Discontinued Programmers, Testers, & Meters

• Measures sound pressure level (SPL)
• Measures Voltage
• Amplitude range from 120 to 160 dB
• Frequency range from 20 to 120 Hz
• Calibrated according to TERM-LAB Classic and Magnum
• Bright display for easy visibility

• Calibration CD for JL Audio CleanSweep
• Contains Tracks for General System Tuning
• Channel & Phase Identification
• Pink Noise
• Sine Waves

60 - 130db Handheld SPL Meter • Compact Size • Handheld • Accurate Readings

• Sound Test Kit
• Phase Tester, Probes, C-D Included
• Built-in microphone
• Built in pulse generator for both speaker level and preamp level connections directly to a component (speaker, amplifier, signal processor, etc.)

Digital Multimeter • Tests Cell Phones or Other Batteries • 10 MegOhm • Tests 110 and 220 Volt AC Household Circuits • Displays DC Current/Amperage

Mobile Electronics Installation Kit • Multimeter / Crimper / Multi-bit Screwdriver / Dash Panel & Trim Piece Removal Tool / Wiring Hardware (Butt Connectors)

• Calibrated, full range, omni-directional test and measurement microphone
• Direct connection to iOS devices running iOS 6.1 or later
• Redesigned to minimize the effect of high-frequency diffraction
• Features increased max SPL handling – up to 140 dB SPL
• Keeps iOS device charged during extending use with included AC adapter

60 - 130db Handheld SPL Meter • Compact Size • Handheld • Accurate Readings

• Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff

• USB PC Update Cable For Select Axxess Interfaces
• USB To PC Interface To Download Firmware Updates
• Updates Ensure Compatibility

Bitwriter Upgrade Chip Version 2.6 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

• Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff

• Allows the ability to update Axxess interfaces from most smart devices
• Freedom to update without a computer
•Must be connected to either a cellular network or Wi-Fi hotspot to update
• Allows changes to be made to the ASWC-1 (dual assign / force radio / re-assign buttons)
•Universal

Bitwriter Upgrade Chip Version 2.7 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

• 3-Digit LED Digital VoltMeter
• Silver Surface w/ Red Digital Display
• Flush or Surface Mountable
• Durable Rubberized Finish
• Auto-Sensing Turn On

Bitwriter Upgrade Chip Version 2.3 • Used To Replace The Older Model Bitwriter Chips • Upgrade Chip Allows Your Old Bitwriter To Program All The Latest Directed ESP Alarm And Remote Start Systems

Digital Multi-Meter

Distortion Detector/Analyzer for High(er) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 200Vrms. (40,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

The GEN1KHD is used for identifying speaker wires in car audio systems, provides a calibrated output for setting component output levels, and is an effective tool for determining how noise is entering a car audio system.

Battery Tester for 6v/12v Applications

• Dynamic voltage drop testing
• Voltage snapshot
• Min/Max glitch capture
• Power and ground LED indicatorsRE 7

Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms

Speakers must operate with the same relative polarity for proper sound reproduction, the PLR1 allows for one to test the polarity of every individual speaker

• Adjustable Alternator Voltage Boost Module
• Includes In-Dash Controller
• Blue LED Voltmeter Displays the Charging Voltage
• For Select 1996–2004 GM Vehicles

The SoundGate GENSWEEP variable sweep tone (20 Hz - 20 KHz) generator is used for identifying speaker wires in car audio systems, provides a calibrated output for setting component output levels, and is an effective tool for determining how noise is entering a car audio system.

• Allows Quick and Easy Programming of the SWI-RC, SWI-PS & SWI-JAC
• Can Be Used On The Bench Or In The Car
• Powered By Either 12 Volt Power Outlet Or The Supplied Two AA Batteries
• Easy To Use On-Screen Prompts

In-dash or Custom-Mount LED Sound System Output Display for Amplifier Voltage Readout • Mil Spec FR4 Circuit Board • High Speed Switching Power Supply

Tone Generator & Speaker Polarity Tester • Perfect for Safely Troubleshooting and Testing Audio Systems • Output Range of 0-8 Volts • Includes RCA & Alligator Clips for Connection • 9V Speaker Popper • Auto Shutoff

• Adjustable Alternator Voltage Boost Module
• Includes In-Dash Controller
• Blue LED Voltmeter Displays the Charging Voltage
• For Select Toyota and Lexus Vehicles

Wireless Inspection Camera • Waterproof 9mm Camera with LED lighting • 30 Foot Wireless Transmission Range • Adjustable LED Brightness • SD Card Slot

The SoundGate GENADJ variable-tone (50 Hz, 100 Hz, 200 Hz, 400 Hz, and 800 Hz) generator is used for identifying speaker wires in car audio systems, provides a calibrated output for setting component output levels, and is an effective tool for determining how noise is entering a car audio system.

• Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper • Auto Shutoff

Real Time Spectrum Analyzer And SPL Meter • Thirty Band Audio Analyzer • Better-Sounding Installations • Built-In IASCA, USACi And SPL Countdown Scoring • 136dB Standard Microphone

• Adjustable Alternator Voltage Boost Module
• Includes In-Dash Controller
• Blue LED Voltmeter Displays the Charging Voltage
• For Select Toyota and Lexus Vehicles

Inspection Camera • Waterproof 9mm Camera with LED lighting • Optional Extension Tube • Adjustable LED Brightness • SD Card Slot • TV/Video Output • Zoom Capability

Audio Frequency Generator Installation Tool • Allow you to Generate Frequencies for Each One of your Speakers • 3-Position Frequency Range Selector • Volume Control Knob • Frequency Control Knob

CAN Test tool for identifying CAN outputs in vehicles equipped with CAN-Bus systems

Allows For Easy Inspection Or To Locate Items In Hard To Reach Or See Areas • 2.4" Detachable Wireless Color Monitor Offers Full Image Control & Tv/video Output Jack • 3-ft Flexible Camera Tube Provides Easy Reach Beyond Arm's Length • 9mm Waterproof Aluminum Camera Head • Useful For Inspecting Air Conditioning Vents, Plumbing Pipes, Under Or Around Furniture & Appliances, Home Theater Installations, Cable Routing, Pest Control & Machinery Inspection • Includes Mirror, Magnet, & Hook Clip

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• Includes audio tracks for tuning (sine, sweep-tones, noise)
• Amplitude range from 110 to 190 dB
• Frequency range from 10 to 120 Hz
• Free software for Windows
• Vacuum suction cup included