Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Cerwin-Vega Store
  3. Discontinued Cerwin-Vega Car Audio & Electronics
  4. Discontinued Cerwin-Vega Car Amplifiers
  5. Discontinued Cerwin-Vega 2-Channel Amplifiers

Discontinued Cerwin-Vega 2-Channel Amplifiers

For a focused, high-fidelity sound, Cerwin-Vega's 2-channel amplifiers are the ideal choice.

Filters
Cerwin-Vega ✕
Amplifiers ✕
Clear Filters
Reset Done
Product Type
Amplifiers,
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Cerwin-Vega H41000.2

1100W HED Series 2-Channel Class AB Car Amplifier

H41000.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega H41000.2

1100W HED Series 2-Channel Class AB Car Amplifier

• RMS Power: 100W x 2 @ 4 ohm , 150W x 2 @ 2 Ohm , Bridged 300 W x 1 @ 4 ohm
• Total Peak Power: 1100W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

1

• RMS Power: 100W x 2 @ 4 ohm , 150W x 2 @ 2 Ohm , Bridged 300 W x 1 @ 4 ohm
• Total Peak Power: 1100W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

Cerwin-Vega VEGA250.2

250W RMS VEGA Series 2-Channel Class AB Car Amplifier

VEGA250.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega VEGA250.2

250W RMS VEGA Series 2-Channel Class AB Car Amplifier

• 65W x 2 Chan. @ 4 ohm
• 125W x 2 Chan. @ 2 ohm
• 250W x 1 Chan. @ 4 ohm Bridged
• Vega Bass Boost
• Hi/Low Level Inputs
• Variable Hi/Low-Pass Filters
• Differential Balanced Inputs

2

• 65W x 2 Chan. @ 4 ohm
• 125W x 2 Chan. @ 2 ohm
• 250W x 1 Chan. @ 4 ohm Bridged
• Vega Bass Boost
• Hi/Low Level Inputs
• Variable Hi/Low-Pass Filters
• Differential Balanced Inputs

Cerwin-Vega HED3400.2

400W Max 2-Channel HED3 Series Class AB Car Power Amplifier

HED3400.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega HED3400.2

400W Max 2-Channel HED3 Series Class AB Car Power Amplifier

• 60W x 2 Chan. @ 4 ohm
• 120W x 2 Chan. @ 2 ohm
• 240W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

2

• 60W x 2 Chan. @ 4 ohm
• 120W x 2 Chan. @ 2 ohm
• 240W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

Cerwin-Vega XED600.2

600W XED Series 2-Channel Class AB Amplifier

trophy sign

High Quality 2-Channel Class AB Topology Design!

XED600.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega XED600.2

600W XED Series 2-Channel Class AB Amplifier

• RMS Power: 60W x 2 @ 4 ohm , 85W x 2 @ 2 ohm , Bridged 240W x 1 @ 4 ohm
• Total Peak Power: 600W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

Promo Savings Icon
trophy sign

High Quality 2-Channel Class AB Topology Design!

2

• RMS Power: 60W x 2 @ 4 ohm , 85W x 2 @ 2 ohm , Bridged 240W x 1 @ 4 ohm
• Total Peak Power: 600W
• Variable Low-Pass Filter
• Pulse Width Modulated MOSFET Power Supply
• Heavy-Grade Aluminum Alloy Extruded Heatsink

Cerwin-Vega SX220.2 (Stealth 220.2) 220W RMS, 2-Channel Stealth Series Amplifier

220W RMS, 2-Channel Stealth Series Amplifier

SX220.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega SX220.2 (Stealth 220.2) 220W RMS, 2-Channel Stealth Series Amplifier

220W RMS, 2-Channel Stealth Series Amplifier

Stealth Series 2-Channel Class D Car Amplifier • 65 watts x 2 chan. @ 4 ohm • 110 watts x 2 chan. @ 2 ohm • Full PWM Power Supply • Standard ATC/ATO Automotive 25A Power Fuses

