Car Amplifier Packages & Bundles for your 1981 633CSi

• Kicker L7S102 1200W Peak 10-Inch Solo-Baric Dual 2-Ohm Subwoofer
• NVX VADM1 v2 600W RMS Class D Monoblock Amplifier with Bass Remote
• XKIT82 Full Spec 8 Gauge 100% OFC Oxygen Free Copper Wiring Kit
• Comprehensive installation kit includes 2-channel RCA and support for up to 800W
• Complete car marine and powersports audio solution for deep accurate bass

• Kicker 300W Peak (150W RMS) 10" Downward Firing Sealed Subwoofer Enclosure
• 400W RMS Class D Monoblock Car Amplifier
• Belva 8 Gauge Complete 2-Channel Amplifier Wiring Kit with RCA
• NVX Premium Polyurethane Foam Can Insulator Sleeve Koozie
• Wired Bass Remote Controller for CX-Series Amplifiers

• PM100X1K
• Punch Marine 100 Watt Full-Range Mono Amplifier (pair)
• Number of Channels: 1
• Frequency Response: 60Hz - 20kHz +/- 1.0dB
• Includes NVX XKIT82 8 Gauge Amp Wiring Kit

• 500 Watts RMS x 1 @ 4 ohm
• 750 Watts RMS x 1 @ 2 ohm
• 750 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1500 Watts
• CEA-2006 Compliant
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Dual extruded heat sinks
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Real time thermal sensing with Rollback technology
• Dimensions: 4.3"W x 8.3"L x 1.6"H

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

• 65 Watts RMS x 4 @ 4 ohm
• 95 Watts RMS x 4 @ 2 ohm
• CEA-2006 Compliant/Preamp Outputs/LPF
• Corrosion Protection
• Water jet tested
• Dimensions: 12.40" x 7.48" x 1.97"

• Class D Amp Technology
• 4 Ohm: 600 Watts RMS x 1
• 2 Ohm: 1000 Watts RMS x 1
• Variable Crossover and Bass Boost
• Turn-On Mode Switch

• 75 Watts RMS x 4 @ 2 ohm
• 2 ohm: 300 watts x 1 chan. Subwoofer Channel
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Tuned Bass EQ: 0 to +18 dB
• Super Efficient Class BD Circuitry
• Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H

• 75W x 4-Chan. @ 4 ohm
• 150W x 4-Chan. @ 2 ohm
• Built In NOMAD "Real Time" Analog Computer
• 4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

• RMS: 100 watts x 4 chan. @ 4 ohm, 100 watts x 4 chan. @ 2 ohm, 200 watts x 2 chan. @ 4 ohm Bridged
• CEA-2006 Compliant Amplifier
• Rockford Fosgate 4/2 Ohm muti-impedance Constant Power technology
•Differential inputs with high level auto turn-on feature
• C.L.E.A.N. input/output clip detection and indicator LEDs
• 4-layer 2oz. copper circuit board with 2-part epoxy coating

• 300 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 130 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 220 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 420 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1480 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier
• Includes Amplifier Wiring Kit

• 90 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Marine Amplifier
• Includes Amplifier Wiring Kit

• Kenwood KAC-D8105 5 Channel Amplifier
• Peak Power: 1600 watts
• 50 watts RMS x 4 + 300 watts at 4 Ohm
• 75 watts x4 + 500 watts at 2 Ohm
• Dimensions: 9"W x 2-3/16"H x 7-3/8"D

• Includes Amplifier Wiring Kit

• 500 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• RMS: 150 x 4 @ 4 ohm, 250W x 4 @ 2 ohm, Bridged 500W x 2 @ 4 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Efficient Full Range Class D Design
• Includes Amplifier Wiring Kit

• 200 Watts RMS x 1 @ 4 ohm
• 400 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1600 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• 4.25"W x 7.99"L x1.6 "H
• Includes Amplifier Wiring Kit

• RMS: 200 Watts x 2 @ 4 ohm, 250 Watts x 2 @ 2 ohm, Bridged: 500 Watts x 1 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High-Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 6.61" L x 1.40" H

• 1000W RMS
• 250W x 4-Chan @ 4 Ohm
• NOMAD Real Time Computer Protection
• 50-500 Hz LP/AP/HP Crossovers
• Constant Power