Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued 2-Channel Amplifiers

Discontinued 2-Channel Amplifiers

Filters
Amplifiers ✕
Clear Filters
Reset Done
Product Type
Amplifiers,
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
PowerZone Series (19)
Phantom Series (18)
Mean Machine Series (16)
Evolution Series (13)
Punch Series (11)
Zeus Series (11)
Torque Series (9)
Anarchy Series (8)
Chaos EXXtreme Series (8)
GM Series (7)
Gothic Series (7)
Mt. Olympus Series (7)
ATA Series (6)
ATX Series (6)
AXL Series (6)
Black Ice Series (6)
Ground Pounder Series (6)
HCP Series (5)
KX Series (5)
Machete Series (5)
Power One Series (5)
Riot Series (5)
Apocalypse Series (4)
Chaos EXXtreme II Series (4)
Power Series (4)
Reference Series (4)
SQ Series (4)
V Series (4)
Z-Line Series (4)
APMI Series (3)
BAMF Series (3)
Brutus Series (3)
BX Series (3)
Chaos Epic Series (3)
Consumer Line Series (3)
Discus Series (3)
DX Series (3)
HED3 Series (3)
Murdered Out Series (3)
ONYX Series (3)
Prime Series (3)
Psyclone Series (3)
Punch BR Series (3)
Sedona Series (3)
Street Machine Series (3)
X Series (3)
Alpha Series (2)
APSM Series (2)
Armor Series (2)
BB Series (2)
Brutus X 14 Series (2)
Crypt Series (2)
CTX Series (2)
DRVN Series (2)
DS Series (2)
Kappa Series (2)
Picasso Series (2)
Power Class Series (2)
Primus Series (2)
PRX Series (2)
PXA Series (2)
Q Series (2)
Reaper Series (2)
SPL Show Series (2)
Tarantula Series (2)
Terminator Series (2)
XD Series (2)
XDM Series (2)
XED Series (2)
Apex Series (1)
APK Series (1)
Apocalypse Atom Pro Series (1)
Apocalypse Sport Series (1)
Arachnid Series (1)
AX2 Series (1)
BBX Series (1)
BLADE BP Series (1)
Bomber Series (1)
Buran Series (1)
CANDY-X Series (1)
Charge Series (1)
D Series (1)
Dealer Line Series (1)
Edge Series (1)
Elite Series (1)
Force Series (1)
Formula Series (1)
HED Series (1)
iON Series (1)
JA Series (1)
JX Series (1)
KAC Series (1)
Kappa Perfect Series (1)
LP Series (1)
M Series (1)
MINI BANG Series (1)
Mini Max Series (1)
Mini Series (1)
MOFO Series (1)
MXA Series (1)
N Series (1)
Nano Edge Series (1)
Nautic Series (1)
Overdrive Series (1)
Picasso-Nano Series (1)
Power X Series (1)
PowerZone 2 Series (1)
Pulse Series (1)
Razor Series (1)
S Series (1)
Saber Series (1)
Sport Series (1)
SRX Series (1)
Stadium Series (1)
Stage Series (1)
Stealth Series (1)
Stealth Shot Series (1)
SYN-DX Series (1)
Tarantula-NANO Series (1)
USX Series (1)
VEGA Series (1)
Vertigo Series (1)
VXi Series (1)
X-Line Series (1)
XD-v2 Series (1)
Xenith Series (1)
XH Series (1)
ZRS Series (1)
ZTX Series (1)
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Polk Audio PA D2000.2 (PAD2000.2) - Open Box, Acceptable but Missing part(s) (Used)

500W RMS PA D Series Class-D 2-channel Car Amplifier

PA D2000.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Polk Audio PA D2000.2 (PAD2000.2) - Open Box, Acceptable but Missing part(s) (Used)

500W RMS PA D Series Class-D 2-channel Car Amplifier

• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

Hifonics Zeus ZXi200.2

800W RMS, Zeus Series 2-Channel Amplifier (ZXi 200.2)

ZXi200.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hifonics Zeus ZXi200.2

