total RMS Power: 400 Watts • Pulse Width Modulated MOSFET Power Supply • Preamp RCA Outputs • 4-Way System Protection • Frequency Response: 10-38,000 Hz

Item is Used
• RMS 100W x 2 @ 4 ohm, 150W x 2 @ 2 ohm, 300W x 1 @ 4 ohm Bridged
• Features Rockford Fosgate's Class-BR Topology
• CEA-2006 Compliant
• Ultra Compact Chassis
• Boosted Rail Design
• Dimensions: 6.75"L x 4.25"W x 1.53"H

Tarantula Series 2-Channel Car Amplifier • 320W RMS • 160W x 2-Chan @ 2 Ohm • 100W x 2-Chan @ 4 Ohm • IDI (Intelligent Distress Indicator) • Tri-Guard System Protection Circuitry • OEM Floating Ground Input

425 watts RMS x 2 channels at 2 ohm • 3-way protection circuitry • 4 ohm mono stable / 2 ohm stereo stable

• RMS: 100 watts x 2 chan. @ 4 ohm, 150 watts x 2 chan. @ 2 ohm, 300 watts x 1 chan. @ 4 ohm Bridged
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards

• RMS: 150W x 2 @ 4 ohm, 300W x 2 @ 2 ohm
• 600W RMS x 1 Channel @ 4 Ohm Bridged
• Pulse Width Modulated MOSFET Power Supply
• LED Status Indicator
• Fully Adjustable Bass EQ
• 3-Way System Protection
• Low Level Line Inputs
• Aluminum Finned Heatsink