Car Amplifier Packages & Bundles

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• Class H Amp Technology
• 4 Ohm Stable Bridged: 200 Watts RMS x 2
• Variable High and Low-Pass Filters
• Variable Crossover
• Full On Board Protection

• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• 40 watts RMS x 4 @ 4 ohm
• 80 watts RMS x 4 @ 2 ohm
• 320 watts Total Power
• Switchable High-Pass Filters
• 0-12dB Boost
• Aluminum Heatsink
• Dimensions: 3.7" W x 5.51" L x 1.77" H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

• 185 watts x 4 channel @ 4 ohm
• 375 watts x 4 channel @ 2 ohm
• Bridged: 750 watts x 2 channel @ 4 ohm
• Total RMS Power: 1500 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• DS18 SMD-300.4AB 1200W RMS Class AB 4-Channel Car Amplifier
• Wired Bass Remote for Precision Level Control
• NVX XKIT44 Full Spec 4 Gauge 100% OFC Wiring Kit
• Complete 4-Channel Copper Installation Solution with RCA
• High-Performance Setup for Amplifiers up to 1500 Watts

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• 4 ohm: 325 Watts x 1 chan. / 2 ohm: 600 Watts x 1 chan. / 1 ohm: 1200 Watts x 1 chan.
• Total power output: 1200 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz
• Includes Amplifier Wiring Kit

• DS18 SMD-2800.5 2800W RMS Class AB/D SMD Series 5 Channel Car Amplifier
• Includes wired bass remote for easy output adjustment
• Full Spec 1/0 Gauge 100% Oxygen Free Copper Dual Amplifier Power Wiring Kit
• 6 Meter N Series 2-Channel and 4-Channel RCA Audio Interconnect Cables
• Complete installation solution rated for high-power systems up to 4000 Watts

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• DS18 SMD-2000.1D 2000W RMS Class D SMD Series Monoblock Car Amplifier
• Wired Bass Remote for Easy Level Control
• NVX XKIT02 100% Copper 1/0 Gauge True Spec Amplifier Installation Kit
• 1.0 Farad Digital Power Capacitor
• Complete Wiring Solution includes RCA Interconnects and 20 ft Speaker Cable

• DS18 SMD-5000.1D 5000W RMS Class D Monoblock Car Amplifier
• Integrated VM-1 Voltmeter and Digital RGB LED Lights with Remote
• NVX 1.0 Farad Digital Power Capacitor and Bass Remote
• True Spec 1/0 Gauge 100% Copper Amplifier Installation Kit
• Complete Wiring Solution with RCA Interconnect and 20 ft Speaker Cable

• 5-Channel amplifier
• RMS Power: _125W x 4 @ 4 ohm, 200 W x 4 @ 2 ohm, 500W x 1 @ 2 ohm
• Select summing capabilities
• Eight speaker input

• RMS: 75 watts x 4 chan. + 150 watts x 1 chan. @ 4 ohm, 125 watts x 4 chan. + 300 watts x 1 chan. @ 2 ohm
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT46 4 Gauge Amp Wiring Kit

• 4 ohm: 50 watts x 4 chan.
• 2 ohm: 75 watts x 4 chan.
• Total Peak Power: 600 Watts
• Speaker Level Input
• Signal Sensing Turn-On
• Variable Low Pass/High Pass Filter
• Includes Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

• Variable Electronic Crossover
• Bass Remote Included
• Subsonic Filter
• Switchable Bass Boost

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
• Includes Amplifier Wiring Kit