4

Stealth Series 2-Channel Class D Car Amplifier • 65 watts x 2 chan. @ 4 ohm • 110 watts x 2 chan. @ 2 ohm • Full PWM Power Supply • Standard ATC/ATO Automotive 25A Power Fuses

Cerwin-Vega XL-300.2

XL-300.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega XL-300.2

2 Channel 300 watt power amplifier • RMS: 150W x 2 @ 2 ohm • RMS: 105W x 2 @ 4 ohm • Bridged RMS: 300W @ 4 ohm • Built-in crossover • Bass boost: 0,6,12dB

1

2 Channel 300 watt power amplifier • RMS: 150W x 2 @ 2 ohm • RMS: 105W x 2 @ 4 ohm • Bridged RMS: 300W @ 4 ohm • Built-in crossover • Bass boost: 0,6,12dB

Cerwin-Vega HED300.2

300W MAX, HED Series 2-Channel Class AB Car Amplifier

HED300.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega HED300.2

300W MAX, HED Series 2-Channel Class AB Car Amplifier

HED Series 2-Channel Class AB Car Amplifier • 40W RMS x 2-Chan. @ 4 ohm • 75W RMS x 2-Chan. @ 2 ohm • 150W RMS x 1-Chan. @ 4 ohm Bridged • PWM MOSFET Power Supply • 12dB Vega Bass Boost • Low/High Level Inputs • Variable Low/High Pass Filters • Balanced/Unbalanced Speaker Inputs

HED Series 2-Channel Class AB Car Amplifier • 40W RMS x 2-Chan. @ 4 ohm • 75W RMS x 2-Chan. @ 2 ohm • 150W RMS x 1-Chan. @ 4 ohm Bridged • PWM MOSFET Power Supply • 12dB Vega Bass Boost • Low/High Level Inputs • Variable Low/High Pass Filters • Balanced/Unbalanced Speaker Inputs

Cerwin-Vega V400.2

500W Vega Series 2-Channel Class D Car Amplifier

V400.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega V400.2

500W Vega Series 2-Channel Class D Car Amplifier

• RMS Power: 150W x 2 @ 4 ohm, 250W x 2 @ 2 ohm,
• Bridged 4 ohm: 500 watts x 1 chan.
• Tiffany Style Low Level RCA Inputs
• Dimensions: 1.93"W x 7.25"L x 8.5"H

1

• RMS Power: 150W x 2 @ 4 ohm, 250W x 2 @ 2 ohm,
• Bridged 4 ohm: 500 watts x 1 chan.
• Tiffany Style Low Level RCA Inputs
• Dimensions: 1.93"W x 7.25"L x 8.5"H

Cerwin-Vega EXL-350.2

EXL-350.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega EXL-350.2

350 Watt 2-channel A/B bipolar power amplifier • 175W x 2 @ 2 ohm RMS • 110W x 2 @4 ohm RMS • Bass boost • High/Low crossover

1

350 Watt 2-channel A/B bipolar power amplifier • 175W x 2 @ 2 ohm RMS • 110W x 2 @4 ohm RMS • Bass boost • High/Low crossover

Cerwin-Vega SRPM7002D (Open Box, Complete)

700W RMS RPM Series Class-D 2-Channel 2-Ohm Stable Marine Amplifier

SRPM700.2D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega SRPM7002D (Open Box, Complete)

700W RMS RPM Series Class-D 2-Channel 2-Ohm Stable Marine Amplifier

• 200 Watts RMS x 2 @ 4 ohm
• 350 Watts RMS x 2 @ 2 ohm
• Conformal Coating Protects Against Moisture
• Aluminum Heatsink

• 200 Watts RMS x 2 @ 4 ohm
• 350 Watts RMS x 2 @ 2 ohm
• Conformal Coating Protects Against Moisture
• Aluminum Heatsink

Cerwin-Vega Vega V250.2

2-Channel Amplifier (Vega 250.2)

Vega-V250.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega Vega V250.2

2-Channel Amplifier (Vega 250.2)

