Line Out Converters

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 55 watts per channel
• Features a T-harness that installs quickly

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 2-Channel Line Out Converter
• 2 inputs and 2 outputs
• Compact design

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Retains factory wiring integrity
• Plug and Play T-Harness allows for faster installation

• Gain Controller is included
• 55 watts per channel
• Features a T-harness that installs quickly

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Fits select 2018-2023 Ford vehicles
• Color coded wires for easy installation
• No cutting or splicing required

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 5-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• Retains factory wiring integrity
• Plug and Play T-Harness allows for faster installation

• 2-Channel Speaker High->Low Level Converter
• Accepts head units with 80 watts per channel
• Transformer circuit for noise cancellation

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

• 6-channel audio integration interface
• Designed to integrate with factory OEM systems
• 6 channel analog output (Front L/R, Rear L/R, Sub and Center)
• Compatible with select 2010-2025 vehicles from GMC, Chevrolet, Cadillac with factory BOSE audio systems

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• 2-Channel line output converter harness kit

• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-Channel Line Output Converter
• Designed for adding or retaining an amplified system
• Accepts both high-level and low-level inputs
• Remote level controller included

• LPH speaker extension harness
• Compatible plugs and color-coded wires
• Length: 17 feet

• 4-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• Retains factory wiring integrity
• Plug and Play T-Harness allows for faster installation

• Line out converter for adding amplifier to factory radio
• Auto remote turn on
• 6:1 step down with adjustable output
• 100 Watts Max
• 50 Watts max per channel

• Digital bass processor with 2-channel line output converter
• 2-channel RCA input for aftermarket sources
• Selectable signal sensing or direct turn on
• Includes dash mount remote

• Retains factory wiring integrity
• Plug and Play T-Harness allows for faster installation

• Two Channel Output Converter
• Gold Plated RCA Jacks
• Stinger Select Series

• Retains factory wiring integrity
• Plug and Play T-Harness allows for faster installation

• Plug and play T-Harness allows for faster installation
• AXSUB-GM5 Interface and Bass Knob for subwoofer level control
• Micro USB updateable

• 2-Channel line output converter with amplifier turn-on
• Adjustable gain for each channel
• Small and compact in size
• Detects presence of audio signal

• 8-Channel Line Out Converter
• Auxiliary input for iPod, satellite radio, or other audio sources
• Dash control for subwoofer level, auxiliary volume, and source selection

• 4-channel active line out converter
• Speaker Level handles up to 400W RMS
• Selectable turn-on mode
• 9.5Vrms output
• 12-volt turn-on lead output

• Adjustable 2-channel line output converter
• 2-channel input
• Separate level adjustments for each channel
• Molded channels

• Universal 2-Channel line output converter
• Features short circuit protection
• 6:1 step down with variable output
• Corrects crossover distortion
• Detachable input plug and gold plated RCAs

• Add-a-sub interface for select 2010-2025 vehicles from Chevrolet, GMC, Cadillac
• 2 Channel non-fading 5V RMS output
• Designed for amplified and non-amplified vehicles
• Install done at radio location

• 5-Channel line output converter
• 2/5-Channel input configurations
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection

• 4-Channel High-to-Low Level Converter
• High-to-Low Signal Converter to Connect 4-Channel Amplifiers to Radios Without RCA Output
• Output Voltage: Up to 3V (low-level)
• Mounting: Behind Dash

• 4-Channel Line Output Converter
• Connects the speaker level to RCA line level
• Perfect for connecting a factory stereo to an aftermarket amplifier
• Gold plated RCA connections

• Universal 4-channel line-out converter
• 80 watts peak input per channel, with 12 volts signal sense
• Adjustable gain for each channel
• Input circuit corrects crossover distortion found on other brands

• 2-channel input
• Molded channels for zip ties will not slip
• 12-volt signal sense turn-on
• Universal application

• Fixed level
• 2-channel input
• 30-watts maximum input

• Plug and Play Design (No cutting or splicing)
• Peak Input: 80 watts
• Designed to provide 4 channels of low-level audio

• 6-Channel line output converter
• 2/6-Channel input configurations
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection
• Dash remote bass level control included