Garage
Shop

See all parts that fit your 1957 Thunderbird

Polk Audio PA D2000.2 (PAD2000.2) - Open Box, Acceptable but Missing part(s) (Used)

500W RMS PA D Series Class-D 2-channel Car Amplifier

Polk Audio
Shop all Polk Audio
highlight-star-icon

• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

Learn more about the LS-pad20002-OBM4

We apologize

This item has been discontinued

Description


Polk Audio brand icon

Authorized dealer

Item Condition - Open Box, Great:

This product works like new, is well-cared-for and in great condition. May show limited signs of wear or use and may be missing non-essential parts, accessories or original packaging.

Item Condition - Open Box, Acceptable but Missing part(s):
An Acceptable Open Box used product is fairly worn and used, but functions and works. Signs of wear can include aesthetic issues such as scratches, dents, and worn corners or installation marks. The product may have identifying markings on it or show other signs of previous use. Additionally, the product is missing one or more part. Please see below for details, as well as the "What's in the Box" section under features and specs for a list of what is included. Original packaging, paperwork or protective wrapping may be missing or not included. Warranty details, if any, are included in the item description or comments.

Details on missing parts:
  • Detail 1: Amp only
Polk Audio PA D2000.2

Taking the Polk Audio PA D Series Into the Digital Era

The PA D2000.2 is Polk Audio's new high-efficient digital 2-channel amplifier. This amplifier is perfect for when looking to amplify a set of high quality car speakers or even entry level subwoofers within the respective ohm power rating. For example running a Polk Audio DB1040DVC in parallel to a final impedance of 2 ohms is entirely possible with this amplifier and since you have two channels you can actually run 2 of those subs, each to its own channel. This 2-channel amplifier gives you a variety options to better suit your own personal needs.

How does Polk Audio improve on their already popular and very well known PA D series amplifiers? With technology advances, Polk Audio has taken their PA D series into the digital amplification arena. This means a smaller foot print, a super-efficient design which allows for lower power consumption and does away with a larger power supply. This allows the new digital PA D series amplifiers to run far more efficiently with lower distortion and cutting or clipping. The new PA D Digital series amplifiers are available in a monoblock, 2-channel, 4-channel, and 5-channel configuration making them accessible for any application. With a height of under 2 inches for all four configurations, these amplifiers also offer a mounting convenience making them practically perfect for any vehicle. All four configurations feature a 4-way protection circuitry and stainless steel hardware that will not corrode, giving the amplifier longevity and a sleek and stylish look. Polk Audio is a known and trusted company and with these new PA D Digital series amplifiers not only are you getting the high Polk Audio quality, you are now getting the quality in a very high and efficient digital range.

Product Features:


 

 
  • PA D Series 2-Channel Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohm: 125 watts x 2 chan.
    • 2 ohm: 250 watts x 2 chan.
    • Bridged, 4 ohm: 500 watts x 1 chan.
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • Mono or 2-Channel Operation
  • LED power (blue) and protect (red) indicators
  • Soft start turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-way protection circuitry (thermal, overload, reverse polarity & speaker short protection)
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity: 200mV - 6V
  • Frequency Response: 20 - 20,000 Hz
  • Damping Factor: >100
  • Total Harmonic Distortion (THD): <0.1%
  • Signal to Noise Ration: 105 dBA
  • Selectable crossover modes: FULL / HPF / LPF
  • x10 Frequency Multiplier, Both Channels
  • Variable high-pass filter: 20 - 400 Hz (x10 Capable), 12 dB/octave
  • Variable low-pass filter: 50 - 500 Hz (x10 Capable), 12 dB/octave
  • Fuse Rating: 25A x 2
  • Supply Voltage: 10V - 16V
  • 12 AWG Speaker Connections
  • 4 gauge OFC power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
  • Dimensions: 6-3/4"W x 8-1/4"L x 1-13/16"H
  • Authorized Internet Dealer
  • 90 Day Sonic Electronix Warranty
Check out the Polk Audio PA D2000.2 Owner's Manual Important Note: Early versions of this amplifier included a "Terminal Adapter". As of 2015, Polk Audio has confirmed that they are no longer sending this adapter with their amplifier, albeit referenced in the user manual. We apologize for any inconvenience, and suggest browsing our selection of "Gauge Adapters" if you wish to use larger than recommended wiring. Thank you!

Specifications & Details


Power Specifications - Full Range Channels
RMS Power @ 4 ohms
125 watts x 2 channel
RMS Power @ 2 ohms
250 watts x 2 channel
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
500 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
2-Channel
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohm
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<0.1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
20 - 4000 Hz
Low-Pass Crossover Frequency
50 - 5000 Hz
Signal-to-Noise Ratio
105 dB
Remote bass/level controller
No
Fuse Rating
25A x 2 
Strappable
No
Sonic Certified Amplifier
Not Tested
Warranty and Return Policy
Parts Warranty Duration
90 days
Labor Warranty Duration
90 days
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

PA D2000.2-3

Weight:

4.50lbs

Internal SKU:

LS-pad20002-OBM4

Internal Product ID:

137451

Customer Ratings & Reviews


Polk Audio PA D2000.2 (PAD2000.2) - Open Box, Acceptable but Missing part(s) (Used) thumbnail image

5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Related Searches


Save up to 10 different vehicles in your garage
Vehicle
Store
Delete

1957 Ford Thunderbird

1996 Mercury Sable

2018 Audi A6

2006 Lincoln LS

2013 Kia Sorento

2009 Ford Escape

2018 Mazda CX-9

2020 Mazda 3

Add vehicle Clear all vehicles
Where to find vehicle info
Are you sure you want to clear your garage?
This action cannot be undone. Confirm
This page was not designed for products.
If you continue, you will be redirected to a category customized for your vehicle. Continue
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.