Vega Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 125W x 2 chan. @ 2 ohm • 250W x 1 chan. @ 4 ohm bridged • Pulse with modulated (PWM) MOSFET Power supply • Tuned Bass EQ (0-12 dB bass boost at 45 Hz) • Preamp RCA outputs

Vega Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 125W x 2 chan. @ 2 ohm • 250W x 1 chan. @ 4 ohm bridged • Pulse with modulated (PWM) MOSFET Power supply • Tuned Bass EQ (0-12 dB bass boost at 45 Hz) • Preamp RCA outputs

Cerwin-Vega HED3600.2

600W Max 2-Channel HED3 Series Class AB Car Power Amplifier

HED3600.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega HED3600.2

600W Max 2-Channel HED3 Series Class AB Car Power Amplifier

• 80W x 2 Chan. @ 4 ohm
• 160W x 2 Chan. @ 2 ohm
• 320W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

2

• 80W x 2 Chan. @ 4 ohm
• 160W x 2 Chan. @ 2 ohm
• 320W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

Cerwin-Vega HED31000.2

1000W Max 2-Channel HED3 Series Class AB Car Power Amplifier

HED31000.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega HED31000.2

1000W Max 2-Channel HED3 Series Class AB Car Power Amplifier

• 100W x 2 Chan. @ 4 ohm
• 200W x 2 Chan. @ 2 ohm
• 400W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

• 100W x 2 Chan. @ 4 ohm
• 200W x 2 Chan. @ 2 ohm
• 400W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Illuminated Cerwin-Vega Badge

Cerwin Vega V7500.2D

2-Channel / 250Wx2@4

No picture DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin Vega V7500.2D

2-Channel / 250Wx2@4

• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7

• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7

Cerwin-Vega B2

500W 2-Channel Bomber Series Class D Digital Amplifier

B2-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin-Vega B2

500W 2-Channel Bomber Series Class D Digital Amplifier

• RMS Power: 150W x 2 @ 4 ohm, 250W x 2 @ 2 ohm
• Auxiliary for use when RCA connections are not available
• Ultra Compact High Density Aluminium Alloy Chassis
• Direct FET Power Mosfet Output Stage
• Dimensions: 1.4"W x 4.02"L x 6.61"H

5

• RMS Power: 150W x 2 @ 4 ohm, 250W x 2 @ 2 ohm
• Auxiliary for use when RCA connections are not available
• Ultra Compact High Density Aluminium Alloy Chassis
• Direct FET Power Mosfet Output Stage
• Dimensions: 1.4"W x 4.02"L x 6.61"H

Cerwin Vega Mobile XED7600.2

600W Max (240W RMS) XED Series 2-Channel Amplifier

XED7600.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Cerwin Vega Mobile XED7600.2

600W Max (240W RMS) XED Series 2-Channel Amplifier

• 60W RMS x 2 @ 4 ohm
• 85W RMS x 2 @ 2 ohm
• 240W RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 600W
• High Pass, Low Pass and Full Crossover Switch
• Proprietary Vega Boost
• Aluminum Heatsink
• Dimensions: 8.875" W x 10.6" L x 2.187" H

• 60W RMS x 2 @ 4 ohm
• 85W RMS x 2 @ 2 ohm
• 240W RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 600W
• High Pass, Low Pass and Full Crossover Switch
• Proprietary Vega Boost
• Aluminum Heatsink
• Dimensions: 8.875" W x 10.6" L x 2.187" H

 
    Clear all

    Cerwin-Vega 2-Channel Amplifiers Information

    A 2 channel car amplifier from Cerwin Vega will provide your vehicle with the power it requires. These amps can operate two channels and Cerwin Vega is a leader in amplification solutions. Power your speakers with a Cerwin Vega 2-channel amplifier for a great all around sound.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2011 Kia Optima

    2011 Audi TT

    2013 Ford Mustang

    2008 Dodge Avenger

    2010 Subaru Legacy

    2017 Ford Escape

    2000 Pontiac Sunfire

    2019 Buick Envision

    1995 Chrysler Concorde

    1989 GMC G3500

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2011 Optima
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo