SMD DD-1 Distortion Detector/Analyzer
Amplifier Signal Distortion Detector
Amplifier Signal Distortion Detector
• Distortion Detector/Analyzer (DD1)
• Distortion Detector's Circuitry Is 100% Analog
• Distortion Detection Trigger Level > 1.0% Harmonic Distortion
• Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
• Signal Present LED Trigger Voltage 750mVrms
• Distortion Detector/Analyzer (DD1)
• Distortion Detector's Circuitry Is 100% Analog
• Distortion Detection Trigger Level > 1.0% Harmonic Distortion
• Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
• Signal Present LED Trigger Voltage 750mVrms
Belva BAMMD3
Automotive 9-Function Digital Multimeter Tester
Automotive 9-Function Digital Multimeter Tester
• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads
• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads
SMD DD-1+
Distortion Detector/Analyzer
Distortion Detector/Analyzer
• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in
• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in
NVX XTGSP2
Tone Generator and Speaker Polarity Tester
Tone Generator and Speaker Polarity Tester
• Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff
• Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff
SMD AMM-1
Audio Multimeter
Audio Multimeter
• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference
VIP Product Get $45.90 in rewards to spend later
• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference
Steve Meade Designs IM-SG
Impedance Meter / Signal Generator
Impedance Meter / Signal Generator
• Impedance Meter/Signal Generator
• Obtains Driver's T/S Parameters
• Find Tuning Frequency of Passive Radiator
• Locate Rattles in Vehicle
• Impedance Meter/Signal Generator
• Obtains Driver's T/S Parameters
• Find Tuning Frequency of Passive Radiator
• Locate Rattles in Vehicle
AudioControl DM-RTA BASE KIT
Hard Case and Accessory Base Kit for AudioControl DM-RTA
Hard Case and Accessory Base Kit for AudioControl DM-RTA
• Hard case and accessory kit for AudioControl DM-RTA
• Laser-cut foam interior
• Includes all necessary hardware and accessories
VIP Product Get $47.90 in rewards to spend later
• Hard case and accessory kit for AudioControl DM-RTA
• Laser-cut foam interior
• Includes all necessary hardware and accessories
PAC TL-PTG2 (TLPTG2)
Tone Generator and Speaker Polarity Tester with RCA Cable Tester
Tone Generator and Speaker Polarity Tester with RCA Cable Tester
&bull Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff
VIP Product Get $4.60 in rewards to spend later
&bull Tone Generator
• Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff
Install Bay IBR68
Multipurpose Tester with 9V Tone Generator
Multipurpose Tester with 9V Tone Generator
• All In One Tester/Tone Generator
• Speaker tester with 9V
• RCA cable tester
• Easy to use control knobs
• Auto off function
• All In One Tester/Tone Generator
• Speaker tester with 9V
• RCA cable tester
• Easy to use control knobs
• Auto off function
Soundstream BX-LOC2
Digital Bass Reconstruction Processor with 2-Channel Line Output Converter
Digital Bass Reconstruction Processor with 2-Channel Line Output Converter
• Digital bass processor with 2-channel line output converter
• 2-channel RCA input for aftermarket sources
• Selectable signal sensing or direct turn on
• Includes dash mount remote
• Digital bass processor with 2-channel line output converter
• 2-channel RCA input for aftermarket sources
• Selectable signal sensing or direct turn on
• Includes dash mount remote
SMD CC-1 Crossover Calibrator
Crossover Calibrator (CC1)
Crossover Calibrator (CC1)
• Crossover Calibrator
• Also Matches The Gain Settings On Amp(s)
• Circuitry Is Digital Microprocessor Controlled
• Crossover -3dB Point Accuracy +/- 0.25dB
• Auto-Shut Off Timer
• Crossover Calibrator
• Also Matches The Gain Settings On Amp(s)
• Circuitry Is Digital Microprocessor Controlled
• Crossover -3dB Point Accuracy +/- 0.25dB
• Auto-Shut Off Timer
AudioControl DM-RTA
5-in-1 Real Time Audio Signal Analyzer and Multi-Test Tool
5-in-1 Real Time Audio Signal Analyzer and Multi-Test Tool
• Real Time Analyzer and Multi-Test Tool
• Tests and measures acoustical, line-level, and speaker-level signals
• Microphone input and digital/USB outputs
• Optional Bluetooth connectivity
• Compatible with DM-RTA app
VIP Product Get $94.90 in rewards to spend later
• Real Time Analyzer and Multi-Test Tool
• Tests and measures acoustical, line-level, and speaker-level signals
• Microphone input and digital/USB outputs
• Optional Bluetooth connectivity
• Compatible with DM-RTA app
SMD DD-1 + CC-1
SMD DD-1 Distortion Detector + CC-1 Crossover Calibrator Combo Pack
SMD DD-1 Distortion Detector + CC-1 Crossover Calibrator Combo Pack
• Distortion Detector/Analyzer (DD1)
• Distortion Detector's Circuitry Is 100% Analog
• Distortion Detection Trigger Level > 1.0% Harmonic Distortion
• Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
• Signal Present LED Trigger Voltage 750mVrms
• Distortion Detector/Analyzer (DD1)
• Distortion Detector's Circuitry Is 100% Analog
• Distortion Detection Trigger Level > 1.0% Harmonic Distortion
• Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
• Signal Present LED Trigger Voltage 750mVrms