800W RMS, Zeus Series 2-Channel Amplifier (ZXi 200.2)

Zeus Series 1/2 Channel Class A/B Car Amplifier • 400W x 2-Chan. @ 2 Ohm • 200W x 2-Chan. @ 4 Ohm • Wired HFR-3 Remote • 4-Way System Protection • MOSFET Power Supply • Silver-Plated RCA Inputs

11

Zeus Series 1/2 Channel Class A/B Car Amplifier • 400W x 2-Chan. @ 2 Ohm • 200W x 2-Chan. @ 4 Ohm • Wired HFR-3 Remote • 4-Way System Protection • MOSFET Power Supply • Silver-Plated RCA Inputs

Boston Acoustics GT-24

900W RMS, 2-Channel Amplifier

GT-24 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Boston Acoustics GT-24

900W RMS, 2-Channel Amplifier

2-Channel High Current Amplifier • 300W RMS x 2 @ 2 • 900W RMS x 1 @ 2 • Adjustable Mounting Feet • Screw-Down Security Cover • 2 Ohm Mono Stable • Continuously Variable Crossover and Q

2-Channel High Current Amplifier • 300W RMS x 2 @ 2 • 900W RMS x 1 @ 2 • Adjustable Mounting Feet • Screw-Down Security Cover • 2 Ohm Mono Stable • Continuously Variable Crossover and Q

Rockford Fosgate Punch P450.2

Punch Series 2-Channel Amplifier

P450.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Rockford Fosgate Punch P450.2

Punch Series 2-Channel Amplifier

Punch Series 2-Channel Amplifier • 100W x 2 chan. @ 4 Ohm • 225W x 2 chan. @ 2 Ohm • focused mass heatsink design • TO-247 MOSFETs • removable connector cover • LED indicators • preamp inputs/outputs

1

Punch Series 2-Channel Amplifier • 100W x 2 chan. @ 4 Ohm • 225W x 2 chan. @ 2 Ohm • focused mass heatsink design • TO-247 MOSFETs • removable connector cover • LED indicators • preamp inputs/outputs

Lanzar OPTI250X2

1000W Max Class A/B 2-Channel OptiDrive Series Car Amplifier

OPTI250X2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Lanzar OPTI250X2

1000W Max Class A/B 2-Channel OptiDrive Series Car Amplifier

• 4 ohm: 250 watts x 2 chan.
• 2 ohm: 500 watts x 2 chan.
• Bridged,4 ohm: 1000W x 1 chan.
• Pulse Width Modulated MOSFET Power Supply

1

• 4 ohm: 250 watts x 2 chan.
• 2 ohm: 500 watts x 2 chan.
• Bridged,4 ohm: 1000W x 1 chan.
• Pulse Width Modulated MOSFET Power Supply

Kicker 08ZX850.2

850W RMS, 2-Channel ZX Series Amplifier (ZX850.2, 08ZX8502, ZX8502)

08ZX850.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker 08ZX850.2

850W RMS, 2-Channel ZX Series Amplifier (ZX850.2, 08ZX8502, ZX8502)

ZX Series 2-Channel Class AB Car Amplifier • 295W x 2 chan. @ 4 ohm • 425W x 2 chan. @ 2 ohm • 850W x 1 chan. @ 4 ohm • 850W x 2 chan. Max • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

2

ZX Series 2-Channel Class AB Car Amplifier • 295W x 2 chan. @ 4 ohm • 425W x 2 chan. @ 2 ohm • 850W x 1 chan. @ 4 ohm • 850W x 2 chan. Max • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

Cerwin-Vega XED600.2

600W XED Series 2-Channel Class AB Amplifier

trophy sign

High Quality 2-Channel Class AB Topology Design!

XED600.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega XED600.2

600W XED Series 2-Channel Class AB Amplifier

• RMS Power: 60W x 2 @ 4 ohm , 85W x 2 @ 2 ohm , Bridged 240W x 1 @ 4 ohm
• Total Peak Power: 600W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

Promo Savings Icon
trophy sign

High Quality 2-Channel Class AB Topology Design!

2

• RMS Power: 60W x 2 @ 4 ohm , 85W x 2 @ 2 ohm , Bridged 240W x 1 @ 4 ohm
• Total Peak Power: 600W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

Lanzar MXA284

5000W Max, 2-Channel Max Series Amplifier (MXA-284)

MXA284 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Lanzar MXA284

5000W Max, 2-Channel Max Series Amplifier (MXA-284)

Max Series 2-Channel Car Amplifier • 5000W Max • 650W x 2-Chan. @ 2 Ohm • 450W x 2-Chan. @ 4 Ohm • Phase Shift 0-180° • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

7

Max Series 2-Channel Car Amplifier • 5000W Max • 650W x 2-Chan. @ 2 Ohm • 450W x 2-Chan. @ 4 Ohm • Phase Shift 0-180° • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

MB Quart NA180.2

180W RMS Nautical Series Class-AB Bridgeable 2-Channel 2-Ohm Stable Marine Amplifier

NA180.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

MB Quart NA180.2

180W RMS Nautical Series Class-AB Bridgeable 2-Channel 2-Ohm Stable Marine Amplifier

• 60W x 2 Chan. @ 4 ohm
• 90W x 2 Chan. @ 2 ohm
• 180W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• 3-Way Protection Circuitry

5

• 60W x 2 Chan. @ 4 ohm
• 90W x 2 Chan. @ 2 ohm
• 180W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• 3-Way Protection Circuitry

Soundstream TN2.600D

600W 2-Channel Tarantula-NANO Series Class D Amplifier

TN2.600D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream TN2.600D

600W 2-Channel Tarantula-NANO Series Class D Amplifier

• RMS Power: 200W x 2 @ 4 ohm, 300W x 2 @ 2 ohm
• Class D Full Range SMT Circuitry
• High and Low Pass Filters
• Dimensions: 6.75" W x 6.825" L x 1.75" H

6

• RMS Power: 200W x 2 @ 4 ohm, 300W x 2 @ 2 ohm
• Class D Full Range SMT Circuitry
• High and Low Pass Filters
• Dimensions: 6.75" W x 6.825" L x 1.75" H

SPL GLA2-1500

1500W Max 2-Channel Gorilla Series Car Amplifier

GLA2-1500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL GLA2-1500

1500W Max 2-Channel Gorilla Series Car Amplifier

• 4 ohm: 250 watts x 2 chan.
• 2 ohm: 325 watts x 2 chan.
• Bridged, 4 ohm: 650 watts x 1 chan.
• Max power output: 1500 watts x 1 chan.

1

• 4 ohm: 250 watts x 2 chan.
• 2 ohm: 325 watts x 2 chan.
• Bridged, 4 ohm: 650 watts x 1 chan.
• Max power output: 1500 watts x 1 chan.

Soundstream PCX2.540

540W RMS, 2-Channel Picasso Series Amplifier

PCX2.540 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream PCX2.540

540W RMS, 2-Channel Picasso Series Amplifier

Picasso Series 2-Channel Class AB Car Amplifier • 180W x 2 Chan. @ 4 ohm • 270W x 2 chan. @ 2 ohm • 540 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

Picasso Series 2-Channel Class AB Car Amplifier • 180W x 2 Chan. @ 4 ohm • 270W x 2 chan. @ 2 ohm • 540 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

Hitron HKA800.2

800W Max Pro Series 2-Channel Class AB Car Amplifier with Remote Level Control

HKA800.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Hitron HKA800.2

800W Max Pro Series 2-Channel Class AB Car Amplifier with Remote Level Control

• 800W Max
• 400W x 2-Chan. @ 2 Ohm
• 75W x 2-Chan. RMS @ 4 Ohm
• Tri-Mode Speaker Operation Output
• Speaker-Level Inputs
• Automatic Output Power Increase At 2 Ohm

