Discontinued 2-Channel Amplifiers

Phantom Series 2-Channel Class A/B Car Amplifier • RMS: 200W x 2 Chan. @ 4 ohm • 1000W Max • MOSFET PWM Power supply • Wired remote bass level control • Heavy-duty heatsink • Low- and high-pass crossover

Item is opened, unused, and is in Like New condition
• 230W x 2 Chan. @ 4 Ohm
• 600W x 2 Chan. @ 2 Ohm
• 1200W Max Bridged
• Soft Turn-On Circuit
• Nickel-Plated Terminals
• Variable Bass EQ

• Bridged, 4 ohm: 500 watts x 1 chan.
• Aluminum Woofer Cone
• Santoprene Rubber Surround
• Cast Aluminum Frame
• Radial Finned Heat Sink
• Special Spider Design
• Auxiliary for use when RCA connections are not available
• Ultra Compact High Density Aluminium Alloy Chassis
• Direct FET Power Mosfet Output Stage
• Dimensions: 1.4"W x 4.02"L x 6.61"H

Power Series 2-Channel Class A/B Car Amplifier • 150W Max • 50W x 2 Chan. @ 2 Ohm • 40W x 2 Chan. @ 4 Ohm • Tri-Mode Speaker Capability • Fully Selectable Crossover • 3-Way System Protection Circuitry

3200W Max, High Current Series 2-Channel Amplifier • 1600W RMS @ 1 ohm • 800W RMS @ 2 ohm • 400W RMS @ 4 ohm • Blue Illuminated VU Meter • Beautiful Chrome Design Heatsink • S/N Ratio: 100dB • Bass Boost: 0-18dB

1200W RMS 2-Channel Amplifier • 300W RMS x 2 @ 4 Ohm • 500W RMS x 2 @ 2 Ohm • Full MOSFET Circuitry • High/Low Level Inputs • Variable High/Low Pass Cross-Over (40 - 250Hz) • 0 - 18dB bass Boost

• Item Condition: Open Box
• 4 ohm: 125 watts x 2 chan.
• 2 ohm: 150 watts x 2 chan.
• Bridged, 4 ohm: 300 watts x 1 chan.
• Oxygen-Free Copper Wire Coil for Output
• TVC(Total Volume Control) Increases Signal-to-Noise Ratio

2-Channel Bridgeable Amplifier • Wired Bass Remote with Frequency Control Included • 250W RMS x 2 @ 2 • High and Low Inputs • Adjustable Crossovers and Input Sensitivity

Chaos Epic Series 2-Channel Power Amplifier • 300W RMS • 500W Max • MOSFET Power Supply • LED Power and Protect Indicators • Variable Input Gain Control • 2-Way System Protection Circuitry • Heavy Duty Black Anodized Aluminum Heatsink

• RMS Power: 300W x 2 @ 4 ohm, 600W x 2 @ 2 ohm
• Total Peak Power: 1200W
• Variable Low-Pass Filter (50-250 Hz, 24 dB/octave)
• Dimensions: 9.5"W x 12.25"L x 2.125"H

• RMS: 150W x 2 @ 4 ohm, 300W x 2 @ 2 ohm
• 600W RMS x 1 Channel @ 4 Ohm Bridged
• Pulse Width Modulated MOSFET Power Supply
• LED Status Indicator
• Fully Adjustable Bass EQ
• 3-Way System Protection
• Low Level Line Inputs
• Aluminum Finned Heatsink

Zeus ZXI AB Car Amplifier • 2-Channel Operation• 250W x2 Chan. @ 4 Ohm • 500W x2 Chan. @ 2 Ohm • Ultra-Fi MOSFET Power Supply • Built-In System Diagnostics • Crossover Selector • Aluminum Alloy Vented Heatsink •

Zeus Series 2-Channel Class A/B Amplifier • 500W x 2 Chan @ 2 Ohm • 1000W x 1 Chan @ 4 Ohm Bridged • Illuminated Logos • Bass Remote Included • Adjustable Input Gain • 0-18dB Bass Boost • Ultra-Fi Outputs • Built-In Crossover

220W RMS Pwr x 1 CH Bridged Mono @ 4 Ohm • 110W RMS Pwr x 2 CH @ 2 Ohm • 80W RMS Pwr x 2 CH @ 4 Ohm • Frequency Response ±0.5dB 10Hz-20kHz

PB Series 2-Channel Class AB Car Amplifier • 100W x 2 chan. @ 4 ohm • 156W x 2 chan. @ 2 ohm • 600 watts x 1 chan. Max • LED power and protection indicators • Tuned Bass EQ (0-18 dB bass boost) • Metallic finish and plating

BAMF Series 2600W Max 2-Channel Class AB Amplifier • 450W x 2 Chan @ 4Ohm • 540W x 2 Chan @ 2Ohm • 2600W x 2 Chan Max • MOSFET power supply • Full Selectable Crossover • Tri-mode capable • Heavy duty aluminum alloy Heatsink

820 watts 2-channel car amplifier • 230 watts RMS x 2 chan @ 2 ohm • 180 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >98 dB

• 2-Channel Class FD Car Amplifier
• 4 ohm: 125 watts x 2 chan.
• 2 ohm: 150 watts x 2 chan.
• Bridged, 4 ohm: 300 watts x 1 chan.
• Oxygen-Free Copper Wire Coil for Output
• TVC(Total Volume Control) Increases Signal-to-Noise Ratio

• Gothic Series 2-Channel Car Amplifier
• 370W x 2 Chan. @ 4 Ohm
• 450W x 2 Chan. @ 2 Ohm
• Bridged 900W x 1 Chan. @ 4 Ohm
• Pulse Width Modulation Circuitry
• Tri-Mode Capable
• LED Power Indicators
• Level Inputs

500W 2-Channel Amplifier • 180W x 2 chan. @ 4 Ohm • 250W x 2 chan. @ 2 Ohm • full MOSFET circuitry • line inputs/outputs • adjustable input sensitivity • power/protection LED • S/N ratio: 90dB