1

• 800W Max
• 400W x 2-Chan. @ 2 Ohm
• 75W x 2-Chan. RMS @ 4 Ohm
• Tri-Mode Speaker Operation Output
• Speaker-Level Inputs
• Automatic Output Power Increase At 2 Ohm

Lanzar MXA224

1000W Max, 2-Channel Max Series Amplifier (MXA-224)

MXA224 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Lanzar MXA224

1000W Max, 2-Channel Max Series Amplifier (MXA-224)

Max Series 2-Channel Car Amplifier • 1000W Max • 100W x 2-Chan. @ 2 Ohm • 75W x 2-Chan. @ 4 Ohm • Phase Shift 0-180° • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

5

Max Series 2-Channel Car Amplifier • 1000W Max • 100W x 2-Chan. @ 2 Ohm • 75W x 2-Chan. @ 4 Ohm • Phase Shift 0-180° • 3-Way System Protection Circuitry • Stiffly Regulated PWM MOSFET Power Supply

FLI Audio Loaded 450s FL450S-F1

450W Max, Loaded Series 2-Channel Power Amplifier

FL450S-F1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

FLI Audio Loaded 450s FL450S-F1

450W Max, Loaded Series 2-Channel Power Amplifier

Loaded Series 2-Channel Power Amplifier • 100 Watts x 2 Chan @ 4 Ohm • 115 Watts x 2 Chan. @ 2 Ohm • 450 Watts Max • Selectable Bass EQ • High-Level Inputs • Heavy Duty Aluminum Heatsink • Illuminated FLI Logo

Loaded Series 2-Channel Power Amplifier • 100 Watts x 2 Chan @ 4 Ohm • 115 Watts x 2 Chan. @ 2 Ohm • 450 Watts Max • Selectable Bass EQ • High-Level Inputs • Heavy Duty Aluminum Heatsink • Illuminated FLI Logo

SoundStorm EV2.3000

3000W 2-Channel Class AB Evolution Series MOSFET Power Amplifier w/ Remote Subwoofer Level Control

EV2.3000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SoundStorm EV2.3000

3000W 2-Channel Class AB Evolution Series MOSFET Power Amplifier w/ Remote Subwoofer Level Control

2-Channel Class AB Evolution Series Amplifier • Pulse Width Modulated MOSFET Power Supply • Bass Remote Level Control Included • Variable Bass Boost • 2-Way System Protection Circuitry • Dark Gray Anodized Heatsink

3

2-Channel Class AB Evolution Series Amplifier • Pulse Width Modulated MOSFET Power Supply • Bass Remote Level Control Included • Variable Bass Boost • 2-Way System Protection Circuitry • Dark Gray Anodized Heatsink

SPL CRM520-2

CRM520-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

SPL CRM520-2

2-Channel Power Amplifier • 150W RMS x 2 @ 2 • 125W RMS x 2 @ 4 • 18dB Bass Boost • 3-Way Protection Circuitry • High and Low Level Inputs • Line Outputs • Variable Crossovers • PWM MOSFET Circuitry

2

2-Channel Power Amplifier • 150W RMS x 2 @ 2 • 125W RMS x 2 @ 4 • 18dB Bass Boost • 3-Way Protection Circuitry • High and Low Level Inputs • Line Outputs • Variable Crossovers • PWM MOSFET Circuitry

Visonik V208XT

400 watts, 2-Channel Amplifier

V208XT big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Visonik V208XT

400 watts, 2-Channel Amplifier

400W 2-Channel Amplifier • 100W x 2 chan. @ 4 Ohm • 200W x 2 chan. @ 2 Ohm • full MOSFET circuitry • line inputs/outputs • adjustable input sensitivity • power/protection LED • S/N ratio: 90dB

3

400W 2-Channel Amplifier • 100W x 2 chan. @ 4 Ohm • 200W x 2 chan. @ 2 Ohm • full MOSFET circuitry • line inputs/outputs • adjustable input sensitivity • power/protection LED • S/N ratio: 90dB

Soundstream PCX2.350

350W Picasso Series 2-Channel Amplifier

PCX2.350 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream PCX2.350

350W Picasso Series 2-Channel Amplifier

Picasso Series 2-Channel Car Amplifier • 110W x 2 chan @ 4 ohm • 175W x 2 chan @ 2 ohm • MOSFET Power Supply • Tri-Guard Amplifier Protection • Intelligent Distress Indicator • Black Hairline Anodized Aluminum Heatsink

Picasso Series 2-Channel Car Amplifier • 110W x 2 chan @ 4 ohm • 175W x 2 chan @ 2 ohm • MOSFET Power Supply • Tri-Guard Amplifier Protection • Intelligent Distress Indicator • Black Hairline Anodized Aluminum Heatsink

Belva BB15002v2( Open Box Complete)

1500W Max (600W RMS) Full Range Class A/B 2-Channel Amplifier

BB15002v2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB15002v2( Open Box Complete)

1500W Max (600W RMS) Full Range Class A/B 2-Channel Amplifier

• 170 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• Dimensions: 12.25"W x 8"D x 2.25"H

• 170 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• Dimensions: 12.25"W x 8"D x 2.25"H

Prev 21 22 23 24 25 Next

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in Discontinued 2-Channel Amplifiers

    2 Channel Amplifiers Frequently Asked Questions (FAQ)
    Yes, many 2-channel amplifiers can be used in bridge mode to combine the power of both channels, making them suitable for powering a subwoofer and speakers at the same time. However, it's essential to check the amplifier's specifications and power ratings to ensure they match the impedance and power requirements of your subwoofer and speakers. Additionally, using a 2-channel amplifier for this purpose can result in power distribution challenges, as both the subwoofer and speakers may not receive optimal power for their specific frequency ranges.
    A 2-channel amplifier, also known as a stereo amplifier, is designed to power two speakers, typically a pair of front speakers or a pair of rear speakers. On the other hand, a mono amplifier, also known as a single-channel amplifier, is dedicated to powering a single speaker, usually a subwoofer. The primary difference lies in their application and configuration. While a 2-channel amplifier is suitable for powering multiple speakers, a mono amplifier is more focused on delivering high power output to a single speaker for deep bass reproduction.
    Yes, upgrading your factory car audio system with a 2-channel amplifier can significantly enhance the overall sound quality and volume. Factory audio systems often lack the power needed to drive aftermarket speakers properly. Adding a 2-channel amplifier allows you to provide more power to your front or rear speakers, resulting in improved clarity, detail, and dynamics. It's an excellent way to breathe new life into your car's audio system without the need for extensive modifications. Be sure to select an amplifier with an appropriate power rating and ensure compatibility with your existing audio setup.
    To ensure compatibility, consider factors like power output, impedance, and form factor. Check the power ratings of your speakers and subwoofers, and choose an amplifier that can deliver the required power at the appropriate impedance. Additionally, verify that the amplifier's dimensions fit within the available space in your vehicle. Some 2-channel amplifiers come with adjustable crossovers and gain controls, allowing you to fine-tune the audio output to match your specific setup. If you have any uncertainties, consult with an audio specialist or contact Sonic Electronix customer support for expert assistance.
    While 2-channel amplifiers can provide power to two speakers, they are typically not designed for bi-amping applications. Bi-amping involves using separate amplifiers for the tweeters and woofers of a speaker system to improve audio performance. To bi-amp speakers, you would require an additional set of channels dedicated to each driver. In this case, a multi-channel amplifier or a combination of mono and stereo amplifiers is more suitable. If bi-amping is a priority, consider looking into multi-channel amplifiers that offer specific configurations for bi-amping setups. Always check the specifications and features of the amplifier to ensure it can support bi-amping before making a purchase.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1977 Mazda Mizer

    2009 Ford Edge

    2011 BMW X6

    2004 Ford Taurus

    2020 Chevrolet Traverse

    1982 BMW 320i

    2023 Audi RS5

    2011 Chrysler 300

    2002 Mitsubishi Eclipse

    2021 Dodge Durango

    Vehicle
    Store     Delete

    1995 Honda VFR750F Interceptor

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1977 Mizer